Table of Contents
Advertisement
Quick Links
eooa
LCD TV I PLASMA TV
OWNER'S
MANUAL
LCD TV MODELS
32LB9D
47LC7DF
PLASMA TV MODELS
60PY3D
Please read this manual carefully
before operating
your set.
Retain [t for future
reference.
Record mode[ number and serial number
of the set.
See the [abe[ attached
on the back cover and quote this
information
to your dealer when you require service.
ENERGY
STAR is a set of power-saving
guidelines
issued
by the
U.S.
Environmental
Protection
Agency(EPA).
As an ENERGY
STAR
Partner
LGE U.S.A.,
Inc. has determined
that
this
product
meets
the
ENERGY
STAR guidelines
for
energy
efficiency.
Advertisement
Table of Contents
Related Manuals for LG 47LC7D
Summary of Contents for LG 47LC7D
- Page 1 eooa LCD TV I PLASMA TV OWNER'S MANUAL PLASMA TV MODELS LCD TV MODELS 32LB9D 60PY3D 47LC7DF Please read this manual carefully before operating your set. Retain [t for future reference. Record mode[ number and serial number of the set. See the [abe[ attached on the back cover and quote this information...
-
Page 2: Warning / Caution
Do not attempt to modify this product in any way vides guidelines proper grounding and. in without written authorization from LG Electronics. particular, specifies that the cable ground shall Unauthorized modification could void the user's be connected to the grounding... -
Page 3: Safety Instructions
SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS Important safety instructions shall be provided with each apparatus. This information shall be given in a se- parate booklet or sheet, or be located before any operating instructions in an instruction for installation use and supplied with the apparatus. This information shall be given in a language acceptable to the country where the apparatus... - Page 4 Use only with the cart, stand, tripod, bracket, authorized servicer. Protect the power cord or table specified by the manufacturer, or sold from physical or mechanical abuse, such as with the apparatus. When a cart is used, use being twisted, kinked, pinched, closed in a caution when moving the cart/apparatus door, or walked upon.
-
Page 5: Table Of Contents
CONTENTS WARNING / CAUTION ......1 SAFETY INSTRUCTIONS ......2 Entry Modes ......FEATURES OF THIS TV ....Photo List ......PREPARATION Music List ......Accessories ......Front Panel Controls ...... PICTURE CONTROL Back Panel Information ....Attaching the TV to a Wall ....Picture Size (Aspect Ratio) Control .. - Page 6 TIME SETTING Clock Setting - Auto Clock Setup ....- Manual Clock Setup ....Auto On/OffTime Setting ....Sleep Time Setting ......Auto Shut-off Setting ..... ¸ _ 7 =7_Z _ 7_ =_ _ _:_ _..PARENTAL CONTROL/RATINGS Set Password & Lock System ....Channel Blocking ......
-
Page 7: Featuresof This Tv
FEATURESOF THIS TV What is a Plasma TV ? cells. A few cell defects will normally occur in the Plasma TV manufacturing process. Several tiny, Using plasma is the best way to achieve flat panel minute colored dots visible on the screen should be displays with excellent image quality and large screen acceptable. -
Page 8: Preparation
PREPARATION ACCESSORIES Ensure that the following accessories are included with your plasma display. If an accessory is missing, please contact the dealer where you purchased the product. User must use shielded signal interface cables (D-sub 15 pin cable) with ferrite cores to maintain standard compliance for the product. -
Page 9: Front Panelcontrols
FRONT PANELCONTROLS _ Here shown may be somewhat different from your TV. _ If your TV stand has a protection film, remove it attached to the stand. Then wipe the stand with polishing cloth. 60PY3D Remote Control Sensor Touch Pad Program Display Power Standby Indicator... - Page 10 47LC7DF (V,A) Buttons VOLUME (_II,I_) Buttons ENTER Button Button INPUT Button POWER Button Intelligent Eye Adjusts picture Power/Standby Indicator according to the surrounding con- • illuminates red in standby mode. Remote Control Sensor ditions. • illuminates green when the set is switched on. 32LB9D (V,A) Buttons...
-
Page 11: Back Panelinformation
BACK PANELINFORMATION _ Here shown may be somewhat different from your TV. 60PY3D Input port S-VIDEO Input Connect S-Video out from an S-VIDEO device. '/VIDEO Input Connect audio/video output from an external device to these jacks. 47LC7DF _USB Input _S-VIDEO Input Connect S-Video out from an S-... - Page 12 _ Here shown may be somewhat different from your TV. 32LB9D Input port ,/VIDEO Input Connect audio/video output from an external device to these jacks. I ANTE"N ®J-- CABLEIN AUDIO RGB(PC) (RGB/DVI) S-VIDEO VIDEO LIMO_O)-AUDIO-R ...VIDEO AUDIO -J S-VIDEO @ HDMI/DVI Connect S-Video out from an S-VIDEO device.
