Table of Contents
Advertisement
2.2 Dialing mode
If you cannot dial (page 27), change this setting
according to your telephone line service.
1
Press {MENU}.
2
Press {#}, then {1}{2}{0}.
3
Press {1} or {2} to select the desired setting.
{1} "PULSE": For rotary pulse dial service.
{2} "TONE" (default): For tone dial service.
4
Press {SET}.
5
Press {MENU} to exit.
{MENU}
{SET}
SYSTEM SETUP
PRESS [( )]
DIALING MODE
=TONE
[V^]
2.3 Selecting the
operation mode
(Fax/Copy/Scan)
This unit has three operation modes. You can
select the desired mode by pressing one of the
following buttons.
– {FAX}: Select this mode when using the unit
as a fax machine (page 27).
– {COPY}: Select this mode when using the
unit as a copy machine (page 43).
– {SCAN}: Select this mode when using the
unit as a scanner for the computer (page 53).
Note:
L The default operation mode is the copy
mode.
You can change the default operation mode
(feature #463 on page 59) and the timer
before returning to the default operation
mode (feature #464 on page 60).
2. Preparation
21
Advertisement
Table of Contents
