hit counter script
HP 510 Maintenance And Service Manual
  1. Manuals
  2. Brands
  3. HP Manuals
  4. Laptop
  5. 510 - Notebook PC
  6. Maintenance and service manual
HP 510 Maintenance And Service Manual

HP 510 Maintenance And Service Manual

Notebook pc
Hide thumbs Also See for 510:
Table of Contents

Advertisement

Quick Links

See also: Reference Manual , User Manual
HP 510 Notebook PC
Maintenance and Service Guide

Advertisement

Table of Contents
loading

Related Manuals for HP 510

Summary of Contents for HP 510

  • Page 1 HP 510 Notebook PC Maintenance and Service Guide...

  • Page 3: Table Of Contents

    Table of contents 1 Product description 2 External component identification Top components ........................... 4 Pointing devices ........................4 Keys ............................. 5 Buttons and lights ........................ 6 Front components ..........................7 Right-side components ......................... 8 Left-side components ........................... 9 Bottom components ........................... 10 3 Unknown user password 4 Illustrated parts catalog Serial number location ........................
  • Page 5 Backing up the system ....................... 95 Backing up specific files or folders ..............95 Backing up the entire hard drive ..................96 Backing up modifications made to the system ..............97 Scheduling backups ......................97 Recovery ............................97 Creating recovery discs (highly recommended) ..............98 Performing a recovery .......................
  • Page 6 ENWW...

  • Page 7: Product Description

    WLAN WLAN local area network (WLAN) Product Name HP 510 Notebook PC √ √ √ Processors Intel® Pentium® M 770 (2.13-GHz) Processor 533-MHz front √ side bus (FSB), 1-MB L2 cache, socketed Intel Celeron® M 360 (1.40-GHz) Processor 400-MHz FSB, √...
  • Page 8 Category Description System System System board board board 910GML 910GML 915GM without with with wireless WLAN WLAN local area network (WLAN) ● Optical drives 12.7-mm tray load √ √ √ (fixed) ● Parallel ATA ● Fixed, no modular requirements (1 screw removal) DVD±RW and CD-RW Super Multi Double-Layer Combo Drive √...
  • Page 9 4-cell, 2.2-Ahr Li-ion battery (32 Whr) √ √ √ requirements NOTE The HP 510 Notebook PC does not support Smart Battery technology. 65-W AC adapter with localized cable plug support (2-wire plug √ √ √ with ground pin, supports 2-pin DC connector)

  • Page 10: External Component Identification

    External component identification Top components Pointing devices Item Component Function TouchPad Moves the pointer and selects or activates items on the screen. Left TouchPad button Functions like the left button on an external mouse. Right TouchPad button Functions like the right button on an external mouse. TouchPad scroll zone Scrolls up or down.

  • Page 11: Keys

    Keys Item Component Function Displays system information when pressed in combination with key. Executes frequently used system functions when pressed in combination with a function key or the key. Windows logo key Displays the Windows Start menu. Windows applications key Displays a shortcut menu for items beneath the pointer.

  • Page 12: Buttons And Lights

    Buttons and lights Item Component Function Caps lock light On: Caps lock is on. Internal display switch Turns off the display if the display is closed while the power is on. Wireless button (select models only) Turns the wireless feature on or off, but does not create a wireless connection.

  • Page 13: Front Components

    Front components Item Component Function Wireless antennae (select models only) Send and receive signals from one or more wireless devices. Battery light ● On: A battery is charging. ● Blinking: A battery that is the only available power source has reached a low-battery condition.

  • Page 14: Right-Side Components

    Right-side components Item Component Function Optical drive Reads an optical disc. Security cable slot Attaches an optional security cable to the computer. NOTE The security cable is designed to act as a deterrent, but it may not prevent the computer from being mishandled or stolen.

  • Page 15: Left-Side Components

    RJ-45 (network) jack Connects a network cable. Power connector Connects an AC adapter. NOTE The HP 510 Notebook PC does not support Smart AC adapter technology. External monitor port Connects an optional VGA external monitor or projector. PC Card slot Supports optional Type I or Type II 32-bit (CardBus) or 16-bit PC Cards.

  • Page 16: Bottom Components

    Bottom components Item Component Function Battery bay Holds the battery. NOTE The HP 510 Notebook PC does not support Smart Battery technology. Battery release latches (2) Release the battery from the battery bay. Hard drive bay Holds the hard drive. Vent Enables airflow to cool internal components.

  • Page 17: Unknown User Password

    Unknown user password If the computer you are servicing has an unknown user password, follow these steps to clear the password. NOTE These steps also clear CMOS. Before disassembling the computer, follow these steps: Shut down the computer. If you are unsure whether the computer is off or in hibernation, turn the computer on, and then shut it down through the operating system.

