Table of Contents
Advertisement
Managing MAC Address Tables
Configuring Static MAC Addresses
Configuring Static MAC Addresses
STEP 1
STEP 2
STEP 3
STEP 4
Managing Dynamic MAC Addresses
Cisco Small Business 200 Series Smart Switch Administration Guide
Static MAC addresses are assigned to a specific physical interface and VLAN on
the switch. If that address is detected on another interface, it is ignored, and is not
written to the address table.
To define a static address:
Click MAC Address Tables > Static Addresses. The
Static Addresses
The
Add Static Address
Click Add. The
Enter the parameters.
•
VLAN ID—Select the VLAN ID for the port.
•
MAC Address—Enter the interface MAC address.
•
Interface—Select an interface (port, or LAG) for the entry.
•
Status—Select how the entry is treated. The options are:
-
Permanent—The system never removes this MAC address. If the static
MAC address is saved in the Startup Configuration, it is retained after
rebooting.
-
Delete on reset—The static MAC address is deleted when the device is
reset.
-
Delete on timeout—The MAC address is deleted when aging occurs.
-
Secure—The MAC address is secure when the interface is in classic
locked mode (see
Click Apply. A new entry appears in the table.
The Dynamic Address Table (bridging table) contains the MAC addresses
acquired by monitoring the source addresses of frames entering the switch.
page displays the defined static addresses.
page opens.
Configuring Port
Static Addresses
Security).
14
page opens.
189
Hide quick links:
Advertisement
Table of Contents
