hit counter script

Changing Gear Oil - Yamaha F6 Owner's Manual

Hide thumbs Also See for F6:
Table of Contents

Advertisement

Be sure to use a new cotter pin and bend
G
the ends over securely. Otherwise the
propeller could come off during opera-
tion and be lost.
1.
Apply Yamaha marine grease or a corro-
sion resistant grease to the propeller
shaft.
2.
Install the spacer (if equipped), thrust
washer, and propeller on the propeller
shaft.
3.
Install the spacer (if equipped) and the
washer. Tighten the propeller nut to the
specified torque.
4.
Align the propeller nut with the propeller
shaft hole. Insert a new cotter pin in the
hole and bend the cotter pin ends.
NOTE:
If the propeller nut does not align with the pro-
peller shaft hole after tightening to the speci-
fied torque, tighten the nut further to align it
with the hole.
EMU29282

Changing gear oil

EWM00800
WARNING
Be sure the outboard motor is securely
G
fastened to the transom or a stable
stand. You could be severely injured if
the outboard motor falls on you.
Never get under the lower unit while it is
G
tilted, even when the tilt support lever or
knob is locked. Severe injury could oc-
cur if the outboard motor accidentally
falls.
1.
Tilt the outboard motor so that the gear oil
drain screw is at the lowest point possi-
ble.
2.
Place a suitable container under the gear
case.
3.
Remove the gear oil drain screw and gas-
ket.
1. Gear oil drain screw
2. Oil level plug
NOTE:
If a magnetic gear oil drain screw is
G
equipped, remove all metal particles from
the screw before installing it.
Always use new gaskets. Do not reuse the
G
removed gaskets.
4.
Remove the oil level plug and gasket to
allow the oil to drain completely.
ECM00710
CAUTION:
Inspect the used oil after it has been
drained. If the oil is milky, water is getting
into the gear case which can cause gear
damage. Consult a Yamaha dealer for re-
pair of the lower unit seals.
Maintenance
2
1
ZMU02064
63

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

F8T8

Table of Contents

Save PDF