  • Page 19: Computer Major Components

    Computer major components Item Description Spare part number Display assemblies 15.4-inch, WXGA BrightView display assembly for use only with computer models with 440716-001 wireless LAN capability (includes wireless antenna transceivers and cables) 15.4-inch, WXGA BrightView display assembly for use only with computer models 440715-001 without wireless LAN capability ENWW...
  • Page 20 Item Description Spare part number Switch covers For use only with computer models with wireless LAN capability (includes wireless 441623-001 button and wireless light) For use only with computer models without wireless LAN capability 441624-001 Button board 441632-001 Keyboards Belgium 438231-A41 Brazil 438531-201...
  • Page 21 Item Description Spare part number PC Card slot bezel 438527-001 PC Card assembly 438551-001 RTC battery 438556-001 Plastics/Hardware Kit 441630-001 (9a) Memory/Mini PCI card module cover (includes 1 captive screw, secured by a C-clip) (9b) Hard drive cover (includes 2 captive screws, secured by C-clips) (10) Heat sink (includes thermal paste) 438529-001...

  • Page 22: Display Assembly Components

    Item Description Spare part number (21) Hard drives (include hard drive bracket and connector) 5400-rpm, 60-GB 438526-001 4200-rpm, 40-GB 438525-001 Display assembly components Item Description Spare part number Display bezel 440706-001 Display Hinge Kit 400707-001 15.4-inch, WXGA, BrightView display panel 440711-001 Display inverter 441628-001...

  • Page 23: Plastics/Hardware Kit

    Plastics/Hardware Kit Item Description Spare part number Plastics/Hardware Kit 441630-001 PC Card slot bezel Hard drive cover (includes 2 captive screws, secured by C-clips) Memory/Mini PCI card module cover (includes 1 captive screw, secured by a C-clip) ENWW Plastics/Hardware Kit...

  • Page 24: Mass Storage Devices

    Mass storage devices Item Description Spare part number Hard drives (include frame and connector) 5400-rpm, 60-GB 438526-001 4200-rpm, 40-GB 438525-001 Optical drives (include bezel and bracket) DVD±RW/R and CD-RW Double-Layer Combo Drive 438524-001 DVD±RW and CD-RW Super Multi Double-Layer Combo Drive 438523-001 Chapter 4 Illustrated parts catalog ENWW...

  • Page 25: Miscellaneous Parts

    Miscellaneous parts Description Spare part number 65-watt AC adapter 418872-001 Power cords: Australia 350055-011 Brazil 350055-201 Denmark 350055-081 Europe 350055-021 French Canada 350055-DB1 Israel 350055-BB1 Italy 350055-061 Japan 350055-291 Korea 350055-AD1 People's Republic of China 350055-AA1 Switzerland 350055-BG1 The United Kingdom 350055-031 The United States 350055-001...

  • Page 26: Sequential Part Number Listing

    Sequential part number listing Spare part number Description 350055-001 Power cord use in the United States 350055-011 Power cord for use in Australia 350055-021 Power cord for use in Europe 350055-031 Power cord for use in the United Kingdom 350055-061 Power cord for use in Italy 350055-081 Power cord for use in Denmark...
  • Page 27 Spare part number Description 438531-051 Keyboard for use in France 438531-061 Keyboard for use in Italy 438531-071 Keyboard for use in Spain 438531-081 Keyboard for use in Denmark 438531-091 Keyboard for use in Norway 438531-131 Keyboard for use in Portugal 438531-141 Keyboard for use in Turkey 438531-151...
  • Page 28 Spare part number Description 440714-001 Display Screw Kit 440715-001 15.4-inch WXGA BrightView display assembly for use only with computer models without wireless LAN capability (includes wireless antenna transceivers and cables) 440716-001 15.4-inch WXGA BrightView display assembly for use only with computer models with wireless LAN capability 440717-001 Intel Pentium M 770 2.13-GHz processor (includes thermal paste)

  • Page 29: Removal And Replacement Procedures

    Removal and replacement procedures Preliminary replacement requirements Tools required You will need the following tools to complete the removal and replacement procedures: ● Magnetic screwdriver ● Phillips P0 and P1 screwdrivers ● Flat-bladed screwdriver Service considerations The following sections include some of the considerations that you should keep in mind during disassembly and assembly procedures.

  • Page 30: Drive Handling

    Drive handling CAUTION Drives are fragile components that must be handled with care. To prevent damage to the computer, damage to a drive, or loss of information, observe these precautions: Before removing or inserting a hard drive, shut down the computer. If you are unsure whether the computer is off or in hibernation, turn the computer on, and then shut it down through the operating system.
  • Page 31 The following table shows how humidity affects the electrostatic voltage levels generated by different activities. CAUTION A product can be degraded by as little as 700 V. Typical electrostatic voltage levels Relative humidity Event Walking across carpet 35,000 V 15,000 V 7,500 V Walking across vinyl floor 12,000 V...

