Related Manuals for Miele INDUCTION WOK CS 1223
Summary of Contents for Miele INDUCTION WOK CS 1223
- Page 1 Operating and Installation Instructions Induction Wok CS 1223 en - CA To prevent accidents and machine damage, read the Operating Manual before installation or use. M.-Nr. 07 353 930...
-
Page 2: Table Of Contents
Contents IMPORTANT SAFETY INSTRUCTIONS....... . . 3 Description of the unit ..........8 Before using for the first time. -
Page 3: Important Safety Instructions
WARNING- When using your appliance follow basic precautions, including the following: Read all instructions before installation or use to prevent injury and appliance damage. This appliance conforms to all uniform safety codes and regulations. The manufacturer cannot be held responsible for damage or injury caused by improper use of this appliance. - Page 4 Danger of burning or scalding. Technical Safety Installation, repair and maintenance work should be performed by a Miele authorized service technician. Work by unqualified persons could be dangerous and may void the warranty. Before installing the combiset, check for externally visible damage.
- Page 5 Ensure power is not supplied to the appliance until repair work is completed. Defective components should be replaced by Miele original spare parts only. Only with these parts can the manufacturer guarantee the safety of the appliance. IMPORTANT SAFETY INSTRUCTIONS Do not cook on a broken combiset.
- Page 6 IMPORTANT SAFETY INSTRUCTIONS Safety Individuals with a pacemaker or similar medical device: Please note that an electromagnetic field develops when the combiset is turned on. It is not likely that this will affect the pacemaker or similar device. If in doubt contact the manufacturer of the device or your doctor.
- Page 7 Make certain that the power cords of small appliances do not come in contact with the appliance. The insulation of the cable could become damaged. Danger of electric shock! Be careful not to drop anything on the ceramic surface of the combiset. Even lightweight objects may cause damage.
-
Page 8: Description Of The Unit
Description of the unit a Wok burner C11 " (30 cm) Rating in watts: 2400 W with Booster: 3200 W b Wok pan (included) c Control knob d Indicators Indicators f On/Off indicator g Booster indicator h "Residual Heat" indicator e Display ß... -
Page 9: Before Using For The First Time
Clean the combiset ^ Before using for the first time, clean the appliance with a damp cloth and dry with a soft cloth. Do not use liquid dish soap to clean the combiset, this may cause permanent blue discolorations. Before using for the first time Heat the appliance When the combiset is first connected to the power supply, and after a power... -
Page 10: Induction
Induction How it works An induction coil is located under the burner. When the burner is switched on, this coil creates a magnetic field which impacts directly on the base of the pan and heats it up. The burner itself is heated indirectly by the heat given off by the pan. -
Page 11: Noises
Noises The following noises can occur when the induction wok is in use. – Higher power settings may cause a buzz. This will decrease or cease altogether when the power setting is reduced. – You may hear a clicking sound from the electronic switches, especially on lower settings. -
Page 12: Use
Turning the combiset On/Off Do not leave the appliance unattended while in use. To turn the combiset on turn the control knob clockwise a to the desired power level. To turn the combiset off turn the control knob counterclockwise b to "0". The knob must only be turned clockwise to turn the burner on and counterclockwise to turn the burner... -
Page 13: Settings
Settings Use for Keeping food warm, Melting chocolate, etc. Warming food Stir-frying Auto-heat Continued Heat-up time power level When Auto-heat has been activated, the burner switches on automatically at Power the highest setting and then switches to level the continued power level which was selected. -
Page 14: Booster Function
Booster function The induction wok is equipped with a booster function to temporarily increase the power level. When the Booster is activated the burner will operate at power level 9 with an extra boost of power for 10 minutes. Taking the wok pan off the burner while the booster is in operation interrupts the booster function. -
Page 15: Safety Features
Child Safety Lock Keep children away from the combiset for their own safety. The combiset has a Child Safety Lock to prevent children from turning on the burners. To activate the Child Safety Lock: ^ Turn the control knob counterclockwise as far as it will go, and hold until L appears in the display. -
Page 16: Overheating Protection
If a drawer is installed directly under the combiset, sufficient space must be kept between the drawer and its contents and the underside of the appliance in order to ensure sufficient ventilation of the appliance. If the overheating protection feature triggers again, contact Miele Technical Service. -
Page 17: Cleaning And Care
Stubborn soiling is best removed with a shielded scraper blade. ^ Apply a ceramic cleaner (available from Miele) using a soft cloth or paper towel. ^ To remove any limescale deposits or metallic residue apply a ceramic cleanser using a soft cloth or use a shielded scraper blade if necessary. -
Page 18: Stainless Steel
Soak baked or hardened spills first to loosen them. Stainless steel surfaces can be cleaned using a non-abrasive stainless steel cleaner (available from Miele). To help prevent resoiling, a conditioner for stainless steel can also be used. Apply sparingly with even pressure. -
Page 19: Frequently Asked Questions
See "Child safety lock". See "Overheating protection". Check the main fuse. Remove the fuse or "trip" the circuit breaker. Solution Turn the burner off and place the wok on the burner. Solution If this is not the case contact Miele Technical Service. - Page 20 Frequently asked questions What if the combiset turns itself off automatically? Possible fault Either the "Safety cut-out" feature or the "Overheating protection" feature has been activated. What if one of the following errors occurs: - The booster function turns off automatically ahead of time. - C and 0 flash alternately in the display.
