hit counter script
Asus M2N-VM HDMI User Manual
  1. Manuals
  2. Brands
  3. Asus Manuals
  4. Motherboard
  5. M2N-VM - Motherboard - Micro ATX
  6. User manual

Asus M2N-VM HDMI User Manual

User manual
Hide thumbs Also See for M2N-VM HDMI:
Table of Contents

Advertisement

Quick Links

M2N-VM HDMI

Advertisement

Table of Contents
loading

Related Manuals for Asus M2N-VM HDMI

Summary of Contents for Asus M2N-VM HDMI

  • Page 1 M2N-VM HDMI...
  • Page 2 Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing.

  • Page 3: Table Of Contents

    Contents Notices ......................vi Safety information ..................vii About this guide ..................viii M2N-VM HDMI specifications summary ............ x Chapter 1: Product introduction Welcome! ..................1-2 Package contents ................. 1-2 Special features ................1-2 1.3.1 Product highlights ............1-2 1.3.2 Innovative ASUS features ..........
  • Page 4 Chapter 2: BIOS setup Managing and updating your BIOS ..........2-2 2.1.1 Creating a bootable floppy disk ........2-3 2.1.2 ASUS EZ Flash 2 utility ........... 2-4 2.1.3 AFUDOS utility ..............2-5 2.1.4 ASUS CrashFree BIOS 3 utility ........2-7 2.1.5...
  • Page 5 2.6.3 Boot Settings Configuration .......... 2-37 2.6.4 Security ................. 2-38 Tools menu ................. 2-40 ASUS EZ Flash 2 ................. 2-40 Exit menu ..................2-41 Chapter 3: Software support Installing an operating system ........... 3-2 Support CD information .............. 3-2 3.2.1 Running the support CD ..........

  • Page 6: Notices

    Notices Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • This device may not cause harmful interference, and • This device must accept any interference received including interference that may cause undesired operation.

  • Page 7: Safety Information

    Safety information Electrical safety • To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system. • When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected. If possible, disconnect all power cables from the existing system before you add a device.

  • Page 8: About This Guide

    Refer to the following sources for additional information and for product and software updates. ASUS websites The ASUS website provides updated information on ASUS hardware and software products. Refer to the ASUS contact information. Optional documentation Your product package may include optional documentation, such as warranty flyers, that may have been added by your dealer.

  • Page 9: Conventions Used In This Guide

    Conventions used in this guide To ensure that you perform certain tasks properly, take note of the following symbols used throughout this manual. DANGER/WARNING: Information to prevent injury to yourself when trying to complete a task. CAUTION: Information to prevent damage to the components when trying to complete a task.

  • Page 10: M2N-Vm Hdmi Specifications Summary

    M2N-VM HDMI specifications summary Support AMD socket AM2 for AMD Athlon™ 64 FX / Athlon™ 64 X2 / Athlon™ 64 / Sempron / AM2+ processors AMD64 architecture enables simultaneous 32-bit and 64-bit computing Supports AMD Cool ‘n’ Quiet™ Technology Chipset...
  • Page 11 M2N-VM HDMI specifications summary BIOS features 8 Mb Flash ROM, AMI BIOS, PnP, DMI2.0, WfM2.0, SM BIOS 2.5 Manageability WfM2.0, DMI2.0, WOR by Ring, PME Wake Up ASUS Overclocking SFS (Stepless Frequency Selection) from 200MHz to Features 300MHz at 1MHz increment Adjustable CPU Voltage at 0.025V increment...

  • Page 13: Chapter 1: Product Introduction

    This chapter describes the motherboard features and the new technologies it supports. Product introduction...

  • Page 14: Welcome

    ® The motherboard delivers a host of new features and latest technologies, making it another standout in the long line of ASUS quality motherboards! Before you start installing the motherboard, and hardware devices on it, check the items in your package with the list below.
  • Page 15 DDR2 1066 is for AM2+ only. Serial ATA 3Gb/s technology The motherboard supports SATA hard drives based on the new SATA 3Gb/s storage specification. It allows RAID 0, RAID 1, RAID 5, RAID 10, and JBOD configurations for four SATA connectors. ASUS M2N-VM HDMI...

