Advertisement
Quick Links
Advertisement
Related Manuals for Asus ROG Zephyrus G14 GA402R Series
Summary of Contents for Asus ROG Zephyrus G14 GA402R Series
- Page 1 ASUS ROG Zephyrus G14(GA402R) series Service Guide...
- Page 2 Table of Contents ⚫ Service Overview ⚫ ASUS ROG Zephyrus G14(GA402R) Overview ⚫ Components Top View ⚫ Components Bottom View ⚫ Repair Overview ⚫ Appropriate Tools ⚫ Keyparts and Related Parts ⚫ Disassembly Steps : • BOTTOM CASE • BATTERY and SSD •...
- Page 3 Service Overview • Carefully read through this Service Guide for a look at various components of the device before performing any service and repairs. • To provide the best service, we have provided the below information for technicians from distributors and resellers to perform the complete device disassembly and assembly.
- Page 4 ASUS ROG Zephyrus G14 (GA402R) series Overview Top View Cover View ❶ Microphone ❶ Array microphones ❷ AniMe Matrix ❷ Camera (on selected models) ❸ Camera indicator ❹ Display panel ❺ Status indicators ❻ Audio speakers ❼ Capital lock indicator ❽...
- Page 5 Components Top View LCD BEZEL MAIN BOARD BASE CASE BATTERY BATTERY CABLE LCD COVER KEYBOARD LCD Panel(14”) MODULE MODULE TOUCHPAD THERMAL MODULE HINGE HINGE CAP WIFI CARD ASSY EDP CABLE SPEAKER BUTTON BD TP FFC IR CAMERA FPC TWEETER SPEAKER PW FFC HINGE DECO (8P,0.5,L64.5MM)
- Page 6 Components Bottom View LCD Panel BASE CASE BUTTON BD LCD COVER MODULE LCD COVER CU FOIL PW GASKET LCD ADHESIVE LCD ADHESIVE LCD BEZEL THERMAL MODULE ASSY MAIN BOARD Without Matrix LED SKU With Matrix LED SKU COLOR ID=6D/6E COLOR ID=2D/2E PANEL BACK MYLAR With Matrix LED SKU Without Matrix LED SKU...
- Page 7 Repair Overview This chapter describes disassembly and assembly (Assemble document please look up from the last page), please follow the information provided in this section to perform the complete disassembly procedure. Precautions: Before you perform any service or repair on the notebook, please pay special attention to the cautions prevent any damages to the notebook. 1.
- Page 8 Appropriate Tools Please prepare and select the appropriate tools to disassemble/assemble for the ASUS ROG Zephyrus G14 (GA402R) series notebook. Screwdriver Alcohol 95% Glove Dust-free Cloth Please accord to different screw specification to choose different screwdriver and head. Plastic Blade NB LCD MYLAR *4pcs Use it to align panel position.
- Page 9 Appropriate Tools Please prepare and select the appropriate tools to disassemble/assemble for the ASUS ROG Zephyrus G14 (GA402R) series notebook. ❺ ❼ ❶ ❸ ❻ ❽ ❷ ❹ Item Part Name Memo ❶ Silicone scraping pen Please store it in the environment of 10 ~ 40 ℃.
- Page 10 BOTTOM CASE Disassembly Notice Step 1 : Remove rubbers *3pcs. Screws Spec Torque (kgf-cm) Step 2 : Remove screws *10pcs. Step 3 : Use plastic blade to pry the bottom case. M2*4.5L (4.5,0.8) (K) #1 2.0±0.2 M2*8.0L (4,0.8) (K) #1 2.0±0.2 Retention Screw 2.0±0.2...
- Page 11 BATTERY and SSD Disassembly Notice Please be sure to pull out adapter and disconnect the battery. Before disassembly battery connector, please be sure to pull out adapter and disconnect the battery more than ten seconds in order to IC damage. Step 1 : Disconnect the battery connector.
- Page 12 Disassembly Notice Please be sure to pull out adapter and disconnect the battery. Step 1 : Remove the Mylar. Step 2 : Unlock and remove the DDR. Assembly Notice Step 3 : Tear off the ABSORBER. Please make sure to paste mylar on DDR slot. Unlock Tear off Align...
- Page 13 WIFI CARD Disassembly Notice Please be sure to pull out adapter and disconnect the battery. Step 1 : Disconnect the RF CABLE connectors *2pcs. Step 2 : Remove the screw *1pc. Step 3 : Remove WIFI CARD. Screws Spec Torque (kgf-cm) Assembly Notice M2*2.5L (5,0.5) (K) #1 2.0±0.2...
- Page 14 SPEAKER Disassembly Notice Please be sure to pull out adapter and disconnect the battery. Step 1 : Disconnect the SPEAKER connector. Step 2 : Release tape and remove the SPEAKER. Assembly Notice For Speaker assembly, please follow the mark below to tidy up cable and tape. SPK CABLE TAPE Disconnect Release tape and remove...