  • Page 32: Packaging And Transporting Guidelines

    Packaging and transporting guidelines Follow these grounding guidelines when packaging and transporting equipment: ● To avoid hand contact, transport products in static-safe tubes, bags, or boxes. ● Protect ESD-sensitive parts and assemblies with conductive or approved containers or packaging. ● Keep ESD-sensitive parts in their containers until the parts arrive at static-free workstations.

  • Page 33: Equipment Guidelines

    Equipment guidelines Grounding equipment must include either a wrist strap or a foot strap at a grounded workstation. ● When seated, wear a wrist strap connected to a grounded system. Wrist straps are flexible straps with a minimum of one megohm ±10% resistance in the ground cords. To provide proper ground, wear a strap snugly against the skin at all times.

  • Page 34: Component Replacement Procedures

    Make special note of each screw and screw lock size and location during removal and replacement. Serial number Report the computer serial number to HP when requesting information or ordering spare parts. The serial number is located on the bottom of the computer. Chapter 5 Removal and replacement procedures...

  • Page 35: Battery

    Battery Description Spare part number 4-cell, 2.2-Ahr battery 440704-001 Before disassembling the computer, follow these steps: Shut down the computer. If you are unsure whether the computer is off or in hibernation, turn the computer on, and then shut it down through the operating system. Disconnect all external devices connected to the computer.

  • Page 36: Hard Drive

    Hard drive Description Spare part number 5400-rpm, 60-GB 438526-001 4200-rpm, 40-GB 438525-001 Before disassembling the computer, follow these steps: Shut down the computer. If you are unsure whether the computer is off or in hibernation, turn the computer on, and then shut it down through the operating system. Disconnect all external devices connected to the computer.
  • Page 37 Remove the hard drive (3) from the hard drive bay. If it is necessary to remove the hard drive bracket from the hard drive, remove the four Phillips PM3.0×3.0 hard drive bracket screws (1) from each side of the hard drive. Lift the bracket (2) straight up to remove it from the hard drive.

  • Page 38: Computer Feet

    Computer feet Description Spare part number Rubber Feet Kit 438557-001 The computer feet are adhesive-backed rubber pads. Memory module Description Spare part number 1-DIMM, PC2-4200, 512-MB 438546-001 1-DIMM, PC2-4200, 256-MB 438545-001 Before removing the memory module, follow these steps: Shut down the computer. If you are unsure whether the computer is off or in hibernation, turn the computer on, and then shut it down through the operating system.
  • Page 39 Lift the front edge of the cover (2) and swing it toward you. Remove the memory/Mini PCI card module compartment cover. NOTE The memory/Mini PCI card module compartment cover is included in the Plastics/ Hardware Kit, spare part number 441630-001 . Spread the retaining tabs (1) on each side of the memory module socket to release the memory module.

  • Page 40: Mini Pci Card Module

    Mini PCI card module Description Spare part number 802.11b/g Mini PCI card WLAN module for use in the MOW countries or regions listed below. 390501-001 Argentina Canada Mexico The United States Brazil Chile Taiwan 802.11b/g Mini PCI card WLAN module for use in the ROW countries or regions listed below. 390501-002 Australia Greece...
  • Page 41 Remove the Mini PCI card module: Disconnect the WLAN antenna cables (1) from the terminals on the WLAN module. NOTE The wireless antenna cables are available in the Wireless Antenna Kit, spare part number 441639-001. NOTE The black WLAN antenna cable is connected to the WLAN module “Main” terminal. The gray WLAN antenna cable is connected to the WLAN module “Aux”...

  • Page 42: Optical Drive

    Optical drive NOTE All optical drive spare part kits include an optical drive bezel and optical drive bracket. Description Spare part number DVD±RW and CD-RW Super Multi Double-Layer Combo Drive 438523-001 DVD±RW/R and CD-RW Double-Layer Combo Drive 438524-001 Before removing the optical drive, follow these steps: Shut down the computer.
  • Page 43 Remove the optical drive bracket (2). Reverse this procedure to reassemble and install the optical drive. ENWW Component replacement procedures...

  • Page 44: Switch Cover

    Switch cover Description Spare part number For use only with computer models with wireless LAN capability (includes wireless 441623-001 button and wireless light) For use only with computer models without wireless LAN capability 441624-001 Before removing the switch cover, follow these steps: Shut down the computer.
  • Page 45 Lift the rear edge of the switch cover and swing it forward. Remove the switch cover. Reverse this procedure to install the switch cover. ENWW Component replacement procedures...
  • Page 46 Keyboard Description Belgium 438531-A41 Portugal 438531-131 The Czech Republic 438531-221 Russia 438531-251 Denmark 438531-081 Saudi Arabia 438531-171 Europe 438531-021 Slovakia 438531-231 France 438531-051 Slovenia 438531-BA1 Germany 438531-041 South Africa 438531-AR1 Greece 438531-151 Spain 438531-061 Hungary 438531-211 Sweden and Finland 438531-B71 Israel 438531-BB1 Turkey...
  • Page 47 Remove the two Phillips PM2.0×9.0 screws that secure the keyboard to the computer. Turn the computer display-side up, with the front toward you. Open the computer as far as possible. Lift the rear edge of the keyboard and swing it toward you until it rests on the palm rest. ENWW Component replacement procedures...
  • Page 48 Release the zero insertion force (ZIF) connector (1) to which the keyboard cable is attached and disconnect the keyboard cable (2) from the system board. Remove the keyboard. Reverse this procedure to install the keyboard. Chapter 5 Removal and replacement procedures ENWW...

