hit counter script
Toro eTimeCutter 75841 Operator's Manual
  1. Manuals
  2. Brands
  3. Toro Manuals
  4. Lawn Mower
  5. eTimeCutter 75841
  6. Operator's manual

Toro eTimeCutter 75841 Operator's Manual

42in or 54in riding mower
Hide thumbs Also See for eTimeCutter 75841:
Table of Contents

Advertisement

Quick Links

Download this manual
Operator's Manual
eTimeCutter® 42in or 54in Riding Mower
Model—Serial Range
75841—400000000 and Up
75851—400000000 and Up
*3463-565* A
3463-565A
Original Instructions (EN)

Advertisement

Table of Contents
loading

Related Manuals for Toro eTimeCutter 75841

Summary of Contents for Toro eTimeCutter 75841

  • Page 1 Operator’s Manual eTimeCutter® 42in or 54in Riding Mower Model—Serial Range 75841—400000000 and Up 75851—400000000 and Up *3463-565* A 3463-565A Original Instructions (EN)

  • Page 2: Table Of Contents

    Operating the Parking Brake ..................... 4–9 Driving the Machine ........................4–10 Operating the Mower Blade-Control Switch (PTO) ............4–12 Side Discharge..........................4–13 © 2023—The Toro ® Company Contact us at www.Toro.com 8111 Lyndale Ave So Printed in the USA Bloomington, MN 55044 All rights reserved...
  • Page 3 Adjusting the Height of Cut....................... 4–13 Adjusting the Anti-Scalp Rollers....................4–14 Operating Tips..........................4–14 After Operation..........................4–16 After Operation Safety....................... 4–16 Charging the Battery Packs ..................... 4–16 Hauling the Machine ........................4–18 Chapter 5: Maintenance ........................5–1 Maintenance Safety ......................... 5–1 Recommended Maintenance Schedule..................

  • Page 4: Chapter 1: Introduction

    Whenever you need service, genuine Toro parts, or additional information, contact an Authorized Service Dealer or Toro Customer Service and have the model and serial numbers of your product ready. These numbers are located on the serial plate on your product .

  • Page 5: Chapter 2: Safety

    Chapter 2 Safety General Machine Safety Warnings WARNING—Read all safety warnings, instructions, illustrations and specifications provided with this machine. Failure to follow the warnings and instructions may result in electric shock, fire and/ or serious injury. The term “machine” in all of the warnings listed below refers to your mains-operated (corded) machine or battery-operated (cordless) machine.
  • Page 6 3. Personal safety A. Stay alert, watch what you are doing, and use common sense when operating the machine. Do not use the machine while you are tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating the machine may result in serious personal injury.

  • Page 7: Lawn Mower Safety Warnings

    performed. Use of the machine for operations different from those intended could result in a hazardous situation. H. Keep handles and grasping surfaces dry, clean and free from oil and grease. Slippery handles and grasping surfaces do not allow for safe handling and control of the machine in unexpected situations.
  • Page 8 D. Before using the lawnmower, always visually inspect to see that the blade and the blade assembly are not worn or damaged. Worn or damaged parts increase the risk of injury. E. Keep guards in place. Guards must be in working order and be properly mounted. A guard that is loose, damaged, or is not functioning correctly may result in personal injury.

  • Page 9: Additional Safety Messages

    Additional Safety Messages Safety-Alert Symbol The safety-alert symbol shown in this manual and on the machine identifies important safety messages that you must follow to prevent accidents. G405934 DANGER indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

  • Page 10: Slope Indicator

    Slope Indicator You may copy this page for personal use. G011841s The maximum slope you can operate the machine on is 15 degrees. Use the slope chart to determine the degree of slope of hills before operating. Do not operate this machine on a slope greater than 15 degrees. Fold along the appropriate line to match the recommended slope.