-
Page 13: Attaching The Tv To A Wall
ATTACHING THE TV TO A WALL We recommend that you set up the TV close to a wall so it cannot fall over if pushed backwards. Additionally, we recommend that the TV be attached to a wall so it cannot be pulled in a forward direction, potentially... -
Page 14: Stand Installation
STAND INSTALLATION (Only 3 2LB9D model) Carefully place the product screen side down on a cushioned surface that will protect product and screen from damage. ssemble the product stand with the product as shown. Install the 4 bolts securely, in the back of the product in the holes provided. -
Page 15: Back Cover For Wire Arrangement
BACK COVER FOR WIRE ARRANGEMENT _ Here shown may be somewhat different from your TV. 60PY3D Hold the CABLE MANAGEMENT with both handsand pull it as shown. 45 ° CABLE MANAGEMENT Connect the cables necessary. To connect an additional equipment, see the External equipment Connections... - Page 16 _ Here shown may be somewhat different from your TV. 47LC7DF Connect the cables as necessary. To connect an additional equipment, see the External equipment Connections section. Install the CABLE MANAGEMENT as shown. CABLE MANAGEMENT iii!"!_i'ili!i'i_i _iiili_!_Xi'iii_'ii!i!i!i'i_'ii!iiiil!iii!!_!i_i'i!!!!_i! '!!!ii!!i!i_iliJl iii_ ii_i!!i! undle the cables using the supplied twist holder.
- Page 17 _ Here shown may be somewhat different from your TV. 32LB9D Connect the cables as necessary. To connect an additional equipment, see the External equipment Connections section. nstall the CABLE MANAGEMENT as shown. (Insert it as pushing the loops on the both sides of the cable management.) CABLE MANAGEMENT undle the cables using the supplied twist...
-
Page 18: Desktop Pedestalinstallation
DESKTOP PEDESTALINSTALLATION For proper ventilation, allow a clearance of 4 in. on each side and the top, 2.36 in. on the bottom, and 4 in. from the wall. 60PY3D 47LC7DF 4 inches 4 inches 4 inches 4 inches 4 inches 32LB9D 4 inches 4 inches... -
Page 19: Not Using The Desk-Typestand
NOT USING THE DESK-TYPESTAND(o.'y 60PY3D model) _ It is applied to when installing only the 60PY3D model as wall-type. When not using the desk-type stand, install the supplied desk-type stand fixture protection rubber caps as shown at the figure. RUBBER BOLT To prevent the foreign materials... -
Page 20: Antenna Or Cable Connection
ANTENNA OR CABLE CONNECTION 1. Antenna (analog or digital) Wall Antenna Socket or Outdoor Antenna without Cable Box Connections. For optimum picture quality, adjust antenna direction if needed. Multi-family Dwellings/Apartments Wall onnect to wall socket) antenna Antenna !Antenna ....I (VHF, UHF) Single-family Dwellings/Houses / (Connect to wall jack for outdoor antenna) ICopper Wire... -
Page 21: External Equipment Setup
EXTERNAL EQUIPMENT SETUP HD RECEIVERSETUP This TV can receive Digital Over the-air/Cable signals without an external digital set-top box. However, if you do receive digital signals from a digital set-top box or other digital external device, reDr to the figure as shown below, This TV supports HDCP (High... - Page 22 When connecting D-sub 15pin cable 1. Now to connect onnect the RGB output of the digita[ set-top box to the RGB (PC) jack on the set. Connect the audio outputs of the set-top box to the AUDIO (RGB/DV[) jack on the set. 2.
- Page 23 EX""'FERNAL EQUIIII!>MEN""'F SETUP When connecting HDMI to DVI cable i_ ...... 1iii:ii::1) .._ :ifiiii:iil) 1. How to connect Connect the DVI output of the digital set-top box to the HDMI/DV[ IN1,2 or 3 lack on the set. Connect the audio output of the digital set-top box to the AUDJO(RGB/DV[) ]ack on the set. 2.
-
Page 24: Dvd Setup
DVD SETUP When connecting Component cable 1. How to connect onnect the video outputs (Y, PB, PR) of the DVD to the COMPONENT [N VIDEO1 iacks on the set, Match the iack colors (Y = green, PB = blue, and PR = red), Connect the audio outputs of the DVD to the COMPONENT... - Page 25 EXTERNAL EQUIPMENT SETUP When connecting with an S-Video cable 1. How to connect onnect the S-VIDEO output of the DVD to the S-VIDEO input on the set. Connect the audio outputs of- the DVD to the AUDIO input jacks on the set. 2.
