Yamaha QL1 Supplementary Manual
Digital mixing console
Hide thumbs
Also See for QL1:
- Service manual (367 pages) ,
- Reference manual (294 pages) ,
- Manual (100 pages)
Related Manuals for Yamaha QL1
Summary of Contents for Yamaha QL1
- Page 1 V3.1 Supplementary Manual This supplementary manual explains mainly the functions that have been added or changed in QL5/QL1 firmware V3.1. Use it in conjunction with the QL5/QL1 V3 Owner's Manual and Reference Manual.
- Page 2 Contents Contents Input channels ................Added pan function (Monaural input channels only) ..........Changing input signal processing when setting LR-MONO (Stereo input channels only) ................. I/O Devices window ..............Added supported devices ..................Added third-party equipment’s HA control function ..........Setup window ................
- Page 3 Input channels Input channels Added pan function (Monaural input channels only) The pan setting for signals sent to the STEREO bus enables you to select PAN LAW settings. You can select one of the following: The pan level is nominal at center and +3dB when panned 100% CENTER NOMINAL either left or right.
- Page 4 PAN LAW is set to LR NOMINAL. MONO (Stereo input channels only) • TO STEREO/MONO window (CH1–32, CH33–64/ST IN (QL5), ST IN (QL1)) In order to ensure the appropriate level, the signal processing regarding the LR-MONO setting has been changed as follows.
- Page 5 I/O Devices window I/O Devices window SLOT 1 - 4 LOCK indicators This indicates the word clock status for slots 1 to 4. If the word clock is operating normally, this indicator will be green. Added supported devices There is no card in the slot. Or, an unsupported card is in the slot. The RSio64-D is now supported.
- Page 6 I/O Devices window • WORD CLOCK SLOT1 1/2 indicator USER PATTERN button Press this button to open the window for setting the audio routing user pattern in the • WORD CLOCK DANTE indicator RSio64-D. Patch to the desired output ports of the slots and Dante. Indicates the word clock source status for the RSio64-D.
- Page 7 I/O Devices window Added third-party equipment’s HA control NOTE The indicator on the right side of the rack indicates the control status of the device. function It is now possible to control supported third-party equipment’s head amps (HA) from the console.
- Page 8 Setup window Setup window • DCA 1 - 8 cue • DCA 1 - 8 DCA MUTE TARGET (DCA group mute targets) NOTE Added functions for cascade connections Even if the cue mode is LAST CUE, the cue for the target DCA will come on at the same time for consoles linked by cascade connections.
- Page 9 Setup window CASCADE window (CASCADE IN ATT page) ATT knobs Display the attenuator values (-96.0dB to 0.0dB) for cascade input signals. You can adjust these values using multifunction knobs 1 - 8 in the Centralogic section or the [TOUCH AND TURN] knob. NOTE You can use these knobs as SUB IN with adjustable input level.
- Page 10 Channel job Channel job GLOBAL RECALL SAFE window The following parameters have been added. CASCADE IN CASCADE IN PATCH and CASCADE IN ATT settings Added parameters to Recall Safe function CASCADE OUT CASCADE OUT PATCH settings Parameters that can be excluded from recall operations have been added. RECALL SAFE MODE window CASCADE IN and CASCADE OUT have been added to the GLOBAL RECALL SAFE field.
- Page 11 Scene memory Scene memory Added parameters to Focus Recall function Parameters that can be set in the Focus Recall operations have been added. Additional parameters are the same as those in the Recall Safe function. Added parameters to Global Paste function CASCADE IN and CASCADE OUT have been added as parameters that can be selected for the Global Paste function.
- Page 12 SAVE/LOAD window SAVE/LOAD window Added remount function to USB flash drives If USB flash drive is not mounted, the FORMAT button will become a USB REMOUNT button. Press this button to mount a USB flash drive. Use this button if a USB flash drive is not recognized after it has been removed and reinserted.
- Page 13 Dante Firmware Update Manager. Changed update procedure for NAME SUB CPU If the following window is displayed, the console has entered the mode for updating the Dante module firmware. For details about this operation, refer to the “QL5/QL1 Firmware Update firmware Guide” .
- Page 14 Yamaha Pro Audio Global Web Site http://www.yamahaproaudio.com/ Yamaha Manual Library http://www.yamaha.co.jp/manual/ Manual Development Department © 2015 Yamaha Corporation Published 07/2015 MA-A0...