Advertisement
PERATOR'S MANUAL
T
®
1/2 in. HAMMER DRILL
VARIABLE SPEED/REVERSIBLE
DOUBLE iNSULATED
Model No.
315.101370
A
WARNING:
To reduce the risk of injury,
the user must read and understand the
operator's manual before using this product.
Customer
Help Line: 1-800-932-3188
Sears, Roebuck
and Co., 3333 Beverly Rd., Hoffman
Estates, IL 60179 USA
Visit the Craftsman web page: www.sears.com/craftsman
983000-753
6-14-06 (REV:01)
Save this
manual
for future
reference
Advertisement
Table of Contents
Related Manuals for Craftsman 10137 - 1/2 in. Corded Hammer Drill
Summary of Contents for Craftsman 10137 - 1/2 in. Corded Hammer Drill
- Page 1 Customer Help Line: 1-800-932-3188 Sears, Roebuck and Co., 3333 Beverly Rd., Hoffman Estates, IL 60179 USA Visit the Craftsman web page: www.sears.com/craftsman Save this manual for future reference 983000-753 6-14-06 (REV:01)
-
Page 2: One Year Full Warranty
If this Craftsman tool fails to give complete satisfaction within one year from date of purchase, RETURN IT TO THE NEAREST SEARS STORE IN THE UNITED STATES, and Sears will replace it, free of charge. If this Craftsman tool is used for commercial or rental purposes, this warranty applies for only 90 days from the date of purchase. - Page 3 [] Remove any adjusting key or wrench before turning WARNING! Read all instructions. Failure to follow the power tool on. A wrench or a key left attached to all instructions listed below may result in electric a rotating part of the power tool may result in personal shock, fire and/or serious injury.
- Page 4 SERVICE When servicing a power tool, use only identi- cal replacement parts. Follow instructions in the Have your power tool serviced by a qualified repair Maintenance section of this manual. Use of unau- person using only identical replacement parts. This thorized parts or failure to follow Maintenance instruc- will ensure that the safety of the power tool is main- tions may create a risk of shock or injury.
-
Page 5: Symbols
Someofthefollowing symbols maybeusedonthistool.Please study themandlearn theirmeaning. Proper i nterpreta- tionofthesesymbols willallowyouto operate thetoolbetterandsafer. SYMBOL NAME DESIGNATION/EXPLANATION Volts Voltage Current Am pe res Hertz Frequency (cycles per second) Watt Power Minutes Time Alternating Current Type of current Direct Current Type or a characteristic of current No Load Speed Rotational speed, at no load... - Page 6 Thefollowing signal w ordsandmeanings a reintended to explain the levels ofriskassociated w iththis product. SYMBOL SIGNAL MEANING Indicates an imminently hazardous situation, which, if not avoided, will DANGER: result in death or serious injury. Indicates a potentially hazardous situation, which, if not avoided, could WARNING: result in death or serious injury.
-
Page 7: Electrical
DOUBLE INSULATION EXTENSION CORDS Double insulation is a concept in safety in electric power When using a power tool at a considerable distance from tools, which eliminates the need for the usual three-wire a power source, be sure to use an extension cord that has grounded power cord. -
Page 8: Product Specifications
PRODUCTSPECiFICATiONS Chuck ............in. Keyless Blows Per Minute (BPM) ......0-16,000/min. Switch ........Variable Speed/Reversible Input ........V, 60 Hz, AC only, 6Amps No Load Speed ..........0-1,000/rain. Net Weight ............. 5.02 Ibs. AUXILIARY HANDLE DRILLING/HAMMER LEVELS MODESELECTOR DIRECTIONOF ROTATION (FORWARD/ REVERSE) DEPTH GAUGE... -
Page 9: Features
KNOW LEVELS YOUR HAMMER DRILL See Figure 1. Levels are located on the top and end of the motor hous- Before attempting to use this product, familiarize yourself ing to help keep the drill bit level during use. with all operating features and safety rules. LiVE TOOL iNDiCATOR The live tool indicator is located on the handle of the drill... - Page 10 KEYLESS CHUCK WARNING: Do not allow familiarity with tools See Figure 2. to make you careless. Remember that a careless The drill-driver has a keyless chuck that makes it simple to fraction of a second is sufficient to inflict serious tighten or release drill bits in the chuck jaws.
- Page 11 WARNING: Always unplug the tool when installing or removing bits, adjusting settings, or when the tool is not in use. Failure to unplug the tool may result in accidental starting and serious personal injury. SPINDLE LOCK See Figure 3. [] To lock the spindle, depress and hold the spindle lock button.
- Page 12 USING THE AUXILIARY HANDLE ASSEMBLY SELECTING HAMMER MODE OR DRILLING See Figure 5. MODE See Figure 6. An auxiliary handle is packed with the drill for ease of operation and to help prevent loss of control. The handle To adjust for type of drilling, slide the drilling mode selec- can be rotated 360 °...
- Page 13 WARNING: Before connecting the hammer drill to END ViEW a power supply source, always check to be sure it is not in lock-on position (depress and release the variable speed switch). Failure to ensure that it is not locked-on could result in accidental starting of the drill resulting in possible serious injury.
-
Page 14: Metal Drilling
WARNING" When servicing, use only identical spackling compounds, or plaster are subject to accel- Craftsman replacement parts. Use of any other parts erated wear and possible premature failure because the may create a hazard or cause product damage. fiberglass chips and grindings are highly abrasive to bear- ings, brushes, commutators, etc. -
Page 15: Chuck Removal
CHUCK REMOVAL Insert the hex key into the chuck and tighten the chuck jaws securely. Tap sharply with a mallet in a counter- See Figures 9 - 11. clockwise direction. This will loosen the chuck on the The chuck can be removed and replaced with a new one. spindle. - Page 16 Do not use any attachments or accessories not recommended by the manufacturer of this tool. The use of attachments or acces- sories not recommended can result in serious personal injury. CRAFTSMAN HAMMER DRILL - MODEL NUMBER 315.101370 SEENOTE NOTE: The assembly shown represents an important part of the Double Insulated System.
-
Page 17: Parts List
_" CRAFTSMAN HAMMER DRILL - MODEL NUMBER 315.101370 The model number will be found on a plate attached to the motor housing. Always mention the model number in all correspondence regarding your HAMMER DRILL or when ordering repair parts, SEE BACK... - Page 18 Your Home For repair-in your home-of all major brand appliances, lawn and garden equipment, or heating and cooling systems, no matter who made it, no matter who sold it! For the replacement parts, accessories owner's manuals that you need to do-it-yourself. For Sears professional installation of home appliances...