  • Page 16: High Definition Audio

    PCI Express™ interface The motherboard fully supports PCI Express, the latest I/O interconnect technology that speeds up the PCI bus. PCI Express features point-to-point serial interconnections between devices and allows higher clockspeeds by carrying data in packets. This high speed interface is software compatible with existing PCI specifications.

  • Page 17: Innovative Asus Features

    See page 2-35 for details. ASUS CrashFree BIOS 3 The ASUS CrashFree BIOS 3 allows users to restore corrupted BIOS data from a USB flash disk containing the BIOS file. See page 2-7 for details.

  • Page 18: Before You Proceed

    ON, in sleep mode, or in soft-off mode. This is a reminder that you should shut down the system and unplug the power cable before removing or plugging in any motherboard component. The illustration below shows the location of the onboard LED. M2N-VM HDMI SB_PWR Standby Powered...

  • Page 19: Motherboard Overview

    Motherboard overview 1.5.1 Motherboard layout ASUS M2N-VM HDMI...

  • Page 20: Placement Direction

    Place six (6) screws into the holes indicated by circles to secure the motherboard to the chassis. Do not overtighten the screws! Doing so can damage the motherboard. Place this side towards the rear of the chassis M2N-VM HDMI Chapter 1: Product introduction...

  • Page 21: Central Processing Unit (Cpu)

    Unlock the socket by pressing the lever sideways, then lift it up to a 90°-100° angle. Socket lever Ensure that the socket lever is lifted up to 90°-100° angle, otherwise the CPU does not fit in completely. ASUS M2N-VM HDMI...
  • Page 22 Connect the CPU fan cable to the CPU_FAN connector on the motherboard. M2N-VM HDMI Do not forget to connect the CPU fan connector! Hardware monitoring errors can occur if you fail to plug this connector.

  • Page 23: Installing The Heatsink And Fan

    Retention bracket lock Your boxed CPU heatsink and fan assembly should come with installation instructions for the CPU, heatsink, and the retention mechanism. If the instructions in this section do not match the CPU documentation, follow the latter. ASUS M2N-VM HDMI 1-11...
  • Page 24 Attach one end of the retention bracket to the retention module base. Align the other end of the retention bracket (near the retention bracket lock) to the retention module base. A clicking sound denotes that the retention bracket is in place. Ensure that the fan and heatsink assembly perfectly fits the retention mechanism module...

  • Page 25: System Memory

    240-pin footprint compared to the 184-pin DDR DIMM. DDR2 DIMMs are notched differently to prevent installation on a DDR DIMM socket. The figure illustrates the location of the DDR2 DIMM sockets: M2N-VM HDMI M2N-VM HDMI 240-pin DDR2 DIMM Sockets Channel Sockets Channel A...
  • Page 26 • When using only one memory module, start installing the DDR2 DIMM from slot DIMM_A1 or DIMM_B1 for better overclocking capability. • For dual-channel configuration (2), you may: install identical DIMMs in all four sockets OR install identical DIMM pair in DIMM_A1 and DIMM_B1 (yellow sockets) and another identical DIMM pair in DIMM_A2 and DIMM_B2 (black sockets) •...
  • Page 27 Apacer AU01GE667C5KBGC Apacer AM4B5708MIJS7E0627B • • 512MB ADATA M20EL5G3H3160B1C0Z N/A Elpida E5108AE-6E-E • • VDATA M2GVD5G3I4176I1C52 VDATA VD29608A8A-3EG20641 • • 512MB AL6E8E63J-6E1 A3R12E3JFF717B9A00 • • AL7E8E63B-6E1K A3R12E3GEF637BLC5N • • 512MB Nanya NT512T64U88A1BY-3C Nanya NT5TU64M8AE-3C • • ASUS M2N-VM HDMI 1-15...
  • Page 28 Dual-channel memory configuration. • C*: Supports four modules inserted into both the yellow slots and the black slots as two pairs of Dual-channel memory configuration. Visit the ASUS website for the latest DDR2-667/800/1066MHz QVL. 1-16 Chapter 1: Product introduction...

