Checking Fuel Filter; Inspecting Idling Speed; Changing Engine Oil - Yamaha F6 Owner's Manual
Hide thumbs
Also See for F6:
- Brochure & specs (4 pages) ,
- Owner's manual (110 pages) ,
- Owner's manual (80 pages)
Table of Contents
Advertisement
Maintenance
Checkpoints
Fuel system parts leakage
G
Fuel line joint leakage
G
Fuel line cracks or other damage
G
Fuel connector leakage
G
EMU28990
Checking fuel filter
Check the fuel filter periodically. The fuel filter
is a one piece, disposable type. If foreign mat-
ter is found in the filter, replace it. For replace-
ment of the fuel filter, consult your Yamaha
dealer.
58
EMU29041
Inspecting idling speed
EWM00451
WARNING
Do not touch or remove electrical parts
G
when starting or during operation.
Keep hands, hair, and clothes away from
G
the flywheel and other rotating parts
while the engine is running.
ECM00490
CAUTION:
This procedure must be performed while
the outboard motor is in the water. A flush-
ing attachment or test tank can be used.
A diagnostic tachometer should be used for
this procedure. Results may vary depending
on whether testing is conducted with the
flushing attachment, in a test tank, or with the
outboard motor in the water.
1.
Start the engine and allow it to warm up
fully in neutral until it is running smoothly.
NOTE:
Correct idling speed inspection is only possi-
ble if the engine is fully warmed up. If not
warmed up fully, the idle speed will measure
higher than normal. If you have difficulty veri-
fying the idle speed, or the idle speed requires
adjustment, consult a Yamaha dealer or other
qualified mechanic.
2.
Verify whether the idle speed is set to
specification. For idle speed specifica-
tions, see page 47.
EMU29073
Changing engine oil
EWM00760
WARNING
Avoid draining the engine oil immediate-
G
ly after stopping the engine. The oil is
hot and should be handled with care to
avoid burns.
- Quick Links:
- Engine Oil
Hide quick links:
Advertisement
Table of Contents