-
Page 26: Vcr Setup
VCR SETUP To avoid picture noise (interference), leave an adequate distance between the VCR and TV Use the [SM Dature in the Option menu to avoid having a fixed image remain on the screen for a long pe riod of timeo If the 4:3 picture format is used;... - Page 27 EX""'FERNAL EQUIIII!>MEN""'F SETUP When connecting with a RCA cable 1. How to connect Connect the AUDJO/V[DEO]acks between TV and VCR. Match the lack colors(Video = yellow, Audio Left = whffe,and Audio Right = red) 2. How to use m Insert a video tape into the VCR and press PLAY on the VCR.
-
Page 28: Other A/V Source Setup
OTHER A/V SOURCE SETUP 32LB9D 60PY3D, 47LC7DF =,i' s.vD_o -..4 -..4 Video Game Set Video Game Set 1. Now to connect Connect the AUD[O/V[DEOiacks between TV and external equipment. Match the iack colors. (Video = yellow, Audio Left = whffe, and Audio Right = red) 2. -
Page 29: Pc Setup
EX""'FERNAL EQUIIII!>MEN""'F SETUP PC SETUP This TV provides PJug and Hay capability, meaning that the PC adjusts automatkaJJy to the TV's settings. When connecting D-sub 15 pin cable 1. How to connect >. Connect the RGB output of the PC to the RGB roll (PC) iack on the set, Connect the PC audio output... - Page 30 When connecting HDMI to DVI cable 1. How to connect Connect the DV[ of the PC to the HDMI/DV[ 3 iack the set. output (Use the HDM[ to DV[ cable) jack Connect the PC audio to the AUD[O(RGB/DV the set. output 2.
- Page 31 EXFERNAk EQUIIIP M ENIIIF SEIlli UIIh,, ,,,,,,, i,,,,,,, @ NOTES Depending on the graphics card. DOS mode may Avoid keeping a fixed image on the screen for a not work ira HDM[ to DVJ Cable is in use. long period of time. The fixed image may become permanemIy imprinted on the screen.
- Page 32 Supported Display Specifications (HDMbDTV) Supported Display Specifications (RGBiHDMbPC) 31.468 70.09 31.47 60.00 720x480 i_i_i_i_i_i_i_i_i_i_i_i_!_!_!_!_!_!_!_!_!_!_!_!!JJ_!_!!_!!_!_!i_i!_!!i:_!_!_!_i!ii_!i_i_!_!i_!i_!i_!i_!i_!i_!i_!i_!i_!_!_i_ii_i!_i!_i!_i!i!_!!i!i_iiii!_!_!_!_{ ..................31.47 59.94 31.469 70.08 1280x720 45.00 60.00 44.96 59.94 31.469 59.94 3Z861 72.80 3Z500 75.00 33.75 60.00 > 33.72 59.94 £3 67.50 60.00 35.156 56.25 3Z879 60.31 6Z432...
- Page 33 EX""'FERNAL EQUIIII!>MEN""'F SET'UP Screen Setup for PC mode Overview When the RGB input, of the set is connected to a PC Output, Sdect RGB-PC with using the INPUT button on the remote controk When you change the resoUution, sdect the proper resoUution in present input to see the best picture appearance.
- Page 34 Adiustment for screen Resdution, Position, Size, Phase, Reset Use • or • button to select Resolution, Position, Size, or Phase. Press the ENTER button and then use • / • or _11 / I_ button to make appropriate adiustments, The Phase adiustment range is -16 ~ +16. The Size adiustment range is -50 ~ +50.
-
Page 35: Usb In Setup
EX""'FERNAL EQUIIIPMEN""'F SET'UP USB IN SETUP The TV has a speda[ signa[ output capability which aJJows you to hook up the second TV or monitor, 32LB9D 60PY3D, 47LC7DF 1. Now to connect Connect the USB device to the USB [N lacks on the side of TV, 2. -
Page 36: Audio Out Setup
AUDIO OUT SETUP Send the TV's audio to external audio equipment via the Audio Output port. 1. How to connect Analog r.tl outputs Connect audio to the TV's AUDIO OUT lacks r't3 Set the 'TV Speaker option - Off" in the AUDIO menu. L, _ (_, p.74). -
Page 37: Watching "I'v / Channel Control
WATCHING TV/CHANNEL CONTROL REMOTE CONTROL FUNCTIONS When using the remote control aim it at the remote control sensor on the TV. MEDIAHOST mode control ® Controls the MEDfAHos_ mode. buttons VCR/DVD Control video cassette recorders or DVD players. buttons Displays the main menu. MENU Adiust brightness... - Page 38 POWER Turns your TV or any other programmed equipment on or off, depending on the mode. TV INPUT in AV 1-2, Component 1-2, RGB-PC,HDM[1, HDM[2 and HDMI5 input sources, screen returns to the last TV channel. INPUT External input modes rotate in regular sequence: Antenna, CaNe, AV1-2, Component 1-2, RGB-PC, HDMil,...