  • Page 29: Installing A Dimm

    DIMM. DDR2 DIMM notch Support the DIMM lightly with your fingers when pressing the retaining clips. The DIMM might get damaged when it flips out with extra force. Remove the DIMM from the socket. ASUS M2N-VM HDMI 1-17...

  • Page 30: Expansion Slots

    Expansion slots In the future, you may need to install expansion cards. The following sub-sections describe the slots and the expansion cards that they support. Ensure to unplug the power cord before adding or removing expansion cards. Failure to do so may cause you physical injury and damage motherboard components.

  • Page 31: Interrupt Assignments

    When using PCI cards on shared slots, ensure that the drivers support “Share IRQ” or that the cards do not need IRQ assignments. Otherwise, conflicts will arise between the two PCI groups, making the system unstable and the card inoperable. ASUS M2N-VM HDMI 1-19...

  • Page 32: Pci Slots

    1.8.3 PCI slots The PCI slots support cards such as a LAN card, SCSI card, USB card, and other cards that comply with PCI specifications. The figure shows a LAN card installed on a PCI slot. 1.8.4 PCI Express x1 slot This motherboard supports PCI Express x1 network cards, SCSI cards and other cards that comply with the PCI Express...

  • Page 33: Jumpers

    You do not need to clear the RTC when the system hangs due to overclocking. For system failure due to overclocking, use the C.P.R. (CPU Parameter Recall) feature. Shut down and reboot the system so the BIOS can automatically reset parameter settings to default values. ASUS M2N-VM HDMI 1-21...
  • Page 34 USBPW910 jumpers are for the internal USB connectors that you can connect to additional USB ports. M2N-VM HDMI M2N-VM HDMI USB Device Wake Up • The USB device wake-up feature requires a power supply that can provide 500mA on the +5VSB lead for each USB port. Otherwise, the system will not power up.
  • Page 35 HDM/DVI_TX D2P 14 HDM/DVI_TX D2P 14 HDMI TXD1P HDMI TXD1P HDM/DVI_TX D1P 14 HDM/DVI_TX D1P 14 HDMI TXD1N HDMI TXD1N HDM/DVI_TX D1N 14 HDM/DVI_TX D1N 14 HDMI_SCL HDMI_SCL M2N-VM HDMI HDJ1 Setting HDMI_SDA HDMI_SDA HDMI (Default) ASUS M2N-VM HDMI 1-23...

  • Page 36: 1.10 Connectors

    1.10 Connectors 1.10.1 Rear panel connectors PS/2 mouse port (green). This port is for a PS/2 mouse. Video Graphics Adapter (VGA) port. This 15-pin port is for a VGA monitor or other VGA-compatible devices. LAN (RJ-45) port. Supported by Marvell Gigabit LAN controller, this port allows Gigabit connection to a Local Area Network (LAN) through a network hub.
  • Page 37 Using the CPU/Memory of higher speed and bandwidth with the higher-version DVD player and drivers will upgrade the playback quality. 14. PS/2 keyboard port (purple). This port is for a PS/2 keyboard. ASUS M2N-VM HDMI 1-25...

  • Page 38: Internal Connectors

    Pin 5 on the connector is removed to prevent incorrect cable connection when using an FDD cable with a covered Pin 5. M2N-VM HDMI FLOPPY PIN1 NOTE: Orient the red markings on the floppy ribbon cable to PIN 1.
  • Page 39 • Use the 80-conductor IDE cable for Ultra DMA 133/100/66 IDE devices. If any device jumper is set as “Cable-Select,” ensure that all other device jumpers have the same setting. M2N-VM HDMI IDE Connector M2N-VM HDMI ASUS M2N-VM HDMI 1-27...

