Table of Contents
Advertisement
Unpacking the CSS
Unpacking the CSS 11050 or CSS 11150
Unpacking the CSS 11800
Cisco 11000 Series Content Services Switch Hardware Installation Guide
1-4
To unpack the CSS 11050 or CSS 11150:
Remove the CSS and all accessories from the shipping carton.
1.
Check the configuration of the CSS and the accessories against the items
2.
listed on the packing slip. Report any discrepancies as described in
Product is Damaged"
3.
To install the CSS 11050 or CSS 11150, go to the
or CSS 11150"
section.
The CSS 11800 is shipped attached to a wooden pallet with screws and shipping
brackets. Due to the large size and weight of a unit, move it to the installation site
before unpacking it from the shipping carton.
To unpack the CSS 11800:
Remove all enclosed packing materials. Save the packing materials in case
1.
you need to repack the CSS later.
Remove the accessories from the shipping carton.
2.
Check the configuration of the CSS and the accessories against the packing
3.
slip. Report any discrepancies as described in the
section later in this chapter.
Using a Phillips screwdriver, remove the screws from the shipping brackets
4.
on the pallet.
Figure 1-1
5.
Carefully remove the CSS from the pallet.
Chapter 1
in this chapter.
shows the CSS 11800 attached to the wooden pallet.
Unpacking and Installing the CSS
"If the
"Installing the CSS 11050
"If the Product is Damaged"
78-15146-02
Advertisement
Table of Contents
Troubleshooting
