Installing A Css 11800 Module; Installation Precautions And Restrictions; Installation Precautions - Cisco CSS-11051-AC Hardware Installation Manual

11000 series content services switch

Table of Contents

Installing a CSS 11800 Module

Warning

Cisco 11000 Series Content Services Switch Hardware Installation Guide

1-14

This section applies to the CSS 11800 modules only and contains the following

sections:

Installation Precautions and Restrictions

•

Unpacking a CSS 11800 Module

Installing a Module

•

Installing a Passive SCM or SFM

This section includes background material related to installing a module into the

CSS 11800 chassis. It is recommended that you read the topics in this section

before installing a module.

Read and observe the following precautionary information prior to servicing the

CSS 11800.

Do not remove or install modules without using appropriate anti-static guard

measures. The CSS includes an anti-static wrist strap in the accessory kit.

Attach the copper tape end of the strap to an unpainted metal surface on the

chassis. You can leave the strap connected to the chassis when you are done.

If you do not power down the CSS 11800, an electrical energy hazard is present

within the chassis. Prior to installing or removing components, remove all

metallic objects from hands and wrists to prevent bridging of live contact

points.

Chapter 1

Unpacking and Installing the CSS

78-15146-02

Table of Contents