-
Page 39: Turning On Tv
WATCHING "IV/CHANNEL CONTROL TURNING ON TV First, connect power cord correctly. At this moment, the TV switches to standby mode. [n standby mode, press the rl_/I (or ON/OFF), INPUT, CH (A or T) button on the TV or press the POWEI_ >... -
Page 40: Channel Selection
CHANNEL SELECTION Press the CH • or • or NUMBER buttons to select a channel number. -
Page 41: Volume Adjustment
WATCHING°TV/CHANNELCONTROL VOLUME ADJUSTMENT Adjust volume to suit your persona[ preference. Press the VOL • or • button to adjust the volume. Hfyou want to switch the sound off, press the MUTEbub ton. > You can cancel the Mute function by pressing the MUTEor VOL •... -
Page 42: On-Screen Menus Selection
ON-SCREEN MENUS SELECTION Your TV's OSD (On Screen Display) may differ slightly from what is shown in this manual Press the MENU button and then use • or • button to select each menu, Press the I_ button and then use • •... -
Page 43: Channel Setup
WATCHING "IV/CHANNEL CONTROL CHANNEL SETUP Auto Scan(Auto Tuning) Automatically finds all channels available through antenna or cable inputs, and stores them in memory on the channel list. Run Auto Tuning again after any Antenna/Cable connection changes. A password is required to gain access to Auto Tuning menu if the Lock System [s turned Press the MENU button and then use •... -
Page 44: Add/Delete Channel(Manual Tuning)
Add/Delete Channel(Manual Tuning) A password is required to gain access to Manual Tuning menu if the Lock System is turned If selecting DTV or CADTV input signal you can view the on screen signal strength monitor to see the quality the signal being received, Press the MENU button and then use •... -
Page 45: Channel Editing
WATCHING "IV/CHANNEL CONTROL Channel Editing From the defauJt channeJ [ist created from the Auto Tuning channeJ search, you can create two different types of channeJ [ists in memory: "custom [ist" and "favorite channeJ [ist". A custom [ist can be created by toggJing each channeJ on or off... -
Page 46: Input List
INPUT LIST Press thelNPUT button to display external device that is connected to the unit, on screen, Press the ENTER button to change the input to the active external device, Use the • or • button to select the input source, [f all external input sources are connected: [Antenna Cable... -
Page 47: Simplink
%ATCHINGTV/CHANNEL CONTROL iml-JLlnK This operates only for the devices with the (@mPLInK logo. Please check the logo. (@mPLInK ..,-t _ ?;;;..This allows you to control and play other AV devices connected to the &splay through HDM[ cable wffhout addff[ona[ cables and settings. - Page 48 SimpLink Functions Direct Play After connecting AV devices to TV, you can directly control the devices and play media without addffiona[ settings. Se[ect AV device Enables you to select one of AV devices connected to TV and play it. Disc playback Control connected...
-
Page 49: Input Label
%ATCHINGTV/CHANNEL CONTROL INPUT LABEL Sets a label to each input source which is not in use when you press INPUT button. Press the MENU button and then use • or • but- ton to select the OPTION menu. > Press the I_ button and then use • or •... -
Page 50: Entry Modes
MEDIAHosT ENTRY MODES [M_'_c/ia Host Menu] When you connect a USB device or press the (_f) button, this screen is displayed, automatically. in USB device, you can not add a new folder or delete the existing fo[dero Press the • or •... -
Page 51: Photo List
PHOTO LIST It's available to playback the photo fHe(*ojpg ) in the USB device. The On Screen Display may be different from your set. Images are an example to assist with the TV operation. Screen Components @Usab[e USB memory @ Current page/Total pages @ Total number of marked thumbnail... - Page 52 Photo Selection and PopUp Menu As shown, up to 15 thumbnail photos are listed per page° Use the CH • or • button to navigate in the thumbnail photo page, Use the MARK button to mark or unmark a photo, When one or more photos are marked, you can view indMduaU photos or a sNde show of the marked photos, Hfno photos...
- Page 53 Set up the menu in Full-Sized Screen You can change the settings to display photos stored on a USB device, on a fuji-sized screen. Detailed operations are available on fuji sized photo view screen. Use the CH • or • button to navigate the thumbnail photo page.
