Table of Contents
Advertisement
Quick Links
Download this manual
See also:
User Manual
Advertisement
Table of Contents
Related Manuals for Asus P2-M2A690G - P Series - 0 MB RAM
Summary of Contents for Asus P2-M2A690G - P Series - 0 MB RAM
-
Page 1: Installation Manual
E4233 P-Series ASUS PC (Desktop Barebone) Installation manual Download the latest manual from the ASUS website: www.asus.com... -
Page 2: Front/Rear Panel Features
Front/Rear panel features P2 Front (Close) P4 Front (Close) Front (Open) Rear Opti cal drive eject button ( ) Power connector 12.** Voltage selector switch HDD LED ( ) Optical drive bay cover 13.* • PS/2 keyboard port ( Open the front panel cover •... -
Page 3: Internal Components
3.5-inch hard disk drive cage Power supply unit PCI/PCIE card riser bracket (connected to the motherboard PCI/PCIE slot) ASUS motherboard* DIMM sockets CPU socket NOTE: *Refer to the system User Guide for motherboard details. Removing the cover Remove the cover screws on the rear panel. Keep the screws for later use. - Page 4 Installing an Intel ® Locate the CPU socket on the Retention tab motherboard. Press the load lever with your thumb (A), then move it to the left (B) until it is released from the retention tab. CAUTION! To prevent damage to the Load lever socket pins, do not remove the PnP cap unless you are installing a CPU.
- Page 5 Removing an AMD CPU fan and heatsink assembly Remove two screws securing the blower to the CPU fan. Carefully lift each locking lever and detach its end from the hole of the retention module. Release the hook of each metal clip from the hole of the retention module.
-
Page 6: Installing A Dimm
Installing a DIMM Locate the DIMM sockets in the motherboard. Unlock a DIMM socket by pressing the retaining clips outward. Align a DIMM on the socket such that the notch on the DIMM matches the break on the socket. Push the DIMM to the socket until the retaining clips snap inward. CAUTION: •... -
Page 7: Installing Optical And Storage Drives
Installing optical and storage drives Turn the storage drive assembly upside down with the 3.5-inch bay on top of the 5.25-inch bay. Insert the optical drive upside down to the 5.25-inch bay, then secure it with two screws on both sides. Turn the storage drive assembly, insert the hard disk drive upside down to the 3.5-inch bay, then secure it with two screws on both sides. -
Page 8: Installing The Foot Stand
Installing the foot stand Insert the foot stand hooks into Pull the foot stand to the direction the holes on the chassis. of the arrow until the lock snaps in place. NOTE: To remove the foot stand, lift the lock, then slightly push the foot stand to the direction of the rear panel until it disengages from the chassis.