4.12 Display Mask
4.12 Display Mask
Removing the Display Mask
Remove the display mask according to the following procedures and Figure 4-25.
1. Remove the following 4 seals on the display module in that order:
- Two black seals on the bottom
- Two black seals on the top
2. Remove the following 4 screws on the display module, in that order:
- Two M2.5x5 black flat head screws on the top
- Two M2.5x5 black flat head screws on bottom
3. Release the following 24 latches on the display mask, in that order:
- Nine bottom latches
- Five latches on each of the left and right sides
- Ten top latches
Figure 4-25 Removing the display mask
Satellite L300D/L305D/ Satellite Pro L300D/ EQUIUM L300D/ SATEGO L300D Maintenance Manual
4 Replacement Procedures
4-41