- Page 54 _' OpLion : Set values for Slide Speed and Music folder. Use 411or I_button to select Option press ENTER button. Use _1 or I_ button and ENTER button to set vaF ues. Then go to and press ENTER to save the settings.
-
Page 55: Music List
MUSIC LIST Purchased music fHes(*.MP3) may contain copyright restrictions. Playback of these flies may not be supported by this model. Music file on your USB device can be played by this unit. The On Screen Display may be different from your set. Images are an example to assist with the TV operation. - Page 56 Music Selection and PopUp Menu As shown , up to 8 music titles are listed per page. Use the CH • or • button to navigate [n the music rifles page. Use MARK button to mark or unmark a music. When one or more music flies are marked, the marked musics will be played [n sequence.
-
Page 57: Picture Control
PICTURE CONTROL PICTURE SIZE (ASPECT RATIO)CONTROL This feature lets you choose the way an analog picture with a 4:3 aspect ratio is dis played on your TV. When you receive an analog picture with a 4:3 aspect ratio on your 16:9 TV, you need to specify how the picture is to be displayed. - Page 58 Zoom Choose Zoom 1 when you want to view the picture without any alteration. However, the top and bottom portions of the picture will be cropped. Zoom Choose Zoom 2 when you want the picture to be altered, both vertically extended and cropped.
-
Page 59: Presetpicture Settings
P CTURE CONTROL PRESETPICTURE SETTINGS Picture Mode -Preset Picture Mode adjusts the TV for the best picture appearance. Select the preset value in the Picture Mode menu based on the program category. TU_E 80U.E CD CD CD Intelligent Eye (Only LCDTV models), Dynamic Standard, Mild JSB_EC... -
Page 60: Color Tone -Preset
Color Tone -Preset Choose one of three automatic color adjustments. Set to warm to enhance hotter colors such as red, or set to cool to see less intense colors with more blue. When selecting Picture Mode options (Dynamic, Standard Mild), Color Temperature is automatically change. -
Page 61: Manualpictureadjustment
P CTUR£ CONTROL MANUAL PICTURE ADJUSTMENT Picture Mode -User Mode Adjust the picture appearance to suit your preference viewing situations. Press the MENU button and then use • or • button to select the PICTURE menu. Press the I_ button and then use • or •... -
Page 62: Color Tone -User Mode
Color Tone -User Mode You can also adjust the detailed settings(Red, Green, Blue) by selecting the User menu. This feature operate only if the picture mode set User ] or User 2. Press the MENU button and then use • or • button to select the PICTURE menu. -
Page 63: Xd - Pictureimprovement T Echnology
PICTURE CONTROL XD - PICTURE IMPROVEMENT TECHNOLOGY XD is LG Electronics unique picture improving technology to display a real HD source through an digital signal processing algorithm. When selecting Picture Mode options (Dynamic, Standard and Mild), XD is automatically change to Auto. -
Page 64: Advanced -Cinema 3:2 Pulldown Mode
ADVANCED -CINEMA 3:2 PULLDOWN MODE Set up the TV for the best picture appearance for viewing movies. This feature is disable only in RGB-PC, HDMI1, HDMI2, HDMI3 or Component1,2(except 480i) mode. When you operate Cinema (3:2 Pull-Down Mode or Cinema Correction Mode), the TV will adjust... -
Page 65: Advanced-Black(Darkness) Level
PICTURE CONTROL ADVANCED-BLACK(DARKNESS) LEVEL Adjusting the contrast and the brightness of the screen using the black level of the screen. This feature only in HDMI1, HDMI2, HDMI3 or operates AV1, AV2 mode. Press the MENU button and then use • or •... -
Page 66: Picture Reset
PICTURE RESET Use to quickly reset all the Picture menu options to their origi- nal factory preset values. Press the MENU button and then use • or • button to select the PICTURE menu. Press the I_ button and then use • or • button to select Picture Reset Press the I_ button to reset the Picture menu options... -
Page 67: Imagestickingminimization(Ism) Method
PICTURE CONTROL IMAGE STICKING MINIMIZATION(ISM)METHOD (Only Plasma TV model) A frozen still picture from a PC/video game displayed on the screen for prolonged periods will result in a ghost image. Use our unique method to minimize any fixed image on the screen. ress the MENU button and then use •... -
Page 68: Low-Power Picture Mode
LOW-POWER PICTURE MODE (Only Plasma TV model) Low power reduces the plasma display power consumption. Press the MENU button and then use • or • button to select the OPTION menu. Press the I_ button and then use • or • button to select Low power. -
Page 69: Sound & Language Control
SOUND & LANGUAGE CONTROL AUTO VOLUME LEVELER(AUTOVOLUME ) Scans changes in sound levels during commercials, then adjusts sound to match specified audio level. Auto Volume makes sure that volume level remains consistent whether are watching a commercial or a regular TV pro- gram. -
Page 70: Presetsound Settings (Sound Mode)
PRESETSOUND SETTINGS (Sound Mode) Sound Mode lets you enjoy the best sound without any special adjustment because the TV sets the appropriate sound options UB_CJE_ based on the program content. Standard, Music, Movie, Sports and User are preset for good sound quality at the factory and are not adjustable. -
Page 71: Sound Setting Adjustment-Usermode
SOUND & LANGUAGE CONTROL SOUND SETTING ADJUSTMENT-USERMODE Adjust the sound to suit your taste and room situations. Press the MENU button and then use • or • button to select the AUDIO menu. Press the I_ button and then use • or •... - Page 72 Press the I_ button and then use @ or [_ button to make appropriate adjustments. * Selecting Front Surround Press the I_ button and then use @ or @ button select Off, 3D EchoSound System or SRS (Sound Retrieval System)TruSurround Press EXIT button to return to TV viewing or press MENU button to return to the previous menu.
