hit counter script
Miele CS 1223 Operating And Installation Instruction
  1. Manuals
  2. Brands
  3. Miele Manuals
  4. Hob
  5. CS 1223
  6. Operating and installation instruction
Miele CS 1223 Operating And Installation Instruction

Miele CS 1223 Operating And Installation Instruction

Induction wok
Hide thumbs Also See for CS 1223:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Operating and Installation Instruction
Operating and installation instructions
Induction wok
CS 1223
en - GB
To avoid the risk of accidents or
damage to the appliance, it is
essential to read these instructions
before it is installed and used for the
first time.
M.-Nr. 07 180 671

Advertisement

Table of Contents
loading

Related Manuals for Miele CS 1223

Summary of Contents for Miele CS 1223

  • Page 1 Operating and installation instructions Induction wok CS 1223 en - GB To avoid the risk of accidents or damage to the appliance, it is essential to read these instructions before it is installed and used for the first time. M.-Nr. 07 180 671...

  • Page 2: Table Of Contents

    Contents Guide to the appliance ..........4 Warning and Safety instructions .
  • Page 3 Contents Installation of several appliances........39 Fixing the spring clamps and spacer bars .

  • Page 4: Guide To The Appliance

    Guide to the appliance a Wok basin Indicators (C) 300 mm / rating: normal: 2400 W with Booster: 3200 W b Wok f In-operation indicator g Booster indicator c Control d Indicators h Residual heat indicator e Display...
  • Page 5 Guide to the appliance Display ß No wok on cooking zone, or wok unsuitable Auto heat-up Fault message (See "Problem solving guide") C / 0 Safety switch-off (See "Safety features" Booster in operation Overheating protection (See "Safety features") Lock (see "Safety features") Accessories supplied Wok (CSWP 1400) Wok rest...

  • Page 6: Warning And Safety Instructions

    Warning and Safety instructions This appliance complies with all current local and national safety requirements. Improper use can, however, present a risk of both personal injury and material damage. To avoid the risk of accidents and damage to the appliance, please read these instructions carefully before installation and before using it for the first time.
  • Page 7 The wok is intended for domestic use only to cook food and keep it warm. Any other use is not supported by the manufacturer and could be dangerous. Miele cannot be held liable for damage resulting from incorrect or improper use or operation.
  • Page 8 Warning and Safety instructions Safety with children Activate the lock to ensure that children cannot switch on the wok inadvertently. The wok is not a toy! To prevent the risk of injury, do not let children play with the appliance or its controls. Children under 8 years of age must be kept away from the wok unless they are constantly supervised.
  • Page 9 Miele cannot be held liable for the consequences of an inadequate earthing system (e.g. electric shock). Before connecting the wok to the mains electricity...
  • Page 10 Repairs and other work by unqualified persons could be dangerous. Miele cannot be held liable for unauthorised work. During installation, maintenance and repair work, the wok must be disconnected from the mains electricity supply.
  • Page 11 Miele cannot be held liable for damage caused by incorrect installation or connection.
  • Page 12 Do not leave the wok unattended whilst it is in use. If the wok pan boils dry, it could cause damage to the ceramic surface for which Miele cannot be held liable. Boiling fat or oil could ignite and cause a fire.
  • Page 13 Warning and Safety instructions Use heat-resistant pot holders or gloves when using the wok. Do not let them get damp or wet, as this causes heat to transfer through the material more quickly with the risk of scalding or burning yourself. Do not flambé...
  • Page 14 Warning and Safety instructions Do not place hot pans on the area around the display. This could damage the electronic unit underneath. Do not drop anything on the ceramic surface. Even a light object could cause damage in certain circumstances. When using an electrical appliance, e.g.
  • Page 15 Warning and Safety instructions The wok is fitted with a cooling fan. If a drawer is fitted directly underneath the wok, ensure that there is sufficient space between the drawer and its contents and the underside of the appliance in order to ensure sufficient ventilation for the wok.
  • Page 16 Only close the door when the appliance is switched off and the residual heat indicator has gone out. Miele cannot be held liable for damage caused by non-compliance with these Warning and Safety instructions.

  • Page 17: Caring For The Environment

    Caring for the environment Disposal of the packing Disposal of your old appliance material Electrical and electronic appliances often contain materials which, if The transport and protective packing handled or disposed of incorrectly has been selected from materials which could be potentially hazardous to are environmentally friendly for human health and to the environment.

