Gbic Specifications; Cisco Half-Height Gigabit Ethernet Line Card; Cisco Oc-12 Pos Line Card; Table 1-9 Gbic Port Cabling Specifications - Cisco Universal Broadband Router uBR10012 Hardware Installation Manual
Cisco systems universal broadband router hardware installation guide
Hide thumbs
Also See for Universal Broadband Router Cisco uBR10012:
- Software configuration manual (240 pages) ,
- Hardware installation manual (98 pages) ,
- Troubleshooting manual (86 pages)
Table of Contents
Advertisement
Chapter 1
Cisco uBR10012 Universal Broadband Router Overview
GBIC Specifications
Table 1-9
Table 1-9
GBIC Port Cabling Specifications
GBIC
1000Base-SX
ESR-GBIC-SX
1000Base-LX/LH
ESR-GBIC-LH
1000Base-ZX
ESR-GBIC-ZX
1. Mode-conditioning patch cord (CAB-GELX-625 or equivalent) is required. If you use an ordinary patch cord with MMF, 1000Base-LX/LH GBICs, and
a short link distance (tens of meters), this can cause transceiver saturation, resulting in a elevated bit error rate (BER). In addition, when you use the
LX/LH GBIC with 62.5-micron diameter MMF, you must install a mode-conditioning patch cord between the GBIC and the MMF cable on both the
transmit and receive ends of the link. The mode-conditioning patch cord is required for link distances greater than 984 ft (300 m).
2. 100 km over premium single-mode fiber or dispersion shifted singe-mode fiber.
Cisco Half-Height Gigabit Ethernet Line Card
The Cisco HHGE line card contains a single Gigabit Ethernet port that provides a trunk uplink to
switches and core routers. The Cisco HHGE line card provides an IEEE 802.3z compliant Ethernet
interface that can run up to 1 Gbps in full duplex mode. The line card uses a Small Form-factor Pluggable
(SFP) Gigabit interface converter (GBIC) module that supports a variety of Gigabit Ethernet interface
types (SX LX/LH, and ZX), which you can change or upgrade at any time.
Note
Only SFP GBIC modules purchased from Cisco work with the Gigabit Ethernet line card software.
For more information, see
Line Card
Cisco OC-12 POS Line Card
The OC-12 POS card provides a trunk uplink that supports up to 622 Mbps over a standard SONET/SDH
interface using a single-mode fiber intermediate reach SC connector.
Warning
Class 1 laser product. Statement 1008.
Warning
Invisible laser radiation present. Statement 1016.
OL-18259-09
lists the GE line card GBICs and their respective cable types and lengths.
Wavelength
(nm)
Fiber Type
850
MMF
1
1300
MMF
SMF
1550
SMF
Cisco uBR10012 Universal Broadband Router Gigabit Ethernet Half-Height
Installation.
Cisco uBR10012 Universal Broadband Router Hardware Installation Guide
Core Size,
Modal Bandwidth,
microns
MHz/km
62.5
160
62.5
200
50.0
400
50.0
500
62.5
500
50.0
400
50.0
500
8 to 10
—
Not
N/A
conditional
Network Uplink Cards
Cable Distance,
feet/meters
722 ft (220 m)
902 ft (275 m)
1640 ft (500 m)
1804 ft (550 m)
1804 ft (550 m)
1804 ft (550 m)
1804 ft (550 m)
32,808 ft (10 km)
43.5 miles (70 km) to
2
62 miles (100 km)
1-31
Advertisement
Table of Contents
Troubleshooting