  • Page 11: Safety And Instructional Decals

    Safety and Instructional Decals Safety decals and instructions are easily visible to the operator and are located near any area of potential danger. Replace any decal that is damaged or missing. Decal Part: 130-0731 Warning—thrown object hazard; keep the deflector in place. Cutting hazard of hand or foot, s_decal130-0731 mower blade—keep away from moving...
  • Page 12 Decal Part: 139-2397 MyRIDE models only s_decal139-2397 Decal Part: 145-3802 s_decal145-3802 The battery pack is charging. The battery pack is over or under the appropriate temperature range. The battery pack is fully charged. Battery pack charging fault. The battery pack charging is on standby while other batteries charge (charging mode dependent).
  • Page 13 Decal Part: 145-8275 Serial charging mode—one battery charges fully at a time (other batteries remain on standby). Parallel charging mode—all batteries are charged to the same level. s_decal145-8275 Decal Part: 147-0290 Warning—light is bright; do not look directly into the light. decal147-0290 Decal Part: 147-7614 Blade control—fast...
  • Page 14 Decal Part: 147-7615 Thrown object hazard—keep bystanders away. Thrown object hazard, mower—do not operate without the deflector, discharge cover, or grass collection system in place. Cutting/dismemberment hazard of hand or foot, mower blade—keep away from moving parts. decal147-7615 Decal Part: 147-7616 MyRIDE models only decal147-7616 Note:...
  • Page 15 Decal Part: 147-7617 Non-MyRIDE models only s_decal147-7617 Note: This machine complies with the industry standard stability test in the static lateral and longitudinal tests with the maximum recommended slope indicated on the decal. Review the instructions for operating the machine on slopes in the Operator’s Manual as well as the conditions in which you would operate the machine to determine whether you can operate the machine in the conditions on that day and at that site.
  • Page 16 Decal Part: 147-7619 Fast Slow Neutral Reverse Traction controls decal147-7619 Decal Part: 147-7620 Fast Slow Neutral Reverse Traction controls decal147-7620 Safety: Safety and Instructional Decals Page 2–12 3463-565 A...
  • Page 17 Decal Part: 147-7621 Read the Operator’s Manual. Full function Limited function No function/extremely limited function decal147-7621 3463-565A Page 2–13 Safety: Safety and Instructional Decals...

  • Page 18: Chapter 3: Product Overview

    Chapter 3 Product Overview MyRide® suspension adjustment lever Battery box Motion-control lever Parking brake Caster wheel Anti-scalp roller Height-of-cut lever Grass deflector Control panel G427499 Battery charger Battery pack (4 included) G448680 Product Overview Page 3–1 3463-565 A...

  • Page 19: Control Panel

    Control Panel Become familiar with all the controls before you start and operate the machine. Blade-speed switch Traction-speed switch Information display Blade-control switch (power takeoff) Key switch G427498 Key Switch Use the key switch to power the machine O . Turn the key past the O position to start the machine.
  • Page 20 Blade-Speed Switch Use the blade-speed switch to select a faster or slower blade speed. Note: Use the F position for best cutting performance; use the S position for less energy consumption. G428591 Blade-Control (PTO) Switch The blade-control switch, represented by a power- takeoff (PTO) symbol, engages and disengages power to the mower blades.
  • Page 21 Information Display (continued) Display Icon The battery temperature The operator is not in the is too high. seat. The blade-control switch The battery load is too (PTO) is engaged. high. The blade-control switch (PTO) is engaged but the machine is preventing the Limp mode is active.

  • Page 22: Parking Brake

    Parking Brake Whenever you shut off the machine, engage the parking brake to prevent accidental movement of the machine. You can use the parking brake to stop the machine in emergency situations or when a machine fault disables the traction controls. G428514 Motion-Control Levers Use the motion-control levers to drive the machine forward, reverse, and turn either...

  • Page 23: Specifications

    Specifications Note: Specifications and design are subject to change without notice. Machine Model 75841 75851 Cutting width 107 cm (42 inches) 137 cm (54 inches) Width with deflector down 136 cm (53-1/2 inches) 166 cm (65-1/2 inches) Width with deflector up 116 cm (45-1/2 inches) 140 cm (55 inches) Length...
  • Page 24 Store the machine, battery pack, and battery charger in an enclosed clean, dry area. Attachments/Accessories A selection of Toro approved attachments and accessories is available for use with the machine to enhance and expand its capabilities. Contact your Authorized Service Dealer or authorized Toro distributor or go to www.Toro.com...

