Thank you for selecting our appliance We wish you lots of enjoyment with your new appliance and we hope that you will consider our brand again when purchasing household appliances. Please read this user manual carefully and keep it throughout the product life cycle as a reference document.
Safety information In the interest of your safety and to ensure the ried out by inexperienced persons will cause correct use, before installing and first using the injury or serious malfunctioning. Contact appliance, read this user manual carefully, in- your local Service Force Centre. Always in- cluding its hints and warnings.
Installation or if the control panel, work top or plinth area are damaged such that the inside of the ap- • Check your dishwasher for any transport pliance is freely accessible. Contact your damage. Never connect a damaged ma- local Service Force centre, in order to avoid chine.
Page 5
IMPORTANT! In this case the programme has to be cancelled: 1. Press and hold the Programme selection/ Always remember that when performing opera- Cancel button until the light of the running tions such as: programme turns off and the End of pro- •...
Page 6
Programme selection/cancel button • Starting the washing programme: 1. Press the On-Off button. 2. Press the Programme selection/cancel button once, the light of the last performed washing pro- gramme illuminates and the End of programme light flashes. 3. Press the Programme selection/cancel button as many times as necessary to illuminate the light corresponding to the desired programme.
Indicator lights End of programmeindicator light Illuminates when the washing programme has ended. It also has added functions of visual signalling as: – the setting of the water softener, – deactivation/activation of the audible signals, – intervention of an alarm due to the malfunction of the machine.
off indicating that the audible signals have 7. To activate again the audible signals, sim- been deactivated. ply follow the above operations until the End of programme indicator light illumi- 6. To memorise the operation, switch off the nates. dishwasher. Washing programmes Programme Half load...
Programme Half load Degree of soil Type of load Programme de- scription Rinse and Hold Any. 1 cold rinse (to Partial load (to be completed later in the avoid food scraps day). from sticking together). This programme does not require the use of detergent.
– Fill up the salt and rinse aid container. – Adjust the water hardness setting according to the hardness of the water in your area. – Adjust the water hardness setting to the highest level and perform 1 normal washing –...
Setting the water softener manually (see table) The water softener is factory set at position 2. Set switch to position 1 or Setting the water softener electronically (see table) The water softener is factory set at position 5. 1. Press the On/Off button. The appliance current level set.
Filling with dishwasher salt CAUTION! Use only special salt suitable for dishwashers. Unscrew the cap. Only before filling with Using the funnel provided, salt for the first time, fill pour in the salt until the the salt container with wa- container is filled with salt.
Filling with rinse aid Open the lid. Fill up with rinse aid. The Clean up any rinse aid maximum level for filling is which overflows. Close indicated by "max" the lid and press until it locks. CAUTION! Never fill the rinse aid dispenser with any other substances (e.g. dishwasher cleaning agent, liquid detergent).
Open the lid. Set the dosage level. (The Close the lid and press un- dose is factory set in po- til it locks. sition 4). Loading cutlery and dishes – Dishes and items of cutlery must not lie Sponges, household cloths and any object that inside one another, or cover each other.
Page 15
For washing in the dishwasher the following cutlery and dishes are not suitable: are of limited suitability: • Cutlery with wooden, horn, china or mother-of- • Only wash stoneware in the dishwasher if it is pearls handles. specially marked as being dishwasher-safe by the manufacturer.
Load upper basket. Light For taller items, the cup If plates are to be loaded in the upper basket: load items (plastic bowls etc.) racks can be folded up- them starting from the rear positions; tilting them must be loaded in the up- wards.
Use of detergent IMPORTANT! Observe the manufacturer’s dosing and stor- age recommendations. Only use detergents suitable for dishwashers. Open the lid. Fill in the detergent in Observe the dosing lev- compartment A. els. For programmes with pre- When using detergent Close the lid.
• Water may appear on the sides and the door CAUTION! of the dishwasher as the stainless steel will When the washing programme has finished, it eventually become cooler than the dishes. is recommended that the dishwasher is un- plugged and the water tap turned off. Care and cleaning Cleaning the filters IMPORTANT!
Cleaning the spray arms 1. Unplug the appliance and then turn off the water. NEVER try to remove the spray arms. 2. Leave the door ajar to prevent the forma- tion of any unpleasant smells. If residues of soil have clogged the holes in the spray arms, remove them with a cocktail stick.
household waste disposal service or the shop CAUTION! where you purchased the product. When a unit is no longer being used: • Pull the plug out of the socket. Packaging material • Cut off the cable and plug and dispose of The packaging materials are environmentally them.
Page 21
Fault code and malfunction Possible cause and solution The programme does not start. • The dishwasher door has not been properly closed. Close the door. • The main plug is not plugged in. Insert the mains plug. • The fuse has blown in the household fuse box. Replace the fuse.
The wash results are not satisfactory There are streaks, milky spots or a bluish coating on • Decrease rinse aid dosing. glasses and dishes Water drops have dries onto glasses and dishes • Increase rinse aid dosing. • The detergent may be the cause. Contact the de- tergent manufacturer’s consumer care line.
Capacity place settings Max. weight Noise level dB(A) Hints for test institutes Testing in accordance with EN 60704 must be aid dispenser have been filled with salt and carried out with appliance fully loaded and us- rinse aid respectively and using the test pro- ing the test programme (see "Consumption gramme (see "Consumption values").
Installation After connecting the double-walled water inlet WARNING! hose, the safety valve is next to the tap. Any electrical and/or plumbing work required to If the water inlet hose leaks, the safety valve install this appliance should be carried out by a cuts off the water supply.
Drain hose Connect drain hose to the Required height: 30 to 100 Ensure that the hoses are When connecting the sink. cm above bottom of the not kinked, crushed or en- drain hose to an under dishwasher. tangled. sink trap spigot, the entire plastic membrane (A) must be removed.
Fitting under a counter The dishwasher incorporates adjustable feet to allow the adjustment of the height. IMPORTANT! During all operations that involve accessibility to internal components the dishwasher has to Carefully follow the instructions on the enclosed be unplugged. template for building in the dishwasher and fit- Be sure that once the appliance has been in- ting the furniture panel.
Page 28
www.electrolux.com 156992660-00-05102007 Subject to change without notice...