Table of Contents
Advertisement
Installation Options with Rack-Mount Kits
Warning
Caution
Note
Warning
Installation Options with Rack-Mount Kits
The rack-mount kit enables you to install the switch into racks of varying depths. You can position the switch
with easy access to either the port connections or the fan and power supply modules.
You can install the switch using the following rack-mount options:
• Rack-mount kit (NXK-ACC-KIT-1RU) which you can order from Cisco. This option offers you easy
• Rack-mount kit (N3K-C3064-ACC-KIT) which you can order from Cisco.
The rack or cabinet that you use must meet the requirements listed the in
and Racks, on page 33
Note
Cisco Nexus 9232E-B1 NX-OS Mode Switch Hardware Installation Guide
14
Statement 1006 Chassis Warning for Rack-Mounting and Servicing
To prevent bodily injury when mounting or servicing this unit in a rack, you must take special precautions to
ensure that the system remains stable. The following guidelines are provided to ensure your safety:
• This unit should be mounted at the bottom of the rack if it is the only unit in the rack.
• When mounting this unit in a partially filled rack, load the rack from the bottom to the top with the
heaviest component at the bottom of the rack.
• If the rack is provided with stabilizing devices, install the stabilizers before mounting or servicing the
unit in the rack.
To prevent loss of input power, ensure the total maximum loads on the circuits supplying power to the switch
are within the current ratings for the wiring and breakers.
For AC input application, please refer to the statement below:
Statement 1005 Circuit Breaker
This product relies on the building's installation for short-circuit (overcurrent) protection. Ensure that the
protective devices is rated not greater than 20A (North America), 16A (Europe), and 13A (UK).
installation, greater stability, increased weight capacity, added accessibility, and improved removability
with front and rear removal.
section.
You are responsible for verifying that your rack and rack-mount hardware comply with the guidelines that
are described in this doc.
Installing the Chassis
General Requirements for Cabinets
Advertisement
Chapters
Table of Contents