  • Page 25: Chapter 4: Operation

    • This product generates an electromagnetic field. If you wear an implantable electronic medical device, consult your health care professional before using this product. • Use only accessories and attachments approved by Toro. • Do not carry passengers on the machine and keep bystanders and pets away from the machine during operation.

  • Page 26: Installing The Battery Packs

    Installing the Battery Packs Any Flex-Force Power System® battery can be used with the machine. Install at least 3 fully charged batteries, with 4 Ah or higher, for best mowing performance; 2 or fewer batteries, or batteries with lower amperage, may only provide enough power to drive the machine.

  • Page 27: Safety-Interlock System

    Safety-Interlock System The safety-interlock system is designed to prevent the machine from driving or engaging the blades unless the parking brake is disengaged: It also is designed to shut off the blades whenever you rise from the seat. WARNING If the safety-interlock switches are disconnected or damaged, the machine could operate unexpectedly, causing personal injury.

  • Page 28: Positioning The Seat

    Safety-Interlock System (continued) 6. Disengage the blade-control switch. 7. Ensure that the parking brake is engaged and slowly move the motion-control levers forward. The machine should not move, and the information display should show the following icon. G427902 8. Shut off the machine and remove the key. Positioning the Seat Machines with MyRide Suspension G451798...

  • Page 29: Adjusting The Motion-Control Lever Height

    Positioning the Seat (continued) Machines without MyRide Suspension G459819 Adjusting the Motion-Control Lever Height Adjust the motion-control levers higher or lower for your comfort. G441093 3463-565A Page 4–5 Operation: Before Operation...

  • Page 30: Adjusting The Motion-Control Lever Tilt

    Adjusting the Motion-Control Lever Tilt Adjust the motion-control levers forward or rearward for your comfort. 1. Loosen the upper bolt. 2. Loosen the lower bolt enough to pivot the control lever forward or rearward. 3. Tighten both bolts. 4. Repeat the adjustment for the other control lever.
  • Page 31 During Operation Safety (continued) – Use an angle indicator to determine the approximate slope angle of the area. – Never operate on slopes greater than 15°. – Evaluate the site conditions of the day to determine if the slope is safe for machine operation.

  • Page 32: Starting The Machine

    Starting the Machine 1. Sit on the seat. 2. Turn the key switch past the O position and release it. 3. Wait for the splash screen to disappear from the information display before operating the machine (approximately 3 to 5 seconds). Shutting Off the Machine CAUTION Children or bystanders may be injured if they move or attempt to operate the machine...

  • Page 33: Operating The Parking Brake

    Operating the Parking Brake Whenever you shut off the machine, engage the parking brake to prevent accidental movement of the machine. • To engage the parking brake, use your foot to push down the parking-brake pedal and move it left into the detent. •...

  • Page 34: Driving The Machine

    Driving the Machine CAUTION Positioning one lever too far in front of the other causes the machine to spin very rapidly. As a result, you may lose control of the machine, causing personal injury to you and damage to the machine. Slow down the machine before making sharp turns.
  • Page 35 Driving the Machine (continued) 2. Slowly push the motion-control levers forward or rearward. Move 1 lever farther than the other lever to turn. Note: The farther you move the motion- control levers, the faster the machine moves in that direction. 3.

  • Page 36: Operating The Mower Blade-Control Switch (Pto)

    Operating the Mower Blade-Control Switch (PTO) DANGER The rotating blades under the mower deck are dangerous. Blade contact will cause serious injury or death. Do not put your hands or feet under the mower or mower deck when the blades are engaged.

  • Page 37: Side Discharge

    Side Discharge The hinged grass deflector disperses clippings to the side and down toward the turf. DANGER Without the grass deflector, discharge cover, or complete grass catcher assembly mounted in place, you and bystanders are exposed to blade contact and thrown debris.

  • Page 38: Adjusting The Anti-Scalp Rollers

    Adjusting the Anti-Scalp Rollers Whenever you change the height of cut, adjust the height of the anti-scalp rollers. 1. Park the machine on a level surface, disengage the blade-control switch (PTO), and engage the parking brake. 2. Shut off the machine, remove the key, and wait for all moving parts to stop before leaving the operating position.
  • Page 39 Operating Tips (continued) Mowing Frequency Grass grows at different rates at different times of the year. To maintain the same cutting height, mow more often in early spring. As the grass growth rate slows in mid summer, mow less frequently. If you cannot mow for an extended period, first mow at a high cutting height, then mow again 2 days later at a lower height setting.

