Table of Contents
Advertisement
Configure the core size of the media rolls
Configure the core size of the media rolls
Introduction
The standard core size of the media rolls for the ColorWave 3800 is 3 inch.
If you also use 2 inch cores, enable the setting [Rolls with 2-inch core diameter].
If [Rolls with 2-inch core diameter] is enabled, the printer will ask the used core size when loading
a media roll.
Procedure
1. Open the [Configuration] - [Printer setup] tab.
2. Click on [Edit] in the [Media] section, or click on the [Rolls with 2-inch core diameter] setting.
3. Select the correct value.
4. Click [Ok] to confirm, or [Cancel] to reject your entries.
136
Chapter 3 - Define your workflow with WebTools Express
Advertisement
Table of Contents