  • Page 49: Button Board

    Button board Description Spare part number Button board 441631-001 Before removing the button board, follow these steps: Shut down the computer. If you are unsure whether the computer is off or in hibernation, turn the computer on, and then shut it down through the operating system. Disconnect all external devices connected to the computer.

  • Page 50: Display Assembly

    Display assembly Description Spare part number 15.4-inch, WXGA BrightView display assembly for use only with computer models 440716-001 with wireless LAN capability (includes wireless antenna transceivers and cables) 15.4-inch, WXGA BrightView display assembly for use only with computer models 440715-001 without wireless LAN capability Before removing the display assembly, follow these steps: Shut down the computer.
  • Page 51 Disconnect the display cable connector (1) from the system board and remove the display cable (2) from the clips and routing channel built into the top cover. Remove the wireless antenna cables (3) from the clips and routing channel built into the top cover. Remove the two Phillips PM2.0×9.0 screws (4) that secure the display assembly to the computer.
  • Page 52 If it is necessary to replace any of the display assembly internal subcomponents, remove the following display bezel screw covers and screws: (1) Four round rubber screw covers on the top edge of the display bezel (2) Four flat rubber screw covers on the bottom edge of the display bezel (3) Eight Phillips PM2.5×6.0 screws NOTE The display bezel screw covers are available in the Display Screw Cover Kit, spare...
  • Page 53 If it is necessary to replace the display inverter, disconnect the display panel cable (1) and the backlight cable (2) from the inverter. Remove the display inverter (3). NOTE The display inverter is available using spare part number 441628-001. If it is necessary to replace the display panel, remove the four Phillips PM2.5×6.0 screws (1) that secure the panel to the display enclosure.
  • Page 54 Remove the display hinges (2). NOTE The display hinges are available in the Display Hinge Kit, spare part number 440707-001. If it is necessary to replace the wireless antenna transceivers, remove the Phillips PM2.5×4.0 screws (1) that secure each transceiver (2) to the display enclosure. NOTE The wireless antenna transceivers are also attached to the display enclosure with a thin layer of adhesive.

  • Page 55: Base Enclosure

    Base enclosure Description Spare part number Base enclosure 441625-001 Before removing the base enclosure, follow these steps: Shut down the computer. If you are unsure whether the computer is off or in hibernation, turn the computer on, and then shut it down through the operating system. Disconnect all external devices connected to the computer.
  • Page 56 Remove the two Phillips PM2.0×3.0 screws (1) and the twelve Phillips PM2.0×9.0 screws (2) that secure the base enclosure to the computer. Lift the left side of the base enclosure (1) until the USB connectors (2) disengage from their openings in the base enclosure. Remove the base enclosure.

  • Page 57: Rtc Battery

    RTC battery Description Spare part number RTC battery 438556-001 Before removing the RTC battery, follow these steps: Shut down the computer. If you are unsure whether the computer is off or in hibernation, turn the computer on, and then shut it down through the operating system. Disconnect all external devices connected to the computer.

  • Page 58: Fan Assembly

    Fan assembly Description Spare part number Fan assembly 438528-001 Before removing the fan assembly, follow these steps: Shut down the computer. If you are unsure whether the computer is off or in hibernation, turn the computer on, and then shut it down through the operating system. Disconnect all external devices connected to the computer.

  • Page 59: Heat Sink

    Reverse this procedure to install the fan assembly. NOTE To properly ventilate the computer, allow at least a 7.6-cm (3-inch) clearance on the left and right sides of the computer. The computer uses an electric fan for ventilation. The fan is controlled by a temperature sensor and is designed to turn on automatically when high temperature conditions exist.
  • Page 60 Lift the left side of the heat sink (3) and remove it. NOTE The thermal paste should be thoroughly cleaned from the surfaces of the processor (1) and heat sink (2) each time the heat sink is removed. Thermal paste is included with all heat sink and processor spare part kits.
  • Page 61 Processor NOTE All processor spare part kits include thermal paste. Description Spare part number Intel Pentium M 770 2.13-GHz processor 440717-001 Intel Celeron M 360 1.40-GHz processor 438554-001 Before removing the processor, follow these steps: Shut down the computer. If you are unsure whether the computer is off or in hibernation, turn the computer on, and then shut it down through the operating system.
  • Page 62 Lift the processor (2) straight up and remove it. NOTE The gold triangle (3) on the processor should be aligned with the triangle (4) embossed on the processor socket when you install the processor. Reverse this procedure to install the processor. Speaker Description Spare part number...
  • Page 63 Remove the speaker: Disconnect the speaker cable (1) from the system board. Remove the Phillips PM2.0×9.0 screw (2) that secures the speaker to the top cover. Remove the speaker (3). Reverse this procedure to install the speaker. ENWW Component replacement procedures...