-
Page 73: Balance
SOUND & LANGUAGE CONTROL BALANCE Adjust the left/right sound of speaker to suit your taste and room situations. Press the MENU button and then use • or • button to select the AUDIO menu. Press the I_ button and then use • or •... -
Page 74: Stereo/Sap Broadcast Setup
STEREO/SAP BROADCAST SETUP This TV can receive MTS stereo programs and any SAP (Secondary Audio Program) that accompanies the stereo pro- P_TU_E a_U_D gram if the station transmits an additional sound signal as well C:)Ci as the original one and when you select Stereo or SAP on the remote control. -
Page 75: Tv Speakerson/Off Setup
SOUND & LANGUAGE CONTROL TV SPEAKERSON/OFF SETUP Turn the TV speakers off if using external audio equipment. Feature turns the TV Speakers option On or Off. Press the MENU button and then use • or • button to select the AUDIO menu. -
Page 76: Audio Language
AUDIO LANGUAGE Other languages may be available if a digital signal is provided by the broadcasting station. This feature operate only in DTV/CADTV mode. Press the MENU button and then use • or • button to select the OPTION menu. Press the I_ button and then use •... -
Page 77: On-Screen Menus Language Selection
SOUND & LANGUAGE CONTROL ON-SCREEN MENUS LANGUAGE SELECTION menus can be shown on the screen in the selected language. First select your language. Press the MENU button and then use • or • but- ton to select the OPTION menu. Press the I_ button and then use •... -
Page 78: Caption Mode
CAPTION MODE Caption must be provided to help people with hearing loss watch TV. Press the MENU button and then use • or • but- ton to select the OPTION menu. Press the I_ button and then use • or • button to select Caption. - Page 79 SOUND & LANGUAGE CONTROL _ Using the MENU button This function is only available when Caption Mode is set On. Press the MENU button and then use • or • but- ton to select the OPTION menu. Press the I_ button and then use •...
-
Page 80: Digital Broadcasting System Captions
Digital Broadcasting System Captions Choose the language you want the DTV/CADTV Captions to appear in. This function is only available when Caption Mode is set On. Press the MENU button and then use • or • but- ton to select the OPTION menu. -
Page 81: Caption Option
SOUND &LANGUAGE CONTROL Caption Option DTV/CADTV Customize captions that appear on your screen. This function is only available when Caption Mode is set On. Press the MENU button and then use • or • but- ton to select the OPTION menu. -
Page 82: Clock Setting
TIME SETTING CLOCK SETTING Auto Clock Setup The time is set automatically from a digital channel signal. The digital channel signal includes information for the current time provided by the broadcasting station. Set the clock manually if the current time is set incorrectly the auto clock function. -
Page 83: Manual Clock Setup
TIME SETTING Manual Clock Setup If the current time setting is wrong, reset the clock manually. ress the MENU button and then use • or • button to select the TIME menu. Press the I_ button and then use • or •... -
Page 84: Auto On/Offtime Setting
AUTO ON/OFF TIME SETTING The timer function operates only if the current time has been set. The Off-Time function overrides the On-Time function if they are both set to the same time. The TV must be in standby mode for the On-Time to work. -
Page 85: Sleeptime Setting
TIME SETTING SLEEPTIME SETTING The Sleep Time turns the TV off at the preset time. Note that this setting is cleared when the TV is turned off. You can also set up the Sleep Time in the TIME menu. Press the TIMER button repeatedly to select the number of minutes. -
Page 86: Auto Shut-Off Setting
AUTO SHUT-OFF SETTING TV will be automatically turned off, in case of no signal inTV & input source or no remote control input for 10 minutes. ress the MENU button and then use • or • button to select the TIME menu. Press the I_ button and then use •... -
Page 87: Parental Control/Ratings
PARENTALCONTROL / RATINGS Parental Control can be used to block specific channels, ratings and other viewing sources. The Parental Control Function (V-Chip) is used to block program viewing based on the ratings sent by the broadcasting station. The default setting is to allow all programs to be viewed. Viewing can be blocked by choosing the type of the program and the categories. - Page 88 Set Password For USA For Canada Change the password by inputting a new password twice. After inputting the password, use the • or • button to choose Set password. ress the I_ button and then choose any 4 digits for your new password and enter the them on the new.
