Advertisement
Connecting speakers
Connect the speakers as illustrated. Connect a subwoofer if needed.
Subwoofer
(built-in amp)
Peel off about 10 mm of insulation on the end
1
of the speaker cable and twist its core tightly.
10 mm
Turn the knob of the speaker jack to the left to
2
loosen it, then insert the core of the speaker
cable into the hole in the jack.
Turn the knob back to the right to tighten it.
3
Speaker
(Right channel)
+
–
SERVICE
GND
ANTENNA
FM
AM
1
OPTICAL
2
75Ω
1
COAXIAL
2
SUBWOOFER
OUT
CD
–
NETWORK
SPEAKERS
A
B
NOTE
• Use speakers with an impedance of at least 4-ohm.
• If using 4-ohm speakers (or more than 4-ohm but less than
8-ohm), change the impedance settings of this product. These
settings can be changed in the product's Advanced Setup menu.
See the User Guide for details.
NOTICE
Do not allow the core wires of a speaker cable to touch the core
wires of another speaker cable or any metal parts of the product.
Doing so may damage the product and/or the speakers.
Speaker
(Left channel)
+
3
EN
Advertisement
Chapters