  • Page 40: Serial Ata Hard Disk Drive Connection

    If you install Serial ATA hard disk drives, you can create a RAID 0, RAID 1, RAID 5, RAID 10, and JBOD configuration through the onboard controller. M2N-VM HDMI Install the Windows XP Service Pack 1 before using Serial ATA.
  • Page 41 DO NOT place jumper caps on the fan connectors. Only CPU Fan supports Q-Fan. M2N-VM HDMI M2N-VM HDMI FAN Connectors Digital audio connector (4-1 pin SPDIF_OUT) This connector is for an additional Sony/Philips Digital Interface (S/PDIF) port(s). Connect the S/PDIF module cable to this connector, then install the module to a slot opening at the back of the system chassis.
  • Page 42 These USB connectors comply with USB 2.0 specification that supports up to 480 Mbps connection speed. M2N-VM HDMI Never connect a 1394 cable to the USB connectors. Doing so will damage the motherboard! The USB 2.0 module is purchased separately.
  • Page 43 Front Panel Type item in the BIOS is set to [HD AC`97 Audio]; if you want to connect an front panel audio module to this connector, set the item to [AC97]. See page 2-29 for details. ASUS M2N-VM HDMI 1-31...
  • Page 44 These connectors are for an ATX power supply. The plugs from the power supply are designed to fit these connectors in only one orientation. Find the proper orientation and push down firmly until the connectors completely fit. M2N-VM HDMI • We recommend that you use an ATX 12 V Specification 2.0-compliant power supply unit (PSU) with a minimum of 300 W power rating.

  • Page 45: Lpt Connector

    12. LPT connector The LPT (Line Printing Terminal) connector supports devices such as a printer. LPT standardizes as IEEE 1284, which is the parallel port interface on IBM PC-compatible computers. M2N-VM HDMI ASUS M2N-VM HDMI 1-33...

  • Page 46: System Panel Connector

    13. System panel connector (20-8 pin PANEL) This connector supports several chassis-mounted functions. M2N-VM HDMI System power LED (2-pin PLED) • This 2-pin connector is for the system power LED. Connect the chassis power LED cable to this connector. The system power LED lights up when you turn on the system power, and blinks when the system is in sleep mode.

  • Page 47: Chapter 2: Bios Setup

    This chapter tells how to change the system settings through the BIOS Setup menus. Detailed descriptions of the BIOS parameters are also provided. BIOS setup...

  • Page 48: Managing And Updating Your Bios

    The following utilities allow you to manage and update the motherboard Basic Input/Output System (BIOS) setup. ASUS EZ Flash 2: Updates the BIOS using a floppy disk, USB Flash, or the motherboard support CD during POST. ASUS AFUDOS: Updates the BIOS in DOS mode using a bootable floppy disk.
  • Page 49 Right-click Floppy Disk Drive then click Format to display the Format 3 1/2 Floppy dialog box . d. Select the Create an MS-DOS startup disk check box. e. Click Start. Copy the original or the latest motherboard BIOS file to the bootable floppy disk. ASUS M2N-VM HDMI...

  • Page 50: Asus Ez Flash 2 Utility

    2.1.2 ASUS EZ Flash 2 utility The ASUS EZ Flash 2 feature allows you to update the BIOS without having to go through the long process of booting from a floppy disk and using a DOS-based utility. The EZ Flash 2 utility is built-in the BIOS chip so it is accessible by pressing <Alt>...

  • Page 51: Afudos Utility

    Extension name Press <Enter>. The utility copies the current BIOS file to the floppy disk. A:\>afudos /oOLDBIOS1.rom AMI Firmware Update Utility - Version 1.19(ASUS V2.29(03.11.24BB)) Copyright (C) 2002 American Megatrends, Inc. All rights reserved. Reading flash ..done Write to file..ok A:\>...