- Page 15 FAN (with THERMAL MODULE and MAIN BOARD) Disassembly Notice Please be sure to pull out adapter and disconnect the battery. Step 1 : Release tapes then disconnect connectors. (yellow mark) Screws Spec Torque (kgf-cm) Assembly Notice Step 2 : Remove screws *8pcs. (blue mark) M2*4.5L(45,0.8)(K) #1 2.0±0.2 Step 3 : Remove MB with Thermal and FAN module.
- Page 16 THERMAL MODULE Disassembly Notice Please be sure to pull out adapter and disconnect the battery. Step 1 : Please follow the reverse screws numbers to remove screws *8pcs. Screws Spec Torque (kgf-cm) Step 2 : Remove the THERMAL MODULE from MB. Retention Screw 2.0±0.2 Recommend that the force point is at green block, and pull up thermal module to take...
- Page 17 MAIN BOARD (with FAN and THERMAL MODULE) Assembly Notice Please be sure to pull out adapter and disconnect the battery. Assembly Main Board, FAN, Thermal module Steps : Step 1 : Align upper side put the Main Board. Step 2 : Assembly the FAN *2pcs. Step 3 : Lock Screws *4pcs and connect FAN connecter.
- Page 18 MAIN BOARD Mainboard connector placement Supports using JIG BOARD to refresh F1 BIOS. CPU FAN GPU FAN EDP CABLE SPEAKER CAMERA PW FFC BL FFC KB FFC Battery TP FFC WIFI ANTENNA TWEETER SPEAKER Back...
- Page 19 MAIN BOARD GA402RK MB TOP WASHER Materials on mainboard GA402RK MB LED SPONGE GA402RK AMD CPU CPU BACK ABSORBER FP7 KAPTON GA402RK MB BOT LED SPONGE U GA402RK MB BOT KB NUT SPACER GA402RK MB FAN GA402RK MB TOP GPU GA402RK GPU E100- SUPPORT RUBBER ABSORBER...
- Page 20 BUTTON BD Disassembly Notice Please be sure to pull out adapter and disconnect the battery. Assembly Notice Step 1 : Remove screws *2pcs, then remove BUTTON BD with FFC. Step 2 : Disconnect FP connector and remove FFC. Step 3 : Remove the PW holder. Screws Spec Torque (kgf-cm)
- Page 21 TWEETER SPEAKER Disassembly Notice Please be sure to pull out adapter and disconnect the battery. Screws Spec Torque (kgf-cm) M2*4.5L(45,0.8)(K) #1 2.0±0.2 Step 1 : Remove Screw *4pcs. Step 2 : Flip up and put down the KB module to release HINGE. Assembly Notice Step 3 : Release MYLAR then remove Tweeter speaker.
- Page 22 KEYBOARD MODULE Disassembly Notice Please be sure to pull out adapter and disconnect the battery. Step 1 : Remove KB module. Assembly Notice Remove For ANTENNA assembly, please follow the mark below to tidy up cable and paste tape. TAPE MAIN Back...
- Page 23 TOUCHPAD MODULE Assembly Notice Disassembly Notice Please be sure to pull out adapter and disconnect the battery. If FFC is damage during disassembly, please replace new Step 1 : Disconnect TP FFC and tear off TP EMI FABRIC. one. Here are some samples of FFC damage: Step 2 : Release the RF cable and remove screws *2pcs.
- Page 24 LCD BEZEL Disassembly Notice Please be sure to pull out adapter and disconnect the battery. Remove LCD BEZEL. Assembly Notice Start from the bottom right corner of the bezel, using the Plastic Blade to pry open bezel. When reuse the LCD BEZEL: Please paste new LCD BEZEL ADHESIVE before assembly BEZEL.
- Page 25 LCD PANEL Disassembly Notice Please be sure to pull out adapter and disconnect the battery. Step 1 : Remove screws *6pcs, and remove Hinge*2pcs. Screws Spec Torque (kgf-cm) Step 2 : Remove screws *4pcs, and remove hinge cap *2pcs & hinge DECO rubber *2pcs. M2.5*2.3L (7.5,0.6) (K)#1 2.5±0.2 kgf-cm Step 3 : Pull out LCD adhesive *2pcs.
- Page 26 LCD PANEL Assembly Notice Please be sure to pull out adapter and disconnect the battery. When reuse the LCD PANEL or BEZEL: Please use the fingertip to clean the residual glue on PANEL or BEZEL. When use new PANEL, please paste below materials follow the Steps: Paste the GRAPHITE.
- Page 27 LCD PANEL Assembly Notice Please be sure to pull out adapter and disconnect the battery. When assembly the LCD PANEL: (The following is an operation example) When assembly the LCD PANEL and EDP cable: (The following is an operation example) Step 1~2 : Paste NB LCD MYLAR *4pcs on LCD COVER.
- Page 28 LCD COVER MODULE Disassembly Notice Please be sure to pull out adapter and disconnect the battery. Step 1 : Release and disconnect MIC FPC connector *2pcs. Assembly Notice Step 2 : Remove CAMERA. When reuse the LCD COVER: Step 3 : Remove MIC RUBBER *2pcs. Release and disconnect Please paste new PANEL ADHESIVE *2pcs.