Table of Contents
Advertisement
1. Do not touch the glass part of the bulb.
5. Install the socket by pushing it in and turning
it clockwise.
6. Install the bulb cover.
7. Place the headlight unit in the original posi-
tion, and then install the bolt.
8. Adjust the headlight beam if necessary.
EBU25562
Adjusting a headlight beam
ECB00691
NOTICE
It is advisable to have a Yamaha dealer make
this adjustment.
To raise a headlight beam, turn the headlight
beam adjusting bolt in direction (a).
To lower a headlight beam, turn the adjusting bolt
in direction (b).
(a)
(b)
1
1. Headlight beam adjusting bolt
EBU26921
Tail/brake light
This model is equipped with an LED type of
tail/brake light.
If the tail/brake light does not come on, have a
Yamaha dealer check it.
EBU25652
Removing a wheel
1. Place the ATV on a level surface.
8-53
8
Advertisement
Table of Contents
Troubleshooting