-
Page 89: Channel Blocking
PARENTALCONTROL/ TIIINGS CHANNEL BLOCKING Blocks any channels that you do not want to watch or that you do not want your children to watch. For USA For Canada fter inputting the password, use the • or • button to choose Block Channel. Press the I_ button. -
Page 90: Movie & Tv Rating
MOVIE & TV RATING Movie Rating (MPAA) -for USA only Blocks movies according to the movie ratings limits speci- fied, so children cannot view certain movies. You can set the ratings limit by blocking out all the movies with the ratings above a specified level. - Page 91 PARENTALCONTROL/ TIIINGS TV Rating Children -for USA only Prevents children from watching certain children's programs, according to the ratings limit set. The children rating does not apply to other TV programs. Unless you block certain TV programs intended for mature audiences in the TV Rating - sub menu, your children...
- Page 92 TV Rating english - for CANADA only Selecting canadian english language rating system. After inputting the password, use the • or • button to choose TV Rating-English. Press the I_ button and then use the • or • button to select E, C, C8+, G, PG, 1 4+, 1 8+, or Blocking Off.
-
Page 93: External Input Blocking
PARENTALCONTROL/ TIIINGS EXTERNAL INPUT BLOCKING For USA For Canada Enables you to select a source to block from the external source devices you have hooked up. After inputting the password, use the • or • button to choose Input Block Press thel_ button and then use the... -
Page 94: Append
APPENDIX TROUBLESHOOTING Check to see if there is any object between the product and the remote control causing obstruction. Ensure you are pointing the remote control directly at the TV. _ Ensure that the batteries are installed with correct polarity (+ to +, - to -). - Page 95 y_Press the VOL or VOLUME button. Sound muted? Press MUTE button. Pictu re OK & No sound Try another channel. The problem may be with the broadcast. Are the audio cables installed properly? _ Adjust Balance in menu option. _ A change in ambient humidity or temperature may result in an unusual noise when the product...
-
Page 96: Maintenance
MAINTENANCE Early malfunctions can be prevented. Careful and regular cleaning can extend amount of time enjoy your Caution: Be sure to turn power off and unplug power cord before begin any cleaning. Cleaning the Screen Here's a great way to keep the dust offyour screen for a while. -
Page 97: Product Specifications
PRODUCT SPECIFICATIONS Width x Height x Depth (inches/mm) Weight (pounds / kg) Without Stand 2Z5 pounds / 12.4 kg 45.1 x32.5x12.0 inches Width x Height x Depth With Stand 1144.5x825.6x306.0 (inches/mm) ........................... 45.1 x29.7x4.1 inches Without Stand 1144.5x754.5x103.0 Weight (pounds / kg) With Stand 82.4 pounds / 3Z5 kg Without... -
Page 98: Programming The Remote Control
PROGRAMMING THE REMOTE CONTROL The provided universal remote control can be programmed to operate most remote-controllable devices. Note that the remote may not control all models of other brands. Programming a code into a remote mode To find out whether your remote control can operate each device without programming, turn on the device... - Page 99 TEKNIKA HITACH PI_OT THOMAS INSTANTREPLAY _IONEER TOSHIBA 03;3 PORTLAND JCPENNY _ULSAR QUARTZ TOTEVlSION QUASAR UNITECH IENSEN VECTOR RESEARCH 012 0.50 0.55 VICTOR VIDEO CONCEPTS KENWOOD VlDEOSONIC :_EALISTC WARDS 03;4 LG (GOLDSTAR) LLOYD _,ICO YAMAHA RUNCO ZENITH 04_- 056 SALORA MAGIN...
