Cisco ASR1001 Hardware Installation Manual page 32

Aironet 1000 series

Hide thumbs Also See for ASR1001:

Table of Contents

Mounting Overview

Step 3

Snap the ceiling-mount clips onto a suspended ceiling rail (see

around the access point to plug the Ethernet cable, optional external antenna cable(s), optional power

supply cable, and optional Kensington MicroSaver security cable into the sides of the access point.

Figure 9

Step 4

Attach the cables (Ethernet and optional antennas) to the sides of the access point.

Note

Step 5

Repeat Steps 1 to 4 for each suspended ceiling access point location.

After mounting all suspended ceiling access points, return to deploying the access points,

page

2-7.

Cisco Aironet 1000 Series Lightweight Access Point Hardware Installation Guide

2-12

Mounting the Access Point with Ceiling-Mount Clips to a Suspended Ceiling Rail

Ensure that the cables are routed away from the access point integrated antennas.

When the access point is powered up and is associated with a controller (Power LED is green,

Alarm LED is off, and the radio LEDs are blinking), the access point radios are operational and

broadcasting their beacons.

Chapter 2

Installing the Access Point

Figure

9). Ensure you leave enough space

"Step 3-c" on

OL-9403-04

Table of Contents

Troubleshooting