Foot Switch Operating Method - Brother BAS-300G-484/484SF Instruction Manual
Instruction manual - english
Hide thumbs
Also See for BAS-300G-484/484SF:
- Manual de instrucciones (88 pages) ,
- Parts manual (80 pages) ,
- Instruction manual (42 pages)
Table of Contents
Advertisement
4. PREPARATION BEFORE SEWING
<Threading mode>
Threading mode is safe because the sewing machine will not start even when the foot switch is depressed.
1
2
All indicators switch off
THREAD/CLAMP indicator illuminates
3
Threading the thread.
• When 5 minutes have passed, the buzzer will sound and the tension discs will close.
4
Ending threading mode
THREAD/CLAMP indicator switches off
*: The intermittent presser foot is only applicable to -484 SF specifications.
4-3. Foot switch operating method
Work clamp
switch (2-step)
Start switch
21
MENU indicator switches off
4923Q
BAS-300G-484, BAS-300G-484 SF
Turn on the power switch.
Press the THREAD/CLAMP key.
• The work clamp (and the intermittent presser foot*) will
be lowered.
• The tension discs will open.
Press the THREAD/CLAMP key.
• The work clamp (and the intermittent presser foot*) will
return to where they were before threading mode began.
When the work clamp switch (left side) is depressed, the
work clamp will be lowered, and when the start switch (right
side) is depressed, the sewing machine will start.
* The work clamp lowering method can be changed using
memory switch No. 002. (Refer to "6-3. List of memory
switch settings".)
4421Q
4427Q
- Quick Links:
- Table of Error Codes
- Troubleshooting
Hide quick links:
Advertisement
Table of Contents