  • Page 18: Before Using For The First Time

    Before using for the first time Before using for the first time Please stick the extra data plate for the appliance supplied with this When the induction wok is first documentation in the space provided in connected, and after a power cut, all of the "After sales service, data plate, the indicators in the display light up for guarantee"...

  • Page 19: Induction

    Induction The induction principle Take particular care never to place An induction coil is located underneath cutlery or other metal objects on the the induction wok. When the appliance appliance. When the appliance is is switched on, this coil creates a switched on either deliberately or by magnetic field.

  • Page 20: Suitable Pans

    Induction Suitable pans Noises The following noises might occur when Only use the wok supplied with the the induction wok is in operation: appliance for cooking food. This wok is designed specifically for the – On the higher power settings, it appliance.

  • Page 21: Operation

    Operation Switching on and off Residual heat indicator The induction wok is switched on by The residual heat indicator remains on turning the control clockwise a to the until the induction wok is cool enough power setting required, and is switched to touch.

  • Page 22: Settings

    Operation Settings When Auto heat-up has been activated, the induction wok switches on Cooking process Settings automatically at the highest setting and then switches to the continued cooking Keeping food warm, 1 - 2 setting selected. The heat-up time melting chocolate depends on which continued cooking Warming food up 3 - 6...

  • Page 23: Booster Function

    Operation Booster function To switch on the booster function ^ Turn the control past power setting 9 The induction wok is equipped with a booster function which increases the to BI, and then back to 9. power level. I appears in the display, and the B If activated, the appliance will operate indicator also lights up.

  • Page 24: Safety Features

    Safety features Lock To deactivate the system lock ^ Turn the control anticlockwise as far The induction wok is fitted with a safety lock to prevent unauthorised use, e.g. as it will go, and hold in that position until the L goes out, and 0 appears by children.

  • Page 25: Safety Switch-Off

    Safety features Safety switch-off Power setting Maximum The induction wok is fitted with a safety operating time in switch-off feature in case you forget to hours switch it off yourself. If the induction wok is heated for an unusually long period of time (see chart), and the power setting is not altered, it will switch itself off automatically.

  • Page 26: Overheating Protection

    Safety features Overheating protection The induction coil can overheat if The induction coil is equipped with – the appliance is used for too long at overheating protection. Before the maximum power. induction coil gets too hot, overheating – the appliance is not well enough protection cuts in in one of the following ventilated.

  • Page 27: Cleaning And Care

    Cleaning and care Miele offer a range of branded cleaning To avoid damaging the surface of and conditioning products. See your appliance, do not use: "Optional accessories". – cleaning agents containing soda, alkalines, ammonia, acids or Do not use a steam cleaning chlorides, appliance to clean this appliance.

  • Page 28: Ceramic Surface

    Stubborn soiling may need Stainless steel to be removed with a shielded scraper blade. Miele's ceramic and stainless steel hob cleaning agent is suitable for cleaning Then clean the appliance with Miele stainless steel surfaces (see "Optional ceramic and stainless steel hob accessories").

  • Page 29: Problem Solving Guide

    Check whether the control is damaged – the lock is activated. or stuck. If necessary, deactivate it (see If this is not the case, call the Miele "Lock"). Service Dept. – the mains fuse has tripped. – the overheating protection mechanism has been triggered (see ...
  • Page 30 Problem solving guide ... one of the following has occurred: ... the cooling fan continues to run after the appliance has been – The booster has automatically switched off. switched off early. This is not a fault. The fan will continue –...

  • Page 31: Optional Accessories

    Optional accessories Miele offer a comprehensive range of useful accessories as well as cleaning and conditioning products for your Miele appliances. These products can be ordered online at: or from Miele (see back cover for contact details) Wok CSWP 1400...

