Page 1
ENERGY STAR is a set of power-saving guidelines issued by the U.S. Environmental Protection Agency(EPA). As an ENERGY STAR Partner LGE U. S. A.,Inc. has determined that this product meets the ENERGY STAR guidelines for energy efficiency. www.lgusa.com / www.lg.ca...
Page 2
16:9 aspect-ratio screens, and AC3 digital audio. A subset of digital LG TV with this logo can play MP3 music from a MP3 television, HDTV formats include 1080i and 720p res- player, such as iPOD, and JPEG images from a digital olutions.
This reminder is provided to call the CATV system Do not attempt to modify this product in any way installer’s attention to Article 820-40 of the National without written authorization from LG Electronics. Electric Code (U.S.A.). The code provides guidelines for Unauthorized modification could void the user’s...
SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS Important safety instructions shall be provided with each apparatus. This information shall be given in a separate booklet or sheet, or be located before any operating instructions in an instruction for installation for use and supplied with the apparatus.
Page 5
Use only with the cart, stand, tripod, bracket, of the appliance, and have the cord replaced or table specified by the manufacturer, or sold with an exact replacement part by an authorized with the apparatus. When a cart is used, use servicer.
FEATURE OF THIS TV What is a Plasma TV? cells. A few cell defects will normally occur in the Plasma TV manufacturing process. Several tiny, minute Using plasma is the best way to achieve flat panel colored dots visible on the screen should be acceptable. displays with excellent image quality and large screen This also occurs in other Plasma TV manufacturers' sizes that are easily viewable.
Page 9
D-sub 15 pin Cable F F o o r r L L C C D D T T V V m m o o d d e e l l s s For 37LB5D Cable Management 2- TV Bracket Bolts...
PREPARATION FRONT PANEL INFORMATION Here shown may be somewhat different from your TV. NOTE: If your product has a protection tape attached, remove the tape. And then wipe the product with a cloth (If a polishing cloth is included with your product, use it). Plasma TV Model 50/60PY3D Remote Control Sensor...
Page 11
LCD TV Model 37/42/47/52LB5D CHANNEL ( )Buttons VOLUME ( )Buttons ENTER Button ENTER MENU Button MENU INPUT Button INPUT POWER Button 47LC7DF Intelligent Eye Adjusts picture according to the surrounding conditions. Remote Control Sensor Power/Standby Indicator Illuminates red in standby mode. Illuminates green when the set is switched on.
PREPARATION BACK PANEL INFORMATION Here shown may be somewhat different from your TV. Plasma TV Model AV IN 2 S-VIDEO ANTENNA/ CABLE IN RGB IN DIGITAL AUDIO OUT AUDIO HDMI/DVI IN REMOTE RGB(PC) CONTROL IN OPTICAL COAXIAL (RGB/DVI) RS-232C IN COMPONENT IN (CONTROL &...
Page 13
HDMI/DVI IN USB INPUT Connect a HDMI signal to 1, 2 or 3. Power Cord Socket Or DVI (VIDEO) signal to the 1, 2 or 3 port with a For operation with AC power. DVI to HDMI cable. Caution: Never attempt to operate the TV on DC COMPONENT IN power.
Page 14
PREPARATION STAND INSTALLATION (Only 37LB5D) Carefully place the product screen side down on a cushioned surface that will protect product and screen from damage. Assemble the product stand with the product as shown. Securely install the 4 bolts provided.
Page 15
NOT USING THE DESK-TYPE STAND (For Plasma TV) It is applied to when installing only the 60PY3D model as wall-type. When not using the desk-type stand, install the sup- plied desk-type stand fixture protection rubber caps as shown at the figure. RUBBER It is applied to when installing only the 50/60PY3D...
PREPARATION BACK COVER FOR WIRE ARRANGEMENT Here shown may be somewhat different from your TV. Plasma TV Model Hold the CABLE MANAGEMENT with both hands and pull it backward as shown. 45° CABLE MANAGEMENT Connect the cables as necessary. To connect an additional equipment, see the EXTERNAL EQUIPMENT SETUP section. Install the CABLE MANAGEMENT as shown.
LCD TV Model Connect the cables as necessary. To connect an additional equipment, see the EXTERNAL EQUIPMENT SETUP section. Install the CABLE MANAGEMENT as shown. CABLE MANAGEMENT NOTE Do not hold the CABLE MANAGEMENT when moving the product. - If the product is dropped, you may be injured or the product may be broken.
PREPARATION ATTACHING THE TV TO A WALL Here shown may be somewhat different from your TV. We recommend that you set up the TV close to a wall so it cannot fall over if pushed backwards. Additionally, we recommend that the TV be attached to a wall so it cannot be pulled in a forward direction, potentially causing injury or damaging the product.
DESKTOP PEDESTAL INSTALLATION For proper ventilation, allow a clearance of 4inches on all four sides from the wall. Plasma TV Model LCD TV Model 4 inches 4 inches 4 inches 4 inches 4 inches 4 inches 4 inches 4 inches CAUTION Ensure adequate ventilation by following the clearance recommendations.
PREPARATION ANTENNA OR CABLE CONNECTION Here shown may be somewhat different from your TV. 1. Antenna (Analog or Digital) AV IN 2 Wall Antenna Socket or Outdoor Antenna without a Cable Box S-VIDEO Connections. For optimum picture quality, adjust antenna direction if needed. Multi-family Dwellings/Apartments Wall (Connect to wall antenna socket)
EXTERNAL EQUIPMENT SETUP To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment. This part of EXTERNAL EQUIPMENT SETUP mainly use picture for LCD TV model. HD RECEIVER SETUP This TV can receive Digital Over-the-air/Cable signals without an external digital set-top box. However, if you do receive digital signals from a digital set-top box or other digital external device, refer to the figure as shown below.
When connecting HDMI cable 1. How to connect RGB IN Connect the digital set-top box to H H D D M M I I / / D D V V I I I I N N 1 1 , HDMI/DVI IN AUDIO RGB(PC) (RGB/DV...