Table of Contents
Advertisement
File and Directory Operations
eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
...erased
Erase of slot0: complete
Formatting Compact Flash Memory as a Class C File System
Use these formatting commands to do the following:
•
•
For external compact flash memory cards, enter the format slot0: command.
For internal compact flash memory cards, enter the format flash: command.
The following example shows sample output for formatting an internal compact flash memory card with
a Class C flash file system:
Router# format flash:
Format operation may take a while. Continue? [confirm]
Format operation will destroy all data in "flash:".
Enter volume ID (up to 64 chars)[default flash]:
Current Low End File System flash card in flash will be formatted into DOS
File System flash card!
Format:Drive communication & 1st Sector Write OK...
Writing Monlib sectors ...................................................................
Monlib write complete
..
Format:All system sectors written. OK...
Format:Total sectors in formatted partition:250592
Format:Total bytes in formatted partition:128303104
Format:Operation completed successfully.
Format of flash complete
File and Directory Operations
The following sections describe file and directory operations for internal and external Cisco flash
memory cards. File and directory operations vary according to the formatted file system—Class B or
Class C.
Operations for Use with Class B Flash File System
The following file operations are useful for compact flash memory cards formatted with a Class B flash
file system.
Copying Files
To copy files to another location, enter the copy {flash: | slot0:} command.
Cisco VG224 Voice Gateway Software Configuration Guide
B-4
Format compact flash memory cards with a Class C flash file system
Remove the files from a compact flash memory card previously formatted with a Class C flash file
system
Continue? [confirm]
Appendix B
Formatting the Compact Flash Memory Cards
Continue? [confirm]
OL-5005-01
Advertisement
Table of Contents