  • Page 64: System Board

    System board Description Spare part number For use only with full-featured computer models 441635-001 For use only with defeatured computer models with wireless LAN capability 441636-001 For use only with defeatured computer models without wireless LAN capability 441637-001 When replacing the system board, be sure that the following components are removed from the defective system board and installed on the replacement system board: ●...
  • Page 65 Remove the system board: Remove the Phillips PM2.0×3.0 screw that secures the system board to the top cover . Lift the left side of the system board (1) until it rests at an angle. Flex the right side of the top cover (2) until the external monitor connector clears the opening in the top cover.
  • Page 66 If it is necessary to replace the optical drive connector board, pull the board away from the system board until it disconnects from the system board. NOTE The optical drive connector board is available using spare part number 441631-001. Reverse this procedure to install the system board. Chapter 5 Removal and replacement procedures ENWW...

  • Page 67: Pc Card Assembly

    PC Card assembly Description Spare part number PC Card assembly 438551-001 PC Card slot bezel 438527-001 Before removing the PC Card assembly, follow these steps: Shut down the computer. If you are unsure whether the computer is off or in hibernation, turn the computer on, and then shut it down through the operating system.
  • Page 68 Remove the two Phillips PM2.0×3.0 screws that secure the PC Card assembly to the system board. Turn the system board top-side up, with the PC Card eject button toward you. Disengage the slots on the PC Card assembly from the tabs (1) on the PC Card connector. Remove the PC Card assembly (2) from the system board.

  • Page 69: Touchpad Cable

    TouchPad cable Description Spare part number TouchPad cable 441638-001 Before removing the TouchPad cable, follow these steps: Shut down the computer. If you are unsure whether the computer is off or in hibernation, turn the computer on, and then shut it down through the operating system. Disconnect all external devices connected to the computer.
  • Page 70 Release the ZIF connector (1) to which the TouchPad cable is connected and disconnect the TouchPad cable (2) from the TouchPad board. Reverse this procedure to install the TouchPad cable. Chapter 5 Removal and replacement procedures ENWW...

  • Page 71: Computer Setup

    Computer Setup WARNING! Only authorized technicians trained by HP should repair this equipment. All troubleshooting and repair procedures are detailed to allow repair at only the subassembly or module level. Because of the complexity of the individual boards and subassemblies, do not attempt to make repairs at the component level or modifications to any printed wiring board.

  • Page 72: Computer Setup Defaults

    In Computer Setup, the following shortcuts are available: ● To change the language, press f2. ● To view navigation information, press f1. ● To close open dialog boxes and return to the main Computer Setup screen esc. Select the Files, Security, Diagnostics, or System Configuration menu. To exit Computer Setup, choose one of the following methods: ●...

  • Page 73: Computer Setup Menus

    Computer Setup menus The menu tables in this section provide an overview of Computer Setup options. NOTE Some of the Computer Setup menu items listed in this chapter may not be supported by your computer. File Menu Select To Do This ●...

  • Page 74: Diagnostics Menu

    Select To Do This System IDs Enter user-defined computer asset and ownership tag. Disk Sanitizer Run Disk Sanitizer to destroy all existing data on the primary hard drive. The following options are available: ● Fast: Runs the Disk Sanitizer erase cycle once. ●...
  • Page 75 Select To Do This port to the computer or to an optional docking device (select models only). ● Automatic/disable Intel SpeedStep Technology. ● Select a parallel port mode: EPP (Enhanced Parallel Port), standard, bidirectional, or ECP (Enhanced Capabilities Port). ● Enable/disable BIOS DMA data transfers (select models only) ●...

  • Page 76: Specifications

    Specifications Computer specifications Metric U.S. Dimensions Height (front to back) 3.19 to 3.59 cm 1.26 to 1.41 in Width 35.79 cm 14.09 in Depth 25.70 cm 10.12 in Weight (with optical drive, hard drive, and battery) 2.67 kg 5.88 lbs Input power Operating voltage 18.5 V dc @ 3.5 A –...
  • Page 77 Metric U.S. Nonoperating 1.50 g zero-to-peak, 10 Hz to 500 Hz, 0.5 oct/min sweep rate NOTE Applicable product safety standards specify thermal limits for plastic surfaces. The computer operates well within this range of temperatures. 15.4-inch, WXGA display specifications Metric U.S.

