Cisco AS5350XM Configuration Manual page 37
Universal gateways software configuration guide
Hide thumbs
Also See for AS5350XM:
- Installation manual (98 pages) ,
- Quick start manual (69 pages) ,
- Installation manual (104 pages)
Table of Contents
Advertisement
Understanding Basic Hardware Architecture and Cisco IOS Software
It might take a minute or two to save the configuration to NVRAM. After the configuration has been
saved, the following appears:
[OK]
Router#
You can use the question mark (?) and arrow keys to help you enter commands.
Timesaver
Each command mode restricts you to a set of commands. If you are having difficulty entering a
Timesaver
command, check the prompt and then enter the question mark (?) for a list of available commands. You
might be in the wrong command mode or using the wrong syntax.
Timesaver
If you want to disable a feature, enter the keyword no before the command; for example, no ip routing.
You need to save your configuration changes to NVRAM so that they are not lost if there is a system
Timesaver
reload or power outage.
Upgrading to a New Cisco IOS Release
Obtain new Cisco IOS features and more stable code by upgrading to a new Cisco IOS release.
Step 1
Display the contents of flash memory:
Router# cd flash:
Router# dir
Directory of flash:/
1
-rw-
32768000 bytes total (13041600 bytes free)
Copy the new image from the remote TFTP server into flash memory. Make sure that you specify your
Step 2
own TFTP server's IP address and Cisco IOS filename. If you encounter issues with upgrading the
image, be sure that you can ping the TFTP server and that appropriate directory permissions are
configured on the TFTP server. To see the bangs (!) during the download operation, enable line wrap in
your terminal emulation software.
Note
9950528
Jan 01 2000 00:48:59
If you have available space for two images, leave both images in flash memory. If necessary, you
can easily revert back to the previous image. Enter the boot system flash newiosname.bin
command to point to the new image filename. By default, the first image in flash memory is
loaded.
If you do not have available space, during the copy operation the system displays a message
telling you to delete the current file and squeeze the flash memory to make room for the new
image. Enter the delete flash:version command, followed by the squeeze flash command, to
perform this delete-and-squeeze operation. Then proceed with the copy operation.
Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide
Upgrading to a New Cisco IOS Release
c5350-js-mz.121-1.XD1.bin
9
- Quick Links:
- Using the Cli
- Managing Ports
Hide quick links:
Advertisement
Table of Contents
