1 General safety instructions • Do not force open the locked loading door. The door will This section includes security open immediately after the instructions which may help prevent washing cycle has ended. If the the injuries and material damage risks. door does not open, apply the All kinds of warranties shall be invalid if solutions provided for “Loading...
1.3 Children’s safety CAUTION! • Do not forget to close the CAUTION! loading door when leaving the • This product can be used room where the product is by children at and above 8 located. years old and by persons •...
This product has been manufactured with high DANGER quality parts and materials which can be reused and are suitable for recycling. Do not dispose • Do not wash the product by of the waste product with normal domestic spraying or pouring water onto and other wastes at the end of its service life.
4 Technical specifications Supplier name or trademark Beko WTV8712XW Model name 7149344300 Rated capacity (kg) Maximum spin speed (rpm) 1400 Built-in Height (cm) Width (cm) Depth (cm) Single Water inlet / Double Water inlet • / - • Available Electrical input (V/Hz)
4.1 Installation 4.1.3 Removing the transportation locks • Apply to the nearest authorised service agent for the installation of your product. 1. Loosen all bolts with an appropriate wrench until they turn freely. • Preparation of the location and electrical, tap water and waste water installations at 2.
laundry may come out excessively wet. Therefore, follow the heights described in the figure. • To prevent the waste water to go back into the machine again and to ensure easy drainage, do not immerse the end of the hose into the waste water or do not insert it into the drain for more than 15 cm.
4.2 Preparation • The wiring for the electrical outlet circuit must be sufficient to meet the appliance 4.2.1 Sorting the laundry requirements. Use of a Groud Fault Circuit • Sort laundry according to type of fabric, Interrupter (GFCI) is recommended. colour, and degree of soiling and allowable •...
4.2.3 Tips for energy and water saving 4.2.6 Using detergent and softener Following information will help you use the product in an ecological and energy/water- INFORMATION efficient manner. • When using detergent, softener, starch, • Operate the product in the highest load fabric dye, bleach and descaling agents;...
Page 10
If the product is equipped with a liquid • Wash woollens at suggested programme with special detergent made specifically for detergent part: woollens • Please review the programme descriptions part for suggested programme for different textiles. • All recommendations about detergents are valid for selectable temperature range of programmes.
Using bleaches • Do not pour the bleach onto the laundry. • Select a programme with prewash and add the • Do not use it with the coloured items. bleach at the beginning of the prewash. Do not • When using an oxygen-based bleach, select put detergent in the prewash compartment.
4.3 Operating the product 1 - Programme Selection Knob (Uppermost position On / Off) 4.3.1 Control panel 2 - Display 3 - End Time Adjustment Button 4 - Programme Follow-up Indicator 5 - Start/Pause Button 6 - Auxiliary Function Button 3 7 - Auxiliary Function Button 2 8 - Auxiliary Function Button 1 9 - Spin Speed Adjustment Button...
Page 13
• : Selectable * : Automatically selected, cannot be cancelled. ** : Eco 40-60 ( ) is the test programme in accordance with EN 60456:2016 and energy label with Commission Delegated Regulation (EU) 1061/2010 ***: Eco 40-60 with 40 °C temperature selection is the test programme in accordance with EN 60456:2016/prA:2019 and energy label with Commission Delegated Regulation (EU) 2019/2014 - : See the programme description for maximum load.
4.3.5 Main programmes • Hygiene+ Depending on the type of fabric, use the Use this programme for laundry that requires following main programmes. an intense, long, anti-allergic and hygienic washing cycle at high temperature. A high • Cottons level of hygiene is ensured thanks to the long You can wash your durable cotton laundry heating and additional rinsing step.
Mix 40 • When the quick function is not selected: You can use this programme to wash cottons and Butter Food synthetics together without the need to sort them. Grass Mayonnaise Salad Dressing Coke Make-up Shirts • Sweat Machine Oil Use this programme to wash shirts made of Collar Soil Baby food...
Page 16
4.3.8 Temperature selection 4.3.10 Auxiliary function selection Whenever a new programme is selected, the Select the desired auxiliary functions before recommended temperature for the selected starting the programme. You can also select programme appears on the temperature indicator. or cancel auxiliary functions suitable for the running programme without pressing the Start/ To decrease the temperature, press the Pause button while the machine is operating.
4.3.10.2 Functions/Programmes To disable Child Lock: Selected by Pressing the Function Press and hold the Auxiliary Function button 2 for 3 seconds while the programme is running. Buttons for 3 Seconds While you’re holding the button pressed for 3 • Drum Clean seconds, C03, C02 and C01 will be displayed To select this programme, press and hold the respectively.
Page 18
4.3.13 Progress of programme 4. Press the Start/Pause button. The delayed end time you have set will be displayed. Countdown Progress of a running programme can be will start for delayed end. On the display, “_” will followed from the Programme Follow-up move up and down next to the delayed end time.
Opening the loading door in case of power 4.3.15 Changing the selections failure: after programme has started Switching the machine to pause mode INFORMATION Press the Start/Pause to switch the machine to pause mode while a programme is running. • In case of a power failure, you can use the The light of the current programme will flash on loading door emergency handle under the pump the Programme Follow-up indicator, indicating...
4.4 Maintenance and cleaning When you turn the Programme Selection knob, the machine will end the programme but will not Service life of product extends and frequently discharge the water inside. When you select experienced problems will be reduced if it is and start a new programme, the newly selected cleaned at regular intervals.
4. Replace the seals and filters carefully and INFORMATION tighten their nuts by hand ensuring there are no leaks. • Foreign metal substances will cause rust 4.4.5 Draining remaining water stains in the drum. Clean the stains on the drum surface by using cleaning agents for and cleaning the pump filter stainless steel.
5 Troubleshooting 3 Follow the below procedures in order to drain water. Programmes do not start after the loading door is closed. The product does not have an emergency • Start / Pause / Cancel button is not pressed. >>>Press water drain hose, in order to drain the water: Start / Pause / Cancel button.
Page 23
Loading door cannot be opened. Washing performance is poor: Laundry turns gray. (**) • Loading door lock is activated because of the water level in • Insufficient amount of detergent has been used over a long the product. >>>Drain the water by running the Pump or period of time.
Page 24
Washing machine does not rinse well. Too much foam forms inside the product. (**) • The amount, brand and storage conditions of the detergent • Improper detergents for the washing machine is used. used are inappropriate. >>>Use a detergent appropriate >>>Use detergents appropriate for the washing machine.