Xfp Port Cabling Specifications - Cisco CRS-1 - Carrier Routing System Router Hardware Installation Manual
Carrier routing system sip and spa
Hide thumbs
Also See for CRS-1 - Carrier Routing System Router:
- Administration manual (436 pages) ,
- Getting started manual (289 pages) ,
- Troubleshooting manual (264 pages)
Table of Contents
Advertisement
1-Port 10-Gigabit Ethernet SPA Overview
Table 3-28
Specification
Wavelength (TX)
Cabling distance (maximum)
Operating case temperature range
Storage temperature range
TX power
Receiver sensitivity (maximum)
RX overload
Maximum receiver power damage
XFP Port Cabling Specifications
Table 3-29
Table 3-29
XFP Module
XFP-10GLR-OC192SR
XFP-10GER-OC192IR
XFP-10GZR-OC192LR
XFP-10G-MM-SR
Cisco CRS-1 Carrier Routing System SIP and SPA Hardware Installation Guide
3-42
XFP Module Specifications for 10-Gigabit Ethernet SPA
shows the port cabling specifications for an XFP module.
XFP Port Cabling Specifications
Wavelength
1310 nm
1550 nm
1550 nm
850 nm
Chapter 3
Overview: Cisco CRS-1 Shared Port Adapters
Description
10GLR SR-1: 1260 nm to 1355 nm
10GER IR-2: 1530 nm to 1565 nm
10GZR LR-2: 1530 nm to 1565 nm
10G-MM-SR: 840 nm to 860 nm
10GLR SR-1: 6.2 miles (10 km)
10GER IR-2: 24.8 miles (40 km)
10GZR LR-2: 50 miles (80 km)
10G-MM-SR: 26m, 33m, 66m, 82m, 300m
10GLR SR-1: 23 to 158 degrees F (–5 to 70 degrees C)
10GER IR-2: 23 to 158 degrees F (–5 to 70 degrees C)
10GZR LR-2: 23 to 158 degrees F (–5 to 70 degrees C)
10G-MM-SR: 32 to 158 degrees F (0 to 70 degrees C)
10GLR SR-1: –40 to 185 degrees F (–40 to 85 degrees C)
10GER IR-2: –40 to 185 degrees F (–40 to 85 degrees C)
10GZR LR-2: –40 to 185 degrees F (–40 to 85 degrees C)
10G-MM-SR: –40 to 185 degrees F (–40 to 85 degrees C)
10GLR SR-1: –8.2 to 0.5 dBm
10GER IR-2: –4.7 to 4 dBm
10GZR LR-2: 0 to 4 dBm
10G-MM-SR: 3dBm,-1.5dBm,-1dBm
10GLR SR-1: –12.6 dBm
10GER IR-2: –14.1 dBm
10GZR LR-2: –24 dBm
10G-MM-SR: -11.1dBm
10GLR SR-1: 0.5 dBm
10GER IR-2: –1.0 dBm
10GZR LR-2: –7.0 dBm
10G-MM-SR: 1.0 dBm
10GLR SR-1: +5 dBm
10GER IR-2: +5 dBm
10GZR LR-2: +5 dBm
10G-MM-SR: -1dBm
Fiber Type
SMF
SMF
SMF
MMF
OL-17439-01
Advertisement
Table of Contents
Troubleshooting
