Table of Contents
Advertisement
Available languages
Available languages
Playback
Playing video sources in the
background of an audio source
You can combine a video image from a video source with
sound from an audio source. For example, you can enjoy
listening to classical music while viewing beautiful
scenery from the video source on the video monitor.
Press the input selector buttons ( 3 ) to select a
video source and then an audio source.
USB
CD
MD/CD-R
TUNER
DVD
DVD
DTV/CBL
DVR
V-AUX
y
• You can also select "MULTI CH" as the audio source (see
page 34). Press 4 AMP and then press D MULTI CH IN.
• Set the "BGV" parameter in the "MULTI CH SET" menu to the
desired setting to select the default background video input
source of the MULTI CH INPUT sources (see page 63).
Displaying the input source
information
You can display the format, sampling frequency, channel,
bit rate and flag data of the current input signal.
Press 4 AMP and then K MENU.
1
The top "SET MENU" display appears in the OSD.
SET MENU
TOP MENU
. ;AUTO SETUP
;MANUAL SETUP
.A;SIGNAL INFO
[ ]/[ ]:Up/Down
[ENTER]:Enter
2
Press 7 n repeatedly to select "SIGNAL
INFO" and then press 7 ENTER.
The audio information about the input source appears
in the OSD.
3
Press 7 l / h to toggle between the audio
and video information displays.
Press K MENU again to exit from "SET
4
MENU".
36
En
Audio sources
Video sources
■ Audio information
Information
FORMAT
Signal format. When this unit cannot detect a
digital signal, it automatically switches to
analog input.
SAMPLING
The number of samples per second taken from
a continuous signal to make a discrete signal.
CHANNEL
The number of source channels in the input
signal (front/surround/LFE). For example, a
multi-channel soundtrack with 3 front
channels, 2 surround channels and LFE, is
displayed as "3/2/0.1".
BITRATE
The number of bits passing a given point per
second.
FLAG
Flag data encoded in DTS, Dolby Digital, or
PCM signals that cue this unit to automatically
switch decoders.
Note
"–––" appears when this unit cannot display the corresponding
information.
■ Video information
Information
HDMI SIGNAL
Type of the source video signals and the
video signals output at the HDMI OUT
jack of this unit.
HDMI RES.
Resolution of the HDMI signals input or
output at the HDMI IN/OUT jacks of this
unit.
HDMI ERROR
Error message for HDMI sources or
connected HDMI devices. See "HDMI
(Only when error
error and message" for details.
is detected)
Note
"–––" appears when this unit cannot display the corresponding
information.
HDMI error and message
Message
DEVICE OVER
The number of the connected HDMI
components is over the limit.
HDCP ERROR
HDCP authentication failed.
OUT OF RES.
The connected monitor is not compatible
with the resolution of the input video signal.
Descriptions
Descriptions
Cause
Hide quick links:
Advertisement
Chapters
Table of Contents
