Table of Contents
Advertisement
24-Port 10/100 + 2-Port Gigabit Switch with Webview and Power over Ethernet
IP Port
You can also map network applications to Class of Service values based on the IP port number (i.e., TCP/UDP port
number) in the frame header. Some of the more common TCP service ports include: HTTP: 80, FTP: 21, Telnet: 23
and POP3: 110.
IP Port Priority Status. Enables or disables the IP port priority.
IP Port Priority Table. Shows the IP port to CoS map.
IP Port Number (TCP/UDP). Set a new IP port number, such as HTTP: 80, FTP: 21, Telnet: 23 and POP3: 110.
Class of Service Value. Sets a CoS value for a new IP port. Note that "0" represents low priority and "7"
Figure 5-29: QoS - IP Port
represent high priority.
Set IP Port Priority Status to Enabled by checking the IP Port Priority Global Status checkbox.
Enter the port number for a network application in the IP Port Number box and the new CoS value in the Class of
Service box.
Click Submit to save the changes.
To remove an IP Port Priority, select the priority to be removed from the table and click Remove IP Port.
47
Chapter 5: Configuring the Switch through the Web Utility
QoS
Hide quick links:
Advertisement
Table of Contents
