Appendix; Using The Rom Monitor; Entering The Rom Monitor Mode; Recovering Boot And System Images - Cisco SLM224G4PS Software Manual

Voice gateway

Hide thumbs Also See for SLM224G4PS:

Table of Contents

This appendix describes the ROM monitor (also called the bootstrap program), which is the firmware

that runs when you power on or restart the Cisco VG224 voice gateway. During normal operation, the

ROM monitor helps to initialize the processor hardware and boot the operating system software. You can

also use the ROM monitor to help you isolate or rule out hardware problems encountered when installing

your router.

This appendix contains the following sections:

•

To use the ROM monitor, you must have access to the console port.

For information on connecting the console cable, refer to Quick Start Guide Cisco 2610 Router Cabling

Note

and Setup at the following URL:

http://www.cisco.com/univercd/cc/td/doc/product/access/acs_mod/cis2600/hw_inst/cabling/

2610ja.htm

OL-5005-01

Entering the ROM Monitor Mode, page C-1

ROM Monitor Commands, page C-2

ROM Monitor Syntax Conventions, page C-3

Command Descriptions, page C-3

Recovering Boot and System Images, page C-8

A P P E N D I X

Cisco VG224 Voice Gateway Software Configuration Guide

C-1

Table of Contents

Vg224