Cisco Asr1000-Sip10 Oversubscription Guidelines; Cisco Asr1000-Sip40 Oversubscription Guidelines - Cisco ASR1004 - ASR 1004 Modular Expansion Base Hardware Installation Manual
Aggregation services routers sip and spa
Hide thumbs
Also See for ASR1004 - ASR 1004 Modular Expansion Base:
- Quick start manual (39 pages) ,
- Install manual (32 pages) ,
- Software configuration manual (462 pages)
Table of Contents
Advertisement
Bandwidth Oversubscription
Table 3-2
SPA Bandwidth Capacity (continued)
SPA
2-Port Clear Channel T3/E3 SPA
4-Port Clear Channel T3/E3 SPA
4-Port Serial SPA
CEoP (Circuit Emulation over Packet) SPA
1-Port Channelized OC-3 ATM CEoP SPA
2-Port Channelized T3/E3 ATM CEoP SPA
24-Port Channelized T1/E1 ATM CEoP SPA
1. Total bandwidth value assumes two OC-12c/STM-4 optics modules.
2. Total bandwidth value assumes four OC-12c/STM-4 optics modules.
3. Total bandwidth value assumes eight OC-12c/STM-4 optics modules.
4. Total bandwidth value assumes four ports of maximum bandwidth.
Cisco ASR1000-SIP10 Oversubscription Guidelines
The total available bandwidth in your router ultimately depends on the features that you have enabled,
and the combination of hardware installed. This section describes some of the basic guidelines that you
can use to plan for a possible oversubscription on the Cisco ASR1000-SIP10.
Each Cisco ASR1000-SIP10 supports 4 single-height SPAs. The chassis models of the Cisco ASR 1000
Series Aggregation Services Routers support a different maximum number of SIPs as follows:
•
•
•
Each Cisco ASR1000-SIP10 has a 10 Gbps link to the Embedded Services Processor (ESP). Therefore,
there is an aggregate bandwidth limit—the sum of the total SPA bandwidth installed in the SIP—of 10
Gbps per SIP. This limit can be exceeded with the installation of some combinations of SPAs. See
Table 3-1
maximum bandwidth limitations of the ESP (5, 10, or 20 Gbps) depending on the ESP model installed.
Cisco ASR1000-SIP40 Oversubscription Guidelines
The total available bandwidth in your router ultimately depends on the features that you have enabled,
and the combination of hardware installed. However, this section describes some of the basic guidelines
that you can use to plan for a possible oversubscription on the Cisco ASR1000-SIP40.
Each Cisco ASR1000-SIP40 supports:
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide
3-6
Cisco ASR 1002 and Cisco ASR1002-Fixed Routers — 1 embedded SIP
Cisco ASR 1004 Router — 2 SIPs
Cisco ASR 1006 Router — 3 SIPs
for individual SPA bandwidth values. This aggregate bandwidth is then subject to the
Chapter 3
Overview: Cisco ASR 1000 Series Aggregation Services Routers SPAs
Per-Port Bandwidth
44.736 Mbps (T3)
34.368 Mbps (E3)
44.736 Mbps (T3)
34.368 Mbps (E3)
128 Kbps (EIA/TIA-232)
8064 Kbps (V.35,
EIA/TIA-449, -530, and
-530a)
2 Mbps (X.21)
155 Mbps
44.736 Mbps (T3)
1.544 Mbps (T1)
2.048 Mbps (E1)
Number of Ports
Total Bandwidth
2
89.47 Mbps (T3)
68.74 Mbps (E3)
4
178.94 Mbps (T3)
137.47 Mbps (E3)
4
8 Mbps
1
155 Mbps
2
89.47 Mbps (T3)
24
37.06 Mbps (T1)
49.15 Mbps (E1)
4
OL-14126-12
Advertisement
Table of Contents
Troubleshooting
