Page 2
LFO based effect, then you will be able to PLG150-Pf Piano Plug-in Board control how it works. But you will not be The PLG150-PF is a sample playback based able to change the pre-assigned Board single part plug-in board. It is based on the effect.
Page 3
This is opposed to the “BOARD” Voices bank 032/000, which are like the “raw material” that you use to build finished Motif Plug-in Voices. If your PLG150-PF is in slot 2 your screen will read P2-P, slot 3 will read P3-P.
Page 4
64 sounds based on the data on the PLG150-PF board. This Voice data will remain in memory after power down. And will be available as long as the PLG150-PF board has been detected and is in the slot. What is a Plug-in Voice and what...
Page 5
If PLG150-PF is in slot 2: 032/000 PB active in a MIX when you select the If PLG150-PF is in slot 3: 032/000 PB PLG150-PF for a PART. This is not a Motif effect – it refers to the effect processing When addressing Plug-in Board Voices available on the PLG150-PF board itself.
Page 6
• Place F1 PLAY • Select Voice H13: --Wah Clav Like the Motif itself, the PLG150-PF board can have up to 4 Elements to a Voice (see This is a Board Voice (P1-B) . Play it and the PLG150PF Owner’s Manual for listings you will see that a wah-wah effect is of Voices).
Page 7
Pitch Bend and Filter Cutoff, as well as EFFECTS – which are, of course, also Pitch Mod, Filter Mod and Amplitude Mod: available to be applied to the PLG150-PF data. The other OFFSETs you see listed refer to other specific effects, for example...