  • Page 78: Hard Drive Specifications

    Hard drive specifications 60-GB* 40-GB* Dimensions Height 9.5 mm 9.5 mm Width 70 mm 70 mm Weight 101 g 101 g Interface type ATA-7 ATA-7 Transfer rate Synchronous (maximum) 100 MB/sec 100 MB/sec Security ATA security ATA security Seek times (typical read, including setting) Single track 3 ms 3 ms...
  • Page 79 Primary 4-cell, Li-ion battery specifications Metric U.S. Dimensions Height 2.00 cm 0.79 in Width 26.80 cm 3.70 in Depth 5.30 cm 5.28 in Weight 0.34 kg 0.75 lb Energy Voltage 14.4 V Amp-hour capacity 2.2 Ah Watt-hour capacity 32 Wh Temperature Operating 5°C to 45°C...

  • Page 80: Drive Specifications

    DVD±RW and CD-RW Super Multi Double-Layer Combo Drive specifications Applicable disc Read: Write: CD-DA, CD+(E)G, CD-MIDI, CD-TEXT, CD-R and CD-RW CD-ROM, CD-ROM XA, MIXED MODE DVD+R, DVD+RW, DVD-R, DVD-RW, CD, CD-I, CD-I Bridge (Photo-CD, Video DVD-RAM CD), Multisession CD (Photo-CD, CD- EXTRA, Portfolio, CD-R, CD-RW), CD- R, CD-RW, DVD-ROM (DVD-5, DVD-9, DVD-10, DVD-18), DVD-R, DVD-RW,...
  • Page 81 DVD±RW/R and CD-RW Double-Layer Combo Drive specifications Applicable disc Read: Write: CD-DA, CD+(E)G, CD-MIDI, CD-TEXT, CD-R and CD-RW CD-ROM, CD-ROM XA, MIXED MODE CD, CD-I, CD-I Bridge (Photo-CD, Video CD), Multisession CD (Photo-CD, CD- EXTRA, Portfolio, CD-R, CD-RW), CD- R, CD-RW, DVD-ROM (DVD-5, DVD-9, DVD-10, DVD-18), DVD-R, DVD-RW, DVD+R, DVD+RW, DVD-RAM Center hole diameter...

  • Page 82: System Dma Specifications

    System DMA specifications Hardware DMA System function DMA0 Not applicable DMA1* Not applicable DMA2* Not applicable DMA3 Not applicable DMA4 Direct memory access controller DMA5* Available for PC Card DMA6 Not assigned DMA7 Not assigned *PC Card controller can use DMA 1, 2, or 5. Chapter 7 Specifications ENWW...

  • Page 83: System Interrupt Specifications

    System interrupt specifications Hardware IRQ System function IRQ0 System timer IRQ1 Standard 101-/102-Key or Microsoft® Natural Keyboard IRQ2 Cascaded IRQ3 Intel 82801DB/DBM USB2 Enhanced Host Controller—24CD IRQ4 COM1 IRQ5* Conexant AC—Link Audio Intel 82801DB/DBM SMBus Controller—24C3 Data Fax Modem with SmartCP IRQ6 Diskette drive IRQ7*...
  • Page 84 System I/O address specifications I/O address (hex) System function (shipping configuration) 000 - 00F DMA controller no. 1 010 - 01F Unused 020 - 021 Interrupt controller no. 1 022 - 024 Opti chipset configuration registers 025 - 03F Unused 02E - 02F 87334 “Super I/O”...
  • Page 85 I/O address (hex) System function (shipping configuration) 220 - 22F Entertainment audio 230 - 26D Unused 26E - 26 Unused 278 - 27F Unused 280 - 2AB Unused 2A0 - 2A7 Unused 2A8 - 2E7 Unused 2E8 - 2EF Reserved serial port 2F0 - 2F7 Unused 2F8 - 2FF...

  • Page 86: System Memory Map Specifications

    System memory map specifications Size Memory address System function 640 KB 00000000-0009FFFF Base memory 128 KB 000A0000-000BFFFF Video memory 48 KB 000C0000-000CBFFF Video BIOS 160 KB 000C8000-000E7FFF Unused 64 KB 000E8000-000FFFFF System BIOS 15 MB 00100000-00FFFFFF Extended memory 58 MB 04800000-07FFFFFF Super extended memory 58 MB...

