Table of Contents
Advertisement
5 Service Mode
5.1.
How to enter into Service Mode
5.1.1.
Purpose
After exchange parts, check and adjust the contents of adjustment mode.
While pressing [VOLUME ( - )] button of the main unit, press [INFO] button of the remote control three times within 2 seconds.
5.1.2.
Key command
[1] button...Main items Selection in forward direction
[2] button...Main items Selection in reverse direction
[3] button...Sub items Selection in forward direction
[4] button...Sub items Selection in reverse direction
[VOL] button...Value of sub items change in forward direction ( + ), in reverse direction ( - )
5.1.3.
How to exit
Switch off the power with the [POWER] button on the main unit or the [POWER] button on the remote control.
5.1.4.
Contents of adjustment mode
• Value is shown as a hexadecimal number.
• Preset value differs depending on models.
• After entering the adjustment mode, take note of the value in each item before starting adjustment.
ADJUST
WB-ADJ
OPTION
Main item
Sub item
H POS
H AMP
V POS
V AMP
V COM
R-GAIN
G-GAIN
B-GAIN
R-CENT
G-RENT
B-CENT
Boot upgrade
STBY-SET
EMERGENCY
CLK MODE
CLOCK
Y/C DELAY
OPT 1
OPT 2
OPT 3
OPT 4
EDID-CLK
Sample Data
8D
AE
FF
6C
80
A0
NO
00
ON
00
FC7
DYNAMIC
00000000
11100110
00001001
00000000
HIGH
9
TH-43E460D
Advertisement
Table of Contents
