Advertisement
Disassembly Notice
Please be sure to pull out adapter and disconnect the battery.
Step 1 : Remove Screw *4pcs.
Step 2 : Flip up and put down the KB module to release HINGE.
Step 3 : Release MYLAR then remove Tweeter speaker.
1
Unscrew
3
TWEETER SPEAKER
Flip up and put down
2
3-1
3-2
Remove
Release MYLAR and remove
Screws
QTY
Spec
4
M2*4.5L(45,0.8)(K) #1
Assembly Notice
When reassembly Tweeter Speaker, please follow
the mark below to tidy up cable.
If KB MYLAR damaged, please use
GA402RK CABLE TAPE*6pcs to fix cable. (Yellow mark)
Torque (kgf-cm)
2.0±0.2
21
Back
Advertisement