  • Page 52: Updating The Bios File

    Updating the BIOS file To update the BIOS file using the AFUDOS utility: Visit the ASUS website (www.asus.com) and download the latest BIOS file for the motherboard. Save the BIOS file to a bootable floppy disk. Write the BIOS filename on a piece of paper. You need to type the exact BIOS filename at the DOS prompt.

  • Page 53: Asus Crashfree Bios 3 Utility

    2.1.4 ASUS CrashFree BIOS 3 utility The ASUS CrashFree BIOS 3 is an auto recovery tool that allows you to restore the BIOS file when it fails or gets corrupted during the updating process. You can update a corrupted BIOS file using the motherboard support CD , the floppy disk or the USB flash disk that contains the updated BIOS file.

  • Page 54: Recovering The Bios From The Support Cd

    Restart the system after the utility completes the updating process. • Only the USB flash disk with FAT 32/16 format and single partition can support ASUS CrashFree BIOS 3. The device size should be smaller than 8GB. • DO NOT shut down or reset the system while updating the BIOS! Doing so...

  • Page 55: Asus Update Utility

    2.1.5 ASUS Update utility The ASUS Update is a utility that allows you to manage, save, and update the motherboard BIOS in Windows environment. The ASUS Update utility allows you ® • Save the current BIOS file • Download the latest BIOS file from the Internet •...
  • Page 56 To update the BIOS through the Internet: desktop by clicking Start Launch the ASUS Update utility from the Windows ® > Programs > ASUS > ASUSUpdate > ASUSUpdate. The ASUS Update main window appears. Select Update BIOS from Select the ASUS FTP site nearest...
  • Page 57 To update the BIOS through a BIOS file: Launch the ASUS Update utility from the Windows desktop by clicking Start ® > Programs > ASUS > ASUSUpdate > ASUSUpdate. The ASUS Update main window appears. Select Update BIOS from a file option from the drop-down menu, then click Next.

  • Page 58: Bios Setup Program

    The BIOS setup screens shown in this section are for reference purposes only, and may not exactly match what you see on your screen. • Visit the ASUS website (www.asus.com) to download the latest BIOS file for this motherboard. 2-12...

  • Page 59: Bios Menu Screen

    The BIOS setup screens shown in this chapter are for reference purposes only, and may not exactly match what you see on your screen. • Visit the ASUS website (www.asus.com) to download the latest BIOS information. ASUS M2N-VM HDMI 2-13...

  • Page 60: Navigation Keys

    2.2.3 Navigation keys At the bottom right corner of a menu screen are the navigation keys for that particular menu. Use the navigation keys to select items in the menu and change the settings. Some of the navigation keys differ from one screen to another. 2.2.4 Menu items The highlighted item on the menu bar displays the specific items for that menu.

  • Page 61: Main Menu

    Allows you to set the system date. 2.3.3 Legacy Diskette A [1.44M, 3.5 in.] Sets the type of floppy drive installed. Configuration options: [Disabled] [720K , 3.5 in.] [1.44M, 3.5 in.] [360K, 5.25 pin] [1.2M 5.25 pin] [2.88M, 3.5 pin] ASUS M2N-VM HDMI 2-15...

  • Page 62: Ide Configuration

    2.3.4 IDE Configuration The items in this menu allow you to set or change the configurations for the IDE devices installed in the system. Select an item then press <Enter> if you wish to configure the item. Disabled: disables IDE Configuration the integrated IDE Controller.

  • Page 63: Primary Ide Master/Slave

    When set to [Disabled], the data transfer from and to the device occurs one sector at a time. Configuration options: [Disabled] [Auto] ASUS M2N-VM HDMI 2-17...
  • Page 64 PIO Mode [Auto] Selects the PIO mode. Configuration options: [Auto] [0] [1] [2] [3] [4] DMA Mode [Auto] Selects the DMA mode. Configuration options: [Auto] SMART Monitoring [Auto] Enables or disables the S.M.A.R.T. (Self Monitoring and Reporting Technology) capability of your hard drive. This features allows your system to report read/write errors of the hard drive and to issue warnings when a third party hardware monitor utility is installed.