  • Page 87: 8 Screw Listing

    Screw listing This section provides specification and reference information for the screws and screw locks used in the computer. All screws and screw locks listed in this section are available in the Screw Kit, spare part number 441629-001, and the Display Screw Kit, spare part number 440714-001. ENWW...
  • Page 88 Phillips PM2.5×6.0 captive screw Color Quantity Length Thread Head width Black 6.0 mm 2.5 mm 5.0 mm Where used: (1) Two screws that secure the hard drive cover to the computer (screws are captured on the cover by C-clips; see Hard drive on page (2) One screw that secures the memory/Mini PCI card module compartment cover to the computer (screw is captured on the cover by a C-clip;...
  • Page 89 Phillips PM3.0×3.0 screw Color Quantity Length Thread Head width Silver 3.0 mm 3.0 mm 5.0 mm Where used: 4 screws that secure the hard drive bracket to the hard drive (see Hard drive on page ENWW Phillips PM3.0×3.0 screw...
  • Page 90 Phillips PM2.0×9.0 screw Color Quantity Length Thread Head width Black 9.0 mm 2.0 mm 5.0 mm Where used: (1) One screw that secures the optical drive to the computer (see Optical drive on page (2) Two screws that secure the keyboard to the computer (see Keyboard on page Where used: 7 screws that secure the switch cover to the computer (see Switch cover on page...
  • Page 91 Where used: 2 screws that secure the display assembly to the computer (see Display assembly on page Where used: 12 screws that secure the base enclosure to the computer (see Base enclosure on page ENWW Phillips PM2.0×9.0 screw...
  • Page 92 Where used: (1) One screw that secures the fan assembly to the computer (see Fan assembly on page (2) One screw that secures the speaker to the computer (see Speaker on page Chapter 8 Screw listing ENWW...
  • Page 93 Phillips PM2.0×3.0 screw Color Quantity Length Thread Head width Silver 3.0 mm 2.0 mm 4.5 mm Where used: 2 screws that secure the optical drive bracket to the optical drive (see Optical drive on page Where used: One screw that secures the button board to the computer (see Button board on page ENWW...
  • Page 94 Where used: 4 screws that secure each display hinge to the display panel (see Display assembly on page Where used: 2 screws that secure the base enclosure to the top cover (see Base enclosure on page Where used: One screw that secures the system board to the base enclosure (see System board on page Chapter 8 Screw listing...
  • Page 95 Where used: 2 screws that secure the PC Card assembly to the system board (see PC Card assembly on page ENWW Phillips PM2.0×3.0 screw...
  • Page 96 Phillips PM2.0×2.0 screw Color Quantity Length Thread Head width Black 2.0 mm 2.0 mm 7.0 mm Where used: 4 screws that secure the switch cover to the computer (see Switch cover on page Chapter 8 Screw listing ENWW...
  • Page 97 Phillips PM2.0×7.0 screw Color Quantity Length Thread Head width Black 7.0 mm 2.0 mm 5.0 mm Where used: 2 screws that secure the display assembly to the computer (see Display assembly on page ENWW Phillips PM2.0×7.0 screw...
  • Page 98 Phillips PM2.5×6.0 screw Color Quantity Length Thread Head width Silver 6.0 mm 2.5 mm 5.0 mm Where used: 8 screws that secure the display bezel to the display assembly (see Display assembly on page Where used: 4 screws that secure the display panel to the display enclosure (see Display assembly on page Chapter 8 Screw listing...
  • Page 99 Where used: 4 screws that secure the heat sink to the base enclosure (see Heat sink on page ENWW Phillips PM2.5×6.0 screw...
  • Page 100 Phillips PM2.5×4.0 screw Color Quantity Length Thread Head width Silver 4.0 mm 2.5 mm 5.0 mm Where used: 2 screws that secure the wireless antenna transceivers to the display enclosure (see Display assembly on page Chapter 8 Screw listing ENWW...

  • Page 101: Backup And Recovery

    Backup and recovery Backup HP Backup and Recovery Manager provides several ways to back up the system and to recover optimal system functionality. NOTE HP installed drivers, utilities, and applications can be copied to a CD or to a DVD using HP Backup and Recovery Manager.

  • Page 102: Backing Up The Entire Hard Drive

    To back up your entire hard drive: Select Start > All Programs > HP Backup & Recovery > HP Backup and Recovery Manager. Click Next. Click Back up to protect system settings and important data files, and then click Next.

  • Page 103: Backing Up Modifications Made To The System

    To create and schedule a system recovery point: Select Start > All Programs > HP Backup & Recovery > HP Backup and Recovery Manager. Click Next. Click Back up to protect system settings and important data files, and then click Next.

  • Page 104: Creating Recovery Discs (Highly Recommended)

    To create a set of recovery discs: Select Start > All Programs > HP Backup & Recovery > HP Backup and Recovery Manager. Click Next. Click Create factory software recovery CDs or DVDs to recover the system (Highly recommended), and then click Next.

  • Page 105: Performing A Recovery

    To initiate a recovery in Windows, follow these steps: Back up all personal files. Select Start > All Programs > HP Backup & Recovery > HP Backup and Recovery Manager. Click Next. Click Recover important files or the entire system, and then click Next.

