Table of Contents
Advertisement
Quick Links
CL/QL series V4.1 Supplementary Manual
This supplementary manual explains mainly the functions that have been added or changed in CL5/CL3/CL1 and QL5/
QL1 firmware V4.1.
Use it in conjunction with the CL5/CL3/CL1 and QL5/QL1 V4 Owner's Manual and Reference Manual.
CL/QL Editor V4.1 Supplementary Manual
This supplementary manual explains mainly the functions that have been added or changed in CL/QL Editor V4.1.
NOTE
• The explanations in this supplementary manual will use the CL5.
• In the case of the CL3/CL1 or QL5/QL1, some screens will not show channels and faders that do not exist on those models.
EN
Advertisement
Table of Contents
Related Manuals for Yamaha CL Series
Summary of Contents for Yamaha CL Series
- Page 1 CL/QL series V4.1 Supplementary Manual This supplementary manual explains mainly the functions that have been added or changed in CL5/CL3/CL1 and QL5/ QL1 firmware V4.1. Use it in conjunction with the CL5/CL3/CL1 and QL5/QL1 V4 Owner’s Manual and Reference Manual. CL/QL Editor V4.1 Supplementary Manual This supplementary manual explains mainly the functions that have been added or changed in CL/QL Editor V4.1.
-
Page 2: Table Of Contents
Contents Contents Support for Shure AXT400, QLXD4 and ULXD4......Selected Channel section (QL series only) ......4-band EQ band selection..................Input and output patching............. Added functions to display channel name and effect type in the PATCH/NAME window, CH SELECT window, and PORT SELECT window......Input/Output channels ............ -
Page 3: Support For Shure Axt400, Qlxd4 And Ulxd4
“DHCP.” are set to YAMAHA ID mode. Note that if a greater number of devices is connected, some of the If you are using a fixed IP address, set the CL/QL console to STATIC IP. In this case, set the devices will not be recognized by the console based on the order in which their power is turned IP address for the Shure device and the IP address in “FOR DEVICE CONTROL”... - Page 4 Support for Shure AXT400, QLXD4 and ULXD4 DEVICE SELECT window (when DEVICE LIST is displayed) DEVICE SELECT window (when SUPPORTED DEVICE is displayed) NOTE If a device has the DEVICE IDENTIFY function, the DEVICE IDENTIFY button is enabled. I/O device indication (for devices that do not feature Dante output) Otherwise, this button will be grayed out and cannot be pressed.
- Page 5 For Shure QLXD4/ULXD4 Indicates the gain value for the transmitter. Refer to “Remotely controlling WIRELESS unit” in the CL series or QL series Reference Channel name (receiver) Manual. Indicates the channel name that is set on the receiver. NOTE Frequency For QLXD4, the MUTE button is not displayed.
- Page 6 Sets the gain for the receiver. To adjust the value, press the knob to select it, and use the multifunction knobs (for CL series consoles) or the TOUCH AND TURN knob (for CL/QL series consoles). The level meter located at the immediate right of the knob indicates the input level.
- Page 7 Support for Shure AXT400, QLXD4 and ULXD4 This section explains how to control Shure wireless mics that do not output Dante Access the GAIN/PATCH window. signals. Example: Connecting the output of an AXT400 to OMNI 1 on a CL console, and assigning the signal to input channel 1.
- Page 8 Indicates the frequency that is currently set for the RF signal. TX.GAIN knob Sets the gain for the transmitter. To adjust the value, press the knob to select it, and use the multifunction knobs (for CL series consoles) or the TOUCH AND TURN knob (for CL/ QL series consoles). NOTE •...
- Page 9 Sets each gain for the transmitter. To adjust the value, press the knob to select it, and use the multifunction knobs (for CL series consoles) or the TOUCH AND TURN knob (for CL/QL series consoles). The level meter located at the immediate right of the knob indicates the input level.
- Page 10 Support for Shure AXT400, QLXD4 and ULXD4 GAIN/PATCH window (1-48, 49-72/ST IN (CL5), 49-64/ST IN SELECTED CHANNEL window (CL3), ST IN (CL1)) and OVERVIEW window For Shure AXT400 / QLXD4/ULXD4 For Shure AXT400 / QLXD4/ULXD4 TX.GAIN knob (for AXT400) RX.GAIN knob (for QLXD4/ULXD4) TX.GAIN knob (for AXT400) NOTE...
