Downloading An Image File By Using Rcp - Cisco Catalyst 3120 Software Manual

Catalyst blade switch for hp

Hide thumbs Also See for Catalyst 3120:

Table of Contents

Working with Software Images

For more information, see the documentation for your RCP server.

Downloading an Image File By Using RCP

You can download a new image file and replace or keep the current image.

Beginning in privileged EXEC mode, follow Steps 1 through 6 to download a new image from an RCP

server and overwrite the existing image. To keep the current image, go to Step 6.

configure terminal

ip rcmd remote-username username

Cisco Catalyst Blade Switch 3120 for HP Software Configuration Guide

If the switch IP address translates to Switch1.company.com, the .rhosts file for User0 on the RCP

server should contain this line:

Switch1.company.com Switch1

Working with the Cisco IOS File System, Configuration Files, and Software Images

Verify that the RCP server is properly configured by

referring to the

"Preparing to Download or Upload an Image

File By Using RCP" section on page

Log into the switch through the console port, the Ethernet

management port, or a Telnet session.

Enter global configuration mode.

This step is required only if you override the default remote

username (see Steps 4 and 5).

(Optional) Specify the remote username.

Return to privileged EXEC mode.

Table of Contents