Table of Contents
Advertisement
Quick Links
Operating
Instructions
COMPACT
STEREO CD CASSETTE DECK RECEIVER
XR-J11/XK-J22
AUTO RETURN STEREO TURNTABLE
PL-J210
SPEAKER SYSTEM
S-J11D/S-J120/S-J220
DIGITAL AUDIO
Thank you for buying this Pioneer product.
Please read through these operating instructions so you will know how
to operate your model properly. After you have finished reading the
instructions, put them away in a safe place for future reference.
In some countries or regions, the shape of the power plug and power
outlet may sometimes differ from that shown in the explanatory
drawings. However, the method of connecting and operating the unit
is the same.
WARNING
: TO PREVENT FIRE OR SHOCK HAZARD, DO
NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
"This product complies with the Radio Interference require¬
ments of the EC (European Community) Directive 871308)EEC."
*The S-J11D is not sold in Europe. The S-J120 and S-J220 are sold
only in Europe.
The S-J120 speaker system is for use with the XR-J11 only and the
S-J220 Speaker system is for use with the XR-J22 only.
Operating instructions for S-J220 are attached to the side of
speakers.
LINE VOLTAGE SELECTOR SWITCH
Only multi-voltage models are provided with this switch. U.S.,
Canadian, European, U.K., and Australian models are not
provided with this switch.
Main voltages in Saudi Arabia are 127 V and 220 V only. Never
use this model with 110 V setting in Saudi Arabia.
Before your model is shipped from the factory, this switch is set to
the power requirements of the destination; nevertheless, you
should check that it is set properly before plugging the power cord
into the wall outlet.
[For Mufti-voltage model]
CAUTION
• Use of controls or adjustments or performance of procedures
other than those specified herein may result in hazardous
radiation exposure.
• The use of optical instruments with this produnt will increase
eye hazard.
1. Disconnect the power cord.
2. Use a screwdriver with a tip that
fits neatly in the groove.
3. Insert the screwdriver into the
groove on the voltage selector
and adjust according to the
voltage value of your area.
VOLTAGE SELECTOR ■
CONTENTS
CONNECTIONS . 3
6
PANEL FACILITIES . 7
BASIC OPERATIONS. 14
EDIT RECORDING . ..
20
MAINTENANCE . 21
TROUBLESHOOTING . 22
SPECIFICATIONS. 24
[For Multi-voltage model]
FM/AM CHANNEL STEP SWITCH
Adjustment is only necessary when there is a CHANNEL STEP
switch at the rear panel.
The CHANNEL STEP switch is located on the rear panel of the CD
deck receiver. Before the CD deck receiver leaves the factory, this
switch is set to the channel step standard of the area where the
CD deck receiver is sold. Depending on the position of this
switch, each time TUNING button is pressed, the frequency
display changes by the following amount:
[100 kHz/10 kHz] position
For areas with channel step of 100 kHz for FM and 10 kHz for AM.
[50 kHz/9 kHz] position
For areas with channel step of 50 kHz for FM and 9 kHz for AM.
NOTE:
ff the switch is set to the wrong position, correct tuning may not be
possible.
Consult your dealer if you are not sure about the radio channel
step standard in your area.
PIONEER'
The Art of Entertainment
Advertisement
Table of Contents
