Table of Contents
Advertisement
Chapter 4
DHCP > Setup
Setup
Enable DHCP Server
To use the Router as your network's
DHCP server, select Enable DHCP Server. If you already
have a DHCP server on your network, remove the check
mark.
Dynamic IP
Clent Lease Tme
The Client Lease Time is the amount
of time a network user will be allowed connection to the
Router with their current dynamic IP address. Enter the
amount of time, in minutes, that the user will be "leased"
this dynamic IP address. The range is 5-43,200 minutes.
The default is 440 minutes.
Dynamc IP Range Start/End
and ending IP address to create a range of available IP
addresses. The default range is 00-49. Enter a value for
the DHCP server to start with when issuing IP addresses.
This value must be 192.168.1. 2 or greater, because the
default IP address for the Router is 192.168.1.1.
Static IP
You can assign a static IP address to a specific device based
on its MAC address.
Show unknown MAC addresses
MAC addresses to view all devices' IP addresses and
corresponding MAC addresses. The Unknown MAC
Address List appears.
4-Port SSL/IPSec VPN Router
Enter a starting IP address
Click Show unknown
Advanced Configuration
Unknown MAC Address List
To add an IP address and MAC address set to the Static
IP list, select Enable, and then click Apply. To add all IP
addresses and MAC addresses to the Static IP list, click
Select All.
To update the on-screen information, click Refresh. To
exit this screen and return to the DHCP > Setup screen,
click Close.
Statc IP Address
Enter the static IP address. You can
enter 0.0.0.0 if you want the Router to assign a static IP
address to the device.
MAC Address
Enter the MAC address of the device.
Name
Enter a descriptive name for the device.
Enable
Select Enable to assign the static IP address to
this device.
Click Add to Lst, and configure as many entries as you
would like, up to a maximum of 100. To delete an entry,
select it and click Delete selected Entry.
Block MAC address on the lst wth wrong IP address
block traffic from devices with MAC addresses on the Static
IP list but using the wrong IP addresses, select this option.
It prevents users from changing device IP addresses
without your permission.
Block MAC address not on the lst
devices using dynamic IP addresses, select this option. It
blocks all devices with MAC addresses not listed on the
Static IP list.
DNS
DNS Server
You can assign DNS server(s) to the DHCP
clients so the Router will use the DNS server(s) for faster
access to functioning DNS server(s). Enter the IP address
of at least one DNS server.
WINS
WINS Server
Windows Internet Naming Service (WINS)
is a service that resolves NetBIOS names to IP addresses.
WINS is assigned if the computer (DHCP client) requests
one. If you do not know the IP address of the WINS server,
keep the default, 0.0.0.0.
To
To block traffic from
9
Advertisement
Table of Contents
Troubleshooting
