Using The Lower Thread Counter - Brother BAS-326G PS Instruction Manual
Direct drive programmable electronic pattern sewer
Hide thumbs
Also See for BAS-326G PS:
- Service manual (152 pages) ,
- Manual de instrucciones (84 pages) ,
- Parts manual (82 pages)
Table of Contents
Advertisement
6-4. Using the lower thread counter
If you use the lower thread counter to set the number of articles which can be sewn with the amount of lower thread
available, you can stop the lower thread running out in the middle of sewing a pattern.
<Setting defaults>
1
TEST indicator illuminates, COUNTER indicator flashes
2
4456Q
3
Ending setting mode
<Lower thread counter operation>
If you press the SELECT key (1) to select the counter display menu when memory switch no. 300 is set to "OFF", the
COUNTER indicator will illuminate and the lower thread counter will appear in the menu display (2).
6. USING THE OPERATION PANEL (ADVANCED OPERATIONS)
Press the
or
• The initial value can be set from 1 ("0001") to 9999 ("9999").
• If the initial value is set to "0000", the lower thread counter will not operate.
• If you press the RESET key during setting mode, the value will become
"0000".
If you press the R/W key during setting mode, the initial value for
the program number being displayed will be stored, and you can
set the lower thread counter separately for each item of sewing
data.
TEST indicator switches off
4963Q
BAS-326G PS
While pressing the TEST key, press the
• The initial value which was set previously will appear in
the menu display.
key to set the initial value.
Press the TEST key.
• The initial value will be memorized.
1. Each time the sewing of a single article is completed,
the value shown in the menu display (2) is reduced by 1.
2. When the lower thread counter reaches "0000", the
buzzer will sound continuously. The sewing machine will
not operate during this time, even if the foot switch is
depressed.
3. When you press the RESET key (3), the buzzer will stop,
the initial value will appear in the menu display (2) and
sewing will be possible.
•
If no initial value has been set, the display will be
"0000".
* You can press the
thread counter to a desired value. However, this value
will not be stored as the initial value.
* If a lower thread counter value is set, the lower thread
counter will operate even if the lower thread counter is
not being displayed.
key.
4962Q
or
key (4) to set the lower
4455Q
34
Hide quick links:
Advertisement
Table of Contents