  • Page 106: 10 Connector Pin Assignments

    10 Connector pin assignments Audio-out (headphone) Signal Audio out, left channel Audio out, right channel Ground Audio-in (microphone) Signal Audio signal in Audio signal in Ground 100 Chapter 10 Connector pin assignments ENWW...

  • Page 107: External Monitor

    External monitor Signal Red analog Green analog Blue analog Not connected Ground Ground analog Ground analog Ground analog +5 VDC Ground Monitor detect DDC 2B data Horizontal sync Vertical sync DDC 2B clock ENWW External monitor 101...

  • Page 108: Modem)

    RJ-11 (modem) Signal Unused Ring Unused Unused Unused RJ-45 (network) Signal Transmit + Transmit - Receive + Unused Unused Receive - Unused Unused 102 Chapter 10 Connector pin assignments ENWW...

  • Page 109: Universal Serial Bus

    Universal Serial Bus Signal +5 VDC Data - Data + Ground ENWW Universal Serial Bus 103...

  • Page 110: 11 Power Cord Set Requirements

    11 Power cord set requirements The wide range input feature of the computer permits it to operate from any line voltage from 100 to 120 volts AC or from 220 to 240 volts AC. The 3-conductor power cord set included with the computer meets the requirements for use in the country or region where the equipment is purchased.

  • Page 111: Requirements For Specific Countries Or Regions

    Requirements for specific countries or regions Region Accredited agency Applicable note number Australia EANSW Austria Belgium CEBC Canada Denmark DEMKO Finland FIMKO France Germany Italy Japan METI Korea The Netherlands KEMA Norway NEMKO The People's Republic of China Sweden SEMKO Switzerland Taiwan BSMI...

  • Page 112: 12 Recycling

    12 Recycling Battery When a battery has reached the end of its useful life, do not dispose of the battery in general household waste. Follow the local laws and regulations in your area for computer battery disposal. 106 Chapter 12 Recycling ENWW...

  • Page 113: Display

    NOTE Materials Disposal. This HP product contains mercury in the backlight in the display assembly that might require special handling at end-of-life. Disposal of mercury may be regulated because of environmental considerations. For disposal or recycling information, contact your local authorities, or see the Electronic Industries Alliance (EIA) Web site at http://www.eiae.org.
  • Page 114 Perform the following steps to disassemble the display assembly: Remove all screw covers (1) and screws (2) that secure the display bezel to the display assembly. Lift up and out on the left and right inside edges (1) and the top and bottom inside edges (2) of the display bezel until the bezel disengages from the display assembly.
  • Page 115 Disconnect all display panel cables (1) from the display inverter and remove the inverter (2). Remove all screws (1) that secure the display panel assembly to the display enclosure. Remove the display panel assembly (2) from the display enclosure. Turn the display panel assembly upside down. Remove all screws that secure the display panel frame to the display panel.
  • Page 116 Remove the display panel frame (2) from the display panel. Remove the screws (1) that secure the backlight cover to the display panel. Lift the top edge of the backlight cover (2) and swing it outward. Remove the backlight cover. Turn the display panel right-side up.
  • Page 117 Remove the backlight cables (1) from the clip (2) in the display panel. Turn the display panel upside down. Remove the backlight frame from the display panel. WARNING! The backlight contains mercury. Exercise caution when removing and handling the backlight to avoid damaging this component and causing exposure to the mercury.
  • Page 118 Remove the backlight from the backlight frame. Disconnect the display cable (1) from the LCD panel. Remove the screws (2) that secure the LCD panel to the display rear panel. Release the LCD panel (3) from the display rear panel. Release the tape (4) that secures the LCD panel to the display rear panel.

  • Page 119: Index

    Index button board RJ-11 102 AC adapter, spare part removal 43 RJ-45 102 number 19, 20 spare part number 14, 22, Universal Serial Bus antennae (USB) 103 disconnecting 35 connectors, service illustrated 16 considerations 23 cables, service considerations 23 location 7 caps lock light 6 spare part number 16 chipset, product description 1...
  • Page 120 removal 47 feet spare part number 16, 22, locations 32 keyboard spare part number 15, 21, product description 2 Display Label Kit, spare part removal 40 number 21 File menu 67 spare part numbers 14, 20, display panel front components 4, 7 illustrated 16 function keys 5 keyboard components 5...
  • Page 121 monitor port power button 6 RJ-45 jack location 9 power connector 9 location 9 pin assignments 101 power cord pin assignments 102 set requirements 104 RTC battery spare part numbers 19, 20 removal 51 network jack power light 6 spare part number 15, 21, location 9 power requirements, product pin assignments 102...
  • Page 122 optical drive 74, 75 removal 48 system DMA 76 spare part number 16, 22, SpeedStep Technology 69 static-shielding materials 27 wireless button 6 switch cover wireless light 6 removal 38 wireless, product description 2 spare part numbers 14, 22, workstation guidelines 26 system board removal 58 spare part numbers 15, 22,...

Table of Contents