  • Page 65: Sata1, Sata2, Sata3, And Sata4

    When set to [Disabled], the data transfer from and to the device occurs one sector at a time. Configuration options: [Disabled] [Auto] PIO Mode [Auto] Selects the PIO mode. Configuration options: [Auto] [0] [1] [2] [3] [4] ASUS M2N-VM HDMI 2-19...

  • Page 66: System Information

    DMA Mode [Auto] Selects the DMA mode. Configuration options: [Auto] [SWDMA0] [SWDMA1] [SWDMA2] [MWDMA0] [MWDMA1] [MWDMA2] [UDMA0] [UDMA1] [UDMA2] [UDMA3] [UDMA4] [UDMA5] [UDMA6] SMART Monitoring [Auto] Enables or disables the S.M.A.R.T. (Self Monitoring and Reporting Technology) capability of your hard drive. This features allows your system to report read/write errors of the hard drive and to issue warnings when a third party hardware monitor utility is installed.

  • Page 67: Advanced Menu

    [Auto] - allows you to set overclocking parameters automatically. [MANUAL] - allows you to individually set overclocking parameters. [Standard] - loads the standard settings for the system. [Overclock Profile] - loads overclocking profiles with optimal parameters for stability when overclocking. ASUS M2N-VM HDMI 2-21...
  • Page 68 The following item appears only when the AI Overclocking item is set to [MANUAL]. CPU Frequency (MHz) [200.0] Displays the frequency sent by the clock generator to the system bus and PCI bus. The value of this item is auto-detected by the BIOS. Use the < > and < > keys to adjust the CPU frequency.

  • Page 69: Cpu Configuration

    Allows you to enable or disable the generation of ACPI_PPC, _PSS, and _PCT objects. Configuration options: [Disabled] [Enabled] ACPI SRAT Table [Enabled] Allows you to enable or disable the ACPI SRAT table. Configuration options: [Disabled] [Enabled] ASUS M2N-VM HDMI 2-23...
  • Page 70 AMD Overlooking Configuration AMD Overlooking Configuration Configure CPU Frequence. Processor Frequency Multiplier [Auto] Processor Voltage [Auto] Processor Frequency Multiplier [Auto] Allows you to select Processor frequency. Configuration options: [Auto] [x5.0 1000 MHz] [x5.5 1100 MHz] [x6.5 1300 MHz] [x7.5 1500 MHz] [x8.0 1600 MHz] [x8.5 1700 MHz] [x9.0 1800 MHz] Processor Voltage [Auto] Allows you to select the Processor voltage or set it to auto for safe mode.

  • Page 71: Chipset

    Power Down Enable [Enabled] Power Down Mode [Channel] Bank Interleaving [Auto] Allows you to enable the bank memory interleaving. Configuration options: [Disabled] [Auto] Channel Interleaving [Auto] Allows you to enable the channel memory interleaving. Configuration options: [Disabled] [Auto] ASUS M2N-VM HDMI 2-25...

  • Page 72: Dram Timing Configuration

    Enable Clock to All DIMMs [Disabled] Enables or disables clock to all DIMMs. Configuration options: [Disabled] [Enabled] MemClk Tristate C3/ALTVID [Disabled] Enables or disables the MemClk Tristate C3/ALTVID. Configuration options: [Disabled] [Enabled] Memory Hole Remapping [Enabled] Enables or disables the memory remapping around memory hole. Configuration options: [Disabled] [Enabled] Power Down Enable [Enabled] Enables or disables the DDR power down mode.

  • Page 73: Ecc Configuration

    Disables or sets the Data Cache BG Scrub. This item allows the data cache BG Scrub RAM to be corrected when idle. Configuration options: [Disabled] [40ns] [80ns] [160na] [320ns] [640ns] [1.28us] [2.56us] [5.12us] [10.2us] [20.5us] [41.0us] [81.9us] [163.8us] [327.7us] [655.4us] ASUS M2N-VM HDMI 2-27...