-
Page 11: Selected Channel Section (Ql Series Only)
Selected Channel section (QL series only) Selected Channel section (QL series only) 4-band EQ band selection Selections of the EQ [LOW] key/EQ [LOW-MID] key/EQ [HIGH-MID] key/EQ [HIGH] key on the top panel and band selections on the touch screen are now linked. V4.1 Supplementary Manual... -
Page 12: Input And Output Patching
Input and output patching Input and output patching Added functions to display channel name and effect type in the PATCH/NAME window, CH SELECT window, and PORT SELECT window. The channel name and effect type are now displayed below the channel select buttons and port select buttons in the PATCH/NAME window, CH SELECT window, and PORT SELECT window. -
Page 13: Input/Output Channels
Input/Output channels Input/Output channels Color name display In the PATCH/NAME window (when the ICON tab is selected), color names are now displayed on the channel color select buttons. V4.1 Supplementary Manual... -
Page 14: Eq And Dynamics
Press this button to open the GLOBAL EQ TYPE popup window, where you can set the atmosphere of the original sound. EQ type and channel category. This is the standard EQ type found in classic Yamaha digital mixers, such as the PM1D and the PM5D. LEGACY... -
Page 15: Hpf/Eq Window (1Ch)
’ console s top panel. • For CL series consoles, this operation is not possible with the multifunction knobs in the LOW band Centralogic section. It is also not possible with USER DEFINED knobs that have been assigned • When set to PEQ (Q=0.10), press in and turn the Q knob to the right to switch to shelving to the TOUCH AND TURN function. -
Page 16: Meters
Meters Meters Added functions in the RTA display window (RTA METER window, HPF/EQ window, GEQ window, 8BandPEQ window) The visibility of frequency analysis displays has been improved with the addition of a scale change and offset gain, and the addition of PEAK HOLD. Offset gain (RTA METER window, HPF/EQ window, GEQ window, 8BandPEQ window) If a frequency is at a low level, its analysis results might not appear clearly in a graph. -
Page 17: I/O Devices And External Head Amps
I/O devices and external head amps I/O devices and external head amps I/O DEVICE [OUTPUT PATCH] window Support for the AES67 standard for audio networking interoperability The AES67 standard for interoperability through the use of audio-over-IP technology is now supported. This allows the CL/QL console and R series to establish an audio connection with audio networks that support AES67, such as “Ravenna.”... -
Page 18: I/O Device Window (I/O Page)
Setup I/O DEVICE window (I/O page) Setup RSio64-D display Added supported devices If the card’s internal sampling rate converter function is enabled when an MY8-AE96S mini- YGDAI card is inserted into the RSio64-D, the display will appear as shown below. The following devices are now supported: Audinate Dante-MY16-AUD2;... - Page 19 Setup V4.1 Supplementary Manual...
-
Page 20: Dante Device Lock
Setup Dante Device Lock If a device connected to the console is online, and Dante Device Lock is enabled for that device, the LOCKED indicator will appear in each window as shown below. The CL/QL console and R series now support Dante Device Lock. Its status is displayed on CL/QL. -
Page 21: Added Functions In The Network Window
Setup Added functions in the NETWORK window If you select DHCP or AUTO IP, the window will appear as shown below and you will be unable to set the IP ADDRESS, SUBNET MASK, and GATE WAY ADDRESS. NETWORK window (FOR DEVICE CONTROL page) Use this window to set the console’s IP address, in order to use the Dante PRIMARY connector on the rear panel to remote-control external devices. -
Page 22: Alert Message Display
Setup NETWORK window (FOR MIXER CONTROL page) Alert message display Use this window to set the console’s IP address, in order to use the NETWORK connector on If the Dante network is not connecting at gigabit speeds, a message is now displayed at the the rear panel to remote-control the console from CL Editor/QL Editor, StageMix, or the bottom of the LCD. -
Page 23: Cl/Ql Editor V4.1 Supplementary Manual
CL/QL Editor V4.1 Supplementary Manual CL/QL Editor V4.1 Supplementary Manual Added specifications for the CSV file read function The number of synonyms and abbreviations that can be used when creating a CSV file have Reading and Writing CSV files been increased. Channel color notation Added option for writing CSV files Original notation... - Page 24 Reading and Writing CSV files Channel icon notation Original notation Notation when reading a CSV file Original notation Notation when reading a CSV file Wireless WirelessMic, W/L, W.L Kick BassDrum, B.Dr, BD, B.D Podium Speech, Lecture Snare Sn, S.Dr, Botm, Botom Wedge Foot, Flor, Floor Hi-Hat...
- Page 25 Reading and Writing CSV files Port name notation for input patches and output patches Additional notation when reading a CSV file Original notation Original notation * Underlined words can be omitted. (Normal format) (Short format) Additional notation when reading a CSV file * [n] indicates a number (such as a channel number).
-
Page 26: Support For Devices That Do Not Feature Dante Output
Support for devices that do not feature Dante output Support for devices that do not feature Additional notation when reading a CSV file Original notation Original notation * Underlined words can be omitted. Dante output (Normal format) (Short format) * [n] indicates a number (such as a channel number). Insert2 Input Channel [n] INS2 CH [n] IC2 [n]... - Page 27 Support for devices that do not feature Dante output Overview window (INPUT CH window) When the receiver is off The HA display appears as shown below. AXT400 display When the receiver is on and connected via a ShowLink® remote control The RF level is shown for two channels (A and B).
- Page 28 Yamaha Pro Audio global website http://www.yamahaproaudio.com/ Yamaha Downloads http://download.yamaha.com/ Manual Development Group © 2016 Yamaha Corporation Published 12/2016 MA-A0...