Rack-Mounting, Tabletop Installation, And Cabling; Preparing To Install The Cisco 7301 Router; Tools And Parts Required - Cisco 7301 Installation And Configuration Manual
Configuration guide
Hide thumbs
Also See for 7301:
- Regulatory compliance and safety information manual (70 pages) ,
- Manual (111 pages) ,
- Quick start manual (35 pages)
Table of Contents
Advertisement
Preparing to Install the Cisco 7301 Router
Figure 2-1
1
1
2
Table 2-1
Table 2-1
Cisco 7301
Dimensions
Weight
Tools and Parts Required
Your Cisco 7301 chassis is fully assembled at the factory; no assembly is required. However, you need
the following tools and equipment to install the chassis and the rack-mount and cable-management kit:
•
•
•
•
•
Cisco 7301 Installation and Configuration Guide
2-2
Dimensions of Cisco 7301 Router
13.87 in.
17.3 in.
provides dimensions and weight information.
Cisco 7301 Router Dimensions and Weight
1.73 in. x 17.3 in. x 13.87 in. (4.39 cm x 43.9 cm x 35.23 cm)
Chassis fully configured with a port adapter ~ 10.5 lb (4.76 kg)
Number 2 Phillips screwdriver
A 3/16-inch flat-blade screwdriver
Tape measure (optional)
Level (optional)
Grounding lug and wires:
–
A grounding lug with two number-10 screw holes with a 0.63-inch (16.002-mm) spacing
between them
A wire receptacle large enough to accept a 6-AWG multistrand, copper wire
–
Two Phillips machine screws with locking washers—M5 (metric), 0.031-inch (.08-mm) pitch,
–
0.315-inch (8-mm) length
A crimping tool to fit the grounding lug wire receptacle
–
Chapter 2
2
3
12.3 in.
Rack-Mounting, Tabletop Installation, and Cabling
3
OL-5418-07
Advertisement
Chapters
Table of Contents
Troubleshooting