  • Page 74: Southbridge Configuration

    SouthBridge Configuration SouthBridge chipset Configuration Display Device Priority, from high to low Primary Graphics Adapter [PCIE-> PCI -> IGP] iGPU Frame Buffer Detect [Auto] iGPU Frame Buffer Size [128MB] AZALIA AUDIO [Inernal codec + E] Front Panel Select [HD Audio] OnBoard LAN [Auto] OnBoard LAN Boot ROM...

  • Page 75: Onboard Devices Configuration

    Allows you to select the Parallel Port base addresses. Configuration options: [Disabled] [378] [278] [3BC] Parallel Port Mode [Normal] Allows you to select the Parallel Port mode. Configuration options: [Normal] [EPP] [ECP] [EPP+ECP] Parallel Port IRQ [IRQ7] Configuration options: [IRQ5] [IRQ7] ASUS M2N-VM HDMI 2-29...

  • Page 76: Pci Pnp

    2.4.5 PCI PnP The PCI PnP menu items allow you to change the advanced settings for PCI/PnP devices. The menu includes setting IRQ and DMA channel resources for either PCI/PnP or legacy ISA devices, and setting the memory size block for legacy ISA devices.

  • Page 77: Usb Configuration

    USB flash drives and USB hard drives. Setting to Auto allows the system to detect the presence of USB devices at startup. If detected, the USB controller legacy mode is enabled. If no USB device is detected, the legacy USB support is disabled. Configuration options: [Disabled] [Enabled] [Auto] ASUS M2N-VM HDMI 2-31...

  • Page 78: Usb Mass Storage Device Configuration

    USB 2.0 Controller Mode [HiSpeed] Allows you to configure the USB 2.0 controller in HiSpeed (480 Mbps) or Full Speed (12 Mbps). Configuration options: [Full Speed] [HiSpeed] BIOS EHCI Hand-Off [Enabled] Allows you to configure the BIOS EHCI Hand-Off. Configuration options: [Disabled] [Enabled] USB Mass Storage Device Configuration Number of seconds USB Mass Storage Device Configuration...

  • Page 79: Power Menu

    Allows you to enable or disable the Advanced Configuration and Power Interface (ACPI) support in the Application-Specific Integrated Circuit (ASIC). When set to Enabled, the ACPI APIC table pointer is included in the RSDT pointer list. Configuration options: [Disabled] [Enabled] ASUS M2N-VM HDMI 2-33...

  • Page 80: Apm Configuration

    2.5.4 APM Configuration APM Configuration Go into On/Off or Suspend when Power Button Mode [On/Off] Power button is Restore on AC Power Loss [Power Off] pressed. Power On By PCI (-E) Device [Disabled] Power On By Ring [Disabled] Power On By PS/2 KB/MS [Disabled] Power On By RTC Alarm [Disabled]...

  • Page 81: Hardware Monitor

    The onboard hardware monitor automatically detects the voltage output through the onboard voltage regulators. Smart Q-Fan Function [Disabled] Allows you to enable or disable the ASUS Q-Fan feature that smartly adjusts the fan speeds for more efficient system operation. Configuration options: [Disabled] [Enabled]...

  • Page 82: Boot Menu

    Boot menu The Boot menu items allow you to change the system boot options. Select an item then press <Enter> to display the sub-menu. Specifies the Boot Boot settings Device Priority sequence. Boot Device Priority Hard Disk Drives A virtual floopy disk drive (Floppy Drive Boot Settings Configuration B:) may appear when...

  • Page 83: Boot Settings Configuration

    This allows you to enable or disable the full screen logo display feature. Configuration options: [Disabled] [Enabled] Set this item to [Enabled] to use the ASUS MyLogo 2™ feature. Add On ROM Display Mode [Force BIOS] Sets the display mode for option ROM. Configuration options: [Force BIOS] [Keep...

