Problem
The water comes out of the cavity
embossment.
13.2 Service data
If you cannot find a solution to the problem
yourself, contact your dealer or an Authorised
Service Centre.
The necessary data for the service centre is
on the rating plate. The rating plate is on the
front frame of the appliance cavity. Do not
remove the rating plate from the appliance
cavity.
14. ENERGY EFFICIENCY
14.1 Product Information according to EU and UK Ecodesign Regulations
for Hob
Model identification
Type of hob
Number of cooking zones
Heating technology
Diameter of circular cooking zones
(Ø)
Energy consumption per cooking
zone (EC electric cooking)
Energy consumption of the hob (EC electric hob)
IEC/EN 60350-2 - Household electric cooking appliances - Part 2: Hobs - Methods for measuring performance.
14.2 Hob - Energy saving
You can save energy during everyday
cooking if you follow the hints below.
• When you heat up water, use only the
amount you need.
24
ENGLISH
Possible cause
There is to much water in the cavity
embossment.
We recommend that you write the data
here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)
CCB6741MCB
CCB6741ACB
CCB6741ACM
Hob inside Freestanding Cooker
4
Radiant Heater
Left front
Left rear
Right front
Right rear
Left front
Left rear
Right front
Right rear
• If it is possible, always put the lids on the
cookware.
• Before you activate the cooking zone put
the cookware on it.
• The cookware bottom should have the
same diameter as the cooking zone.
Remedy
Deactivate the oven and make sure
that the appliance is cold. Wipe the
water with a cloth or sponge. Add
the correct amount of water to the
cavity embossment. Refer to "Acti‐
vating the SteamBake function".
.........................................
.........................................
.........................................
21.0 cm
14.5 cm
18.0 cm
18.0 cm
184.8 Wh/kg
181.8 Wh/kg
192.3 Wh/kg
192.3 Wh/kg
187.8 Wh/kg