  • Page 32: Safety Instructions For Installation

    After installation, ensure that the connection cable is without hindrance and that there is no mechanical obstruction which could damage it, such as a drawer. The appliance may only be installed above a Miele oven if the worktop is at least 40 mm thick.
  • Page 33 Safety instructions for installation Safety distance above the appliance When two or more appliances are installed together below a cooker hood, e.g. an induction hob or wok and a gas hob, which have different safety distances given in the installation instructions, you should select the greater distance of the two.
  • Page 34 40 mm CS 1212 / CS 1212-1 CS 1221 / CS 1221-1 CS 1222 CS 1223 CS 1234 / CS 1234-1 Not recommended 50 mm CS 1112 CS 1122...
  • Page 35 Safety instructions for installation Safety distances underneath the Interim shelf appliance It is not necessary to fit an interim shelf underneath the appliance, but one may To ensure sufficient ventilation to the appliance, a minimum gap must be left be fitted if you wish. between the underside of the appliance A ventilation gap of 10 mm at the back and any oven, interim shelf or drawer.
  • Page 36 Safety instructions for installation Safety distance when installing the appliance near a wall with additional niche cladding A minimum safety distance must be maintained between the worktop cut-out and any niche cladding to protect it from heat damage. If the niche cladding is made from a combustible material (e. g. wood) a minimum safety distance e of 50 mm must be maintained between the cut-out and the cladding.

  • Page 37: Appliance And Building-In Dimensions

    Appliance and building-in dimensions CS 1223 a Spring clamps b Front c Casing depth d Mains connection cable, L = 1440 mm...

  • Page 38: Preparing The Worktop

    Preparing the worktop ^ Make the worktop cut-out for one or more appliances in accordance with the building-in diagrams. Remember to maintain a minimum safety distance from the back wall, as well as from any tall unit or side wall to the right or left of the appliance.

  • Page 39: Installation Of Several Appliances

    Installation of several appliances When installing two or more appliances next to each other a spacer bar b must be used between each one. See "Fixing the spring clamps and spacer bars". Worktop cut-out Worktop cut-out - two appliances - three appliances To calculate the cut-out width (D) required: Add up the widths of each appliance (e.g.
  • Page 40 Installation of several appliances a Spring clamps b Spacer bars c Gaps between spacer bars and worktop d Cover strips The illustration shows a worktop cut-out with spring clamps a and spacer bars b for 3 appliances. An additional spacer bar is required for each additional appliance. The position for securing each additional spacer bar will depend on the width of appliance B (288 mm / 380 mm / 576 mm).

  • Page 41: Fixing The Spring Clamps And Spacer Bars

    Fixing the spring clamps and spacer bars Wooden worktops ^ Position the spring clamps supplied a and spacer bars b on the top edge of the cut-out in the positions marked. ^ Secure the spring clamps and spacer bars with the 3.5 x 25 mm screws supplied.
  • Page 42 Fixing the spring clamps and spacer bars Granite and marble worktops The screws are not required for granite or marble worktops. ^ Apply silcone to the side edges and the lower edges of spring clamps a and spacer bars b. ^ Then fill gap e between the spacer ^ Position and secure the spring bars and the worktop with silicone.

  • Page 43: Installing The Appliance(S)

    Installing the appliance(s) ^ Feed the connection cable down ^ Starting at the front, position the next through the cut-out. appliance in the worktop cut-out. ^ Starting at the front, position the ^ Connect the appliance(s) to the appliance in the worktop cut-out. mains (see "Electrical connection").

  • Page 44: General Installation Tips

    General installation tips Seal between the appliance and the Tiled worktop worktop Grout lines a and the hatched area The sealing strip under the edge of the top part of the appliance provides a underneath the surface of the sufficient seal for the worktop. appliance must be smooth and even.

  • Page 45: Electrical Connection

    H 05 V V-F be provided for all poles. (pvc insulated), available from Miele. For extra safety it is advisable to protect the appliance with a suitable residual Installation, repairs and other work current device (RCD).
  • Page 46 Electrical connection Important The electrical safety of this appliance can only be guaranteed when continuity is complete between the appliance and an effective earthing system, which complies with local and national regulations. It is most important that this basic safety requirement is present and tested regularly and if there is any doubt the electrical wiring in the home should be inspected by a...

  • Page 47: After Sales Service, Data Plate, Guarantee

    Please note that telephone calls may be monitored and recorded to improve our service. When contacting Miele, please quote the model and serial number of your appliance which are given on the data plate. N.B. A call-out charge will be applied for service visits where the problem could have been resolved as described in these instructions.
  • Page 48 Alteration rights reserved/ 4111 M.-Nr. 07 180 671 / 02...

Table of Contents