- Page 100 Cable Box REMBRANT LG(GOLDSTAR) SAMSUNG AJIN M:NET SCIENTIFICATLANTA 003 ANTRONIK MACOM ARCHER MAGNAVOX SHERITECH CABLE STAR MEMOREX SIGNAL CENTURION MOVIE TIME SIGNATURE CENTURY SLMARX CITIZEN SPRUCER COLOURVOICE STARCOM COMBANO PANASONIC STARGATE COMTRONICS PARAGON TADIRAN DIAMOND TAEKWANG EAGLE PHILIPS TAIHAN EASTERN...
- Page 101 ANAM LOTTE SANSUI SANYO BURMECTER SCOTT CARVER SHARP CLARION DAEWOO DENON MAGNAVOX SHERWOOD SON'Y FANTASIA MARANTZ FINEARTS FISHER TAEKWANG LG(GOLDSTAR) MCINTOSH MEMOREX HAITAI ONKYO HARMANiKARDON TEAC OPTIMUS TECHNICS KOHEL PANASONIC TOSHIBA KENWOOD PENNEY VlCTO:_ PHILIPS WARDS PIONEER INKEL D37 058...
-
Page 102: Ir Codes
IR CODES 1. How to Connect _ Connect your wired remote control to the Remote Control port on the TV. 2. Remote Control IR Codes _ Output waveform Single pulse, modulated with 3Z917KHz signal at 455KHz Carrier frequency FCAR = 1/TC = fOSC/12 Duty ratio = T1/TC = 1/3... - Page 103 TV INPUT R C Button COMPONENT1 Discrete IR Code NPUT R C Button IComponentl Input Selection) POWER COM DONENT2 Discrete IR Code R/C Button (Power On/Off) RATIO C Button (Component2 Input Selection') TIMER C Button RGB-PC Discrete IR Code C Button RGB-PC InouI Selection) 10-19 Number Key 0-9...
-
Page 104: Externalcontrol Through Rs-232C
EXTERNALCONTROL THROUGH RS-232C Connect the RS-232C (serial port) input jack to an external control device (such as a computer or an A/V control system) to control the product's functions externally. Connect the serial port of the control device to the RS-232C jack on the product back panel. Note: RS-232C connection cables are not supplied with the product. - Page 105 RS-232C Configurations 2 _, 2 _- 3 ÷ 5 _- 5 _- _- 5 ± 7 ÷ D-Sub 9 D-Sub 9 D-Sub 9 D-Sub 9 Set ID Use this function to specify a TV ID number. Refer to _Real Data Mapping 1 '.
- Page 106 Command Reference List 0 - 1 12, OSD Select 0 ~ l 01. Power 0 ~ 9 13. Remote Control/ 02. In put Select Key Lock 03. Aspect Ratio 14. Treble 0 - 64 04. Screen Mute 15, Bass 0 - 64 05, Volume Mute 16.
- Page 107 Transmission / Receiving Protocol l[Command2][ l[Commandl]lCommand2][ ][Set ID][ ][Data][Cr] l[SetlD]l ] [OK] [Data] [x] [Command I ] : First command to control the seI.Ll, k, m orx) The TV transmits ACK [acknowledgement) based on this [Command 2] : Second command to control the set. forma_ when recewing normal data.
- Page 108 01. Power (Command2:a) Volume Mute (Command2:e) To control Power On/Off of the TV. To control volume mute on/off. Transmission [k][a][ ][SetlD][ ][Data][Cr You can also adjust mute using the MUTE button on remote control, Data O : Power Off Data 1 : Power On Transmission [k] [e][ ][set ID][...
- Page 109 *Refer to 'Real data mapping 1 ' See page IOZ 09. Color (Command2:i) To adjust the screen color. Acknowledgemeni [r] [ ][set ID] [ ][OKiNG] [Data][x] You can also adjust color in the Picture menu, Transmlsslon]k] [i] ] ][Set ID] ] ]]Data] [Cr] Bass (Command2:s) Data Min : 0 - Max : 64...
- Page 110 ATSC air:01-45 20. Blue adjustment(Command:S) ATSC cable:01-87 To adjust Hue in color temperature. Transrnissign[k][$][ ] [set ID] [] [Data] [Cr] Data1 ,Data2: Major Channel Number (two part) / Data MimO - Max:C8 Channel Number (One part) _Refer to "Real data mapping 2". See page 108. Data1 : High byte Acknowledgement IS] [] [Set ID][] JOKING] [Data] IX]]...
- Page 111 Data5: Main NTSC Air No Use NTSC Cable ATSC Air ATSC Cable_std ATSC Cable_hrc ATSC Cable_irc ATSC cable_auto Reserved Reserved All data are transmitted by Hexadecimal code Channel Add/Del (Command: m b) Two/One part Channel: 6th bit To add and delete the channels This bit is used in a cable-ready system.