hit counter script
Download
Share
Print this page
Yamaha ME02R96 Owner's Manual
  1. Manuals
  2. Brands
  3. Yamaha Manuals
  4. Computer Hardware
  5. ME02R96
  6. Owner's manual
Yamaha ME02R96 Owner's Manual

Yamaha ME02R96 Owner's Manual

Memory expansion kit
Hide thumbs
1
2
3
4
5
6
7
8
9

Advertisement

Quick Links

Download this manual
Thank you for your purchase of the YAMAHA ME02R96 memory expansion kit for the 02R96 mixer.
By replacing the original CPU board with this ME02R96 expansion board, you will expand your
mixer's automix memory to 7MB—a sevenfold increase that will make your mixer even more versa-
tile and even easier to use.
The ME02R96 expansion kit must be installed by an authorized
serviceperson. Please contact a local Yamaha dealer or a service
center to arrange for installation. Do not attempt to install the
ME02R96 on your own.
Please read through the following precautions carefully before having the serviceperson install this
ME02R96 expansion kit. Be sure to retain the manual in a safe place.
Precautions
WARNINGS
Failure to observe the following warnings may lead to fatality or serious injury from fire or
electric shock.
G
Do not attempt to disassemble or modify the
ME02R96 board. Do not apply excessive force to
board connectors or other board components.
(Mishandling of the board may lead to shock, fire
hazard, or equipment failure.)
CAUTIONS
Failure to observe the following cautions may lead to injury, or may result in damage to
equipment or other property.
G
Be careful to avoid catching or snagging fingers
while carrying out the installation.
G
When handling the ME02R96 board, do not
touch the board's metallic leads (pins). (Pins are
sharp and may cause hand cuts.)
G
The ME02R96 board is electrostatic-sensitive.
Before handling the board, you should briefly
touch the main unit's metal casing with your bare
hand so as to drain off any static charge from
your body.
ME02R96
Owner's Manual
G
G
G
Be sure to unplug the 02R96 main unit from the
power supply before installing the ME02R96
board (to eliminate shock hazard).
Before starting installation, be sure to save all
important data from the 02R96 unit to an external
MIDI device. This installation process will clear all
of the unit's user memory and will reset all set-
tings to their defaults.
Be sure to install the included lithium battery. This
is a backup battery that is required maintain the
data in the 02R96's expanded memory.
1
ME02R96

Advertisement

loading

Related Manuals for Yamaha ME02R96

Summary of Contents for Yamaha ME02R96

  • Page 1 Thank you for your purchase of the YAMAHA ME02R96 memory expansion kit for the 02R96 mixer. By replacing the original CPU board with this ME02R96 expansion board, you will expand your mixer’s automix memory to 7MB—a sevenfold increase that will make your mixer even more versa- tile and even easier to use.

  • Page 2: Fcc Information (U.s.a.)

    The above statements apply ONLY to those products distributed by Yamaha Corpora- tion of America or its subsidiaries. * This applies only to products distributed by YAMAHA CORPORATION OF AMERICA.
  • Page 3 Yamaha cannot be held responsible for damage caused by improper use or modifications to the device, or data that is lost or destroyed. Please dispose of used batteries in accordance with local regulations. Illustrations in this manual are for explanatory purposes only, and may not match the actual appearance of the product.

  • Page 4: System Software

    Studio Manager: The ME02R96 is not compatible with Studio Manager versions prior to V1.1.1. If your version is older than V1.1.1, please replace it by installing the Studio Manager version included on the accom- panying CD-ROM. For information about how to carry out the installation, refer to Studio Manager’s installation guide.
  • Page 5 ~The following instructions are intended for use by authorized serviceper- sons only.~ This kit is not user-installable. Users should contact a local Yamaha dealer or a service center to arrange for installation by a Yamaha-authorized serviceperson. Detach and Raise the Control Panel When removing each screw, note its location and be sure to return it to the same place when reassem- bling.
  • Page 6 If the MB02R96 peak meter bridge is installed on the 02R96, remove it. First disconnect the bridge cable from the METER connector on the 02R96. Then remove the 4 screws holding the bridge in place (as shown below), and remove the bridge. 2 Screws 02R96 METER Connector 2 Screws ME02R96...
  • Page 7 Screw 7 Screws Hold onto the LCD, and lift up the rear of the control panel. Secure the raised control panel in place, so that it does not fall back down. ME02R96 <Rear View> <Top View> 7 Screws <Front View>...
  • Page 8 Remove the 4 screws holding the CPU board in place, and remove the CPU board. Mount the ME02R96 board. Connect the two black connectors on the underside of the ME02R96 board to the two black connectors on the 02R96. Then fasten the ME02R96 into place using 4 screws (the 4 screws you removed above, or the 4 screws included in the kit).
  • Page 9 It is not possible to load automix data that exceeds the mixer’s automix memory capacity (7MB with the ME02R96 installed; 1MB if it is not installed). If you attempt to load such data, the 02R96 will dis- play an appropriate message and will execute the load. Any data already existing in the 02R96 will remain unchanged.