-
Page 21: Technical Service
Technical Service In the event of a fault which you cannot easily fix yourself, please contact the Miele Technical Service Department at the address on the back of this booklet. When contacting Technical Service please quote the serial number and model of the appliance. -
Page 23: Installation Instructions
Installation Instructions IMPORTANT: SAVE FOR THE LOCAL ELECTRICAL INSPECTOR'S USE To prevent accidents and machine damage read these instructions before installation or use. -
Page 24: Safety Instructions For Installation
However, under certain conditions it may be possible for installation in these applications. Please contact the Miele Technical Service Department with specific requirements. You must ensure the power cord for the appliance will not be subject to any mechanical strain after installation. -
Page 25: Safety Distances Above The Appliance
SAFETY INSTRUCTIONS FOR INSTALLATION Safety distances above the appliance The minimum safety distance given by the hood manufacturer must be maintained between the combiset and the hood above it. See the installation instructions of the hood for these safety measurements. If the hood manufacturers instructions are not available or if flammable objects are installed over the combiset (e.g. - Page 26 SAFETY INSTRUCTIONS FOR INSTALLATION Safety distances to the sides of the appliance The appliance should only be installed as shown in the illustrations, while maintaining the required safety distances shown. Do not install the appliance between two tall cabinets, this is a fire hazard. A distance of at least 2"...
-
Page 27: Installation
Installation Safety distance when installing the appliance near a wall with trim or a back splash A minimum distance of 2" (50 mm) between the trim or back splash and the countertop cut-out if required. This distance is only necessary if these items are made of combustible materials e.g. -
Page 28: Installation Dimensions
Installation Installation dimensions a Spring clips b Appliance front c Installation height d Power supply box with connection cable L = 78 " (2000 mm) -
Page 29: Cut Out
Cut out ^ Make the worktop cut-out for one or more appliances as applicable. Remember to maintain a minimum safety distance from the back wall, as well as from any tall unit or side wall to the right or left of the appliance(s). -
Page 30: Installation Of Multiple Appliances
Installation Installation of multiple appliances When installing more than one combiset appliance, a support bar b must be installed between the appliances. Countertop cut-out two appliances For the installation of two appliances the width of the countertop cut-out D is the sum of A and C. - Page 31 Sample calculations for a countertop cut-out for three appliances appliance width minus " (8 mm) 11" (280 mm) 11" (280 mm) 11" (280 mm) " (372 mm) " (372 mm) " (372 mm) /8" (568 mm) " (568 mm) " (568 mm) appliance width appliance width...
- Page 32 Installation 2 " 2 " " 3 / 1 6 ( 5 0 m ( 5 0 m 1 " - 1 0 m m ( 2 5 - 3 a Spring clips b Support bars c Space between support bar and countertop An additional support bar is required for each additional appliance.
-
Page 33: Attach The Spring Clips And Support Bars
Attach the spring clips and support bars Wood or solid surface countertops 1 " - 1 ( 2 5 - 3 ^ Place the supplied spring clips a and the support bars b at the marked positions as shown above, by laying them on the upper edge of the cut-out and then securing them with the... - Page 34 Installation ^ Coat the edges of the spring clips a, ^ and the space d between the strips b and the countertop with silicone (supplied).
-
Page 35: Installing The Appliance
Installing the appliance ^ Feed the power cord down through the cut-out. ^ Then place the front side of the appliance in the countertop cut-out. ^ Then with a hand on each side of the appliance press down evenly on the edges until it clicks into position. -
Page 36: Sealing
Installation Sealing The appliance must not be permanently sealed into the countertop when installed. The sealing strip under the edge of the appliance provides a sufficient seal for the countertop. If the appliance is sealed into position, the countertop or appliance could be damaged if it needs to be removed for maintenance or service. -
Page 37: Electrical Connection
CAUTION: Before installation or servicing, disconnect the power supply by either removing the fuse, shutting off the main power supply or manually "tripping" the circuit breaker. Installation work and repairs should only be performed by a qualified technician in accordance with all applicable codes and standards. -
Page 38: Help Protect Our Environment
Help protect our environment Disposal of packing materials The cardboard box and packing materials are biodegradable and recyclable. Please recycle. Ensure that any plastic wrappings, bags, etc. are disposed of safely and kept out of the reach of children. Danger of suffocation! Disposal of an old appliance Old appliances contain materials that can be recycled. - Page 40 Alteration rights reserved / 4608 M.-Nr. 07 353 930 / 00 For the most updated manual see the Miele web site.