  • Page 84: Security

    Interrupt 19 Capture [Disabled] When set to [Enabled], this function allows the option ROMs to trap Interrupt 19. Configuration options: [Disabled] [Enabled] 2.6.4 Security The Security menu items allow you to change the system security settings. Select an item then press <Enter> to display the configuration options. Security Settings <Enter>...

  • Page 85: Change User Password

    Password Check [Setup] When set to [Setup], BIOS checks for user password when accessing the Setup utility. When set to [Always], BIOS checks for user password both when accessing Setup and booting the system. Configuration options: [Setup] [Always] ASUS M2N-VM HDMI 2-39...

  • Page 86: Tools Menu

    1. NTFS format ASUS EZ Flash 2 Allows you to run ASUS EZ Flash 2. When you press <Ok>, a confirmation message appears. Use the left/right arrow key to select between [Yes] or [No], then press <Ok> to confirm your choice.

  • Page 87: Exit Menu

    Setup menus. When you select this option or if you press <F5>, a confirmation window appears. Select OK to load default values. Select Exit & Save Changes or make other changes before saving the values to the non-volatile RAM. ASUS M2N-VM HDMI 2-41...
  • Page 88 2-42 Chapter 2: BIOS setup...

  • Page 89: Chapter 3: Software Support

    This chapter describes the contents of the support CD that comes with the motherboard package. Software support...

  • Page 90: Installing An Operating System

    NVIDIA GeFore 7050PV/nForce 630a chipset drivers package from v1417 and later version, does not support Windows 2000 operating system (OS); hence, ASUS support CD v406.02 and later version, cannot support Windows 2000 OS. If you want to use Windows 2000 OS on this motherboard, download the older version driver package from the ASUS website: http://support.asus.com/download/download.aspx?Language=en-...

  • Page 91: Drivers Menu

    The drivers menu shows the available device drivers if the system detects installed devices. Install the necessary drivers to activate the devices. ASUS InstAll - Drivers Installation Wizard Launches the ASUS InstallAll driver installation wizard. AMD Cool ‘n’ Quiet Driver Installs the AMD Cool ‘n’ Quiet driver.

  • Page 92: Utilities Menu

    This utility helps you keep your computer in healthy operating condition. ASUS Update The ASUS Update utility allows you to update the motherboard BIOS in a Windows environment. This utility requires an Internet connection either through a ®...
  • Page 93 You can also install the following utilities from the ASUS Superb Software Library CD. ADOBE Acrobat Reader V7.0 Installs the Adobe Acrobat Reader that allows you to open, view, and print ® ® documents in Portable Document Format (PDF). Microsoft DirectX 9.0c Installs the Microsoft DirectX 9.0c driver.

  • Page 94: Make Disk Menu

    3.2.4 Make Disk menu The Make Disk menu allows you to make a RAID driver disk. NVIDIA 32bit XP SATA RAID Driver Allows you to create the NVIDIA SATA RAID Driver disk for Windows 32-bit XP ® Operationg System (OS). NVIDIA 64bit XP SATA RAID Driver Allows you to create the NVIDIA SATA RAID Driver disk for Windows 64-bit XP...

  • Page 95: Manual Menu

    Reader from the Utilities menu before opening a user manual ® ® file. 3.2.6 ASUS Contact information Click the Contact tab to display the ASUS contact information. You can also find this information on the inside front cover of this user guide. ASUS M2N-VM HDMI...

  • Page 96: Other Information

    3.2.7 Other information The icons on the top right corner of the screen give additional information on the motherboard and the contents of the support CD. Click an icon to display the specified information. Motherboard Info Displays the general specifications of the motherboard. Browse this CD Displays the support CD contents in graphical format.

  • Page 97: Technical Support Form

    Technical support Form Displays the ASUS Technical Support Request Form that you have to fill out when requesting technical support. Filelist Displays the contents of the support CD and a brief description of each in text format. ASUS M2N-VM HDMI...
  • Page 98 3-10 Chapter 3: Software support...

Table of Contents