  • Page 40: After Operation

    After Operation After Operation Safety • Disengage the PTO whenever you are transporting or not using the machine. • Use full-width ramps for loading the machine into a trailer or truck. • Tie the machine down securely using straps, chains, cable, or ropes. Both front and rear straps should be directed down and outward from the machine.
  • Page 41 Charging the Battery Packs (continued) 2. Line up the cavity in the battery pack with the tongue on the charger. 3. Slide the battery pack into the charger until it is fully seated 4. Wait for the battery pack(s) to charge. Refer to the following table to interpret the LED indicator light on the battery charger.

  • Page 42: Hauling The Machine

    Hauling the Machine Use a heavy-duty trailer or truck to haul the machine. Use a full-width ramp. Ensure that the trailer or truck has all the necessary brakes, lighting, and marking as required by law. Please carefully read all the safety instructions. Knowing this information could help you or bystanders avoid injury.
  • Page 43 Hauling the Machine (continued) Full-width ramp(s) in stowed position Side view of full-width ramp in loading position Not greater than 15 degrees Ramp is at least 4 times as long as the height of the trailer or truck bed to the ground H = height of the trailer or truck bed to the ground...
  • Page 44 Hauling the Machine (continued) 4. Back the machine up the ramp. 5. Shut off the machine, remove the key, and engage the parking brake. G414592 6. Tie down the machine using straps, chains, cable, or ropes. Refer to local regulations for tie-down requirements.

  • Page 45: Chapter 5: Maintenance

    Modifying the original machine, parts, and/or accessories may alter the warranty, controllability, and safety of the machine. Making unauthorized modifications to the original machine and/or not using genuine Toro parts could lead to serious injury or death. • Do not make unauthorized modifications to the machine, parts, and/or accessories.

  • Page 46: Recommended Maintenance Schedule

    Recommended Maintenance Schedule Maintenance Maintenance Procedure Service Interval After the first 50 Check the lug-nut torque. hours Check the safety-interlock system. Before each use or Inspect the blades. daily Inspect the grass deflector for damage. Clean grass and debris from the machine. After each use Check the tire pressure.

  • Page 47: Raising The Machine

    Raising the Machine Use jackstands to support the machine when you raise it. WARNING Supporting the machine on the transaxle or motor may damage them and cause the machine to fall, injuring you or bystanders. Do not use the transaxle or motor to lift or support the machine. G454948 3463-565A Page 5–3...

  • Page 48: Electrical System Maintenance

    Electrical System Maintenance Preparing the Battery Pack for Recycling IMPORTANT Upon removal, cover the terminals of the battery pack with heavy-duty adhesive tape. Do not attempt to destroy or disassemble the battery pack or remove any of its components. Lithium-ion battery packs labeled with the Call2Recycle seal can be recycled at any participating retailer or battery recycling facility in the Call2Recycle program (US and Canada only).

  • Page 49: Drive System Maintenance

    Drive System Maintenance Checking the Tire Pressure Maintain the air pressure in the front and rear tires as specified. Uneven tire pressure can cause an uneven cut. Check the pressure at the valve stem when the tires are cold to get the most accurate pressure reading.
  • Page 50 Adjusting the Tracking (continued) G447992 5. Lower the seat. 6. Start the machine and drive it forward across a flat, level surface with both motion- control levers fully forward to verify that the machine tracks straight. Repeat the procedure as needed. Maintenance: Drive System Maintenance Page 5–6 3463-565 A...

  • Page 51: Mower-Deck Maintenance

    Mower-Deck Maintenance Blade Service To ensure a superior quality of cut, keep the blades sharp. For convenient sharpening and replacement, keep extra blades on hand. Replace the blades if they hit a solid object, or if the blade is out of balance or bent. Before Inspecting or Servicing the Blades 1.
  • Page 52 Blade Service (continued) Blade edge previous measured Opposite blade edge G447261 5. Measure from the tip of the blade to the level surface. Blade (in position for measuring) Level surface Measured distance between blade and the surface (B) G447260 6. If the difference between A and B is greater than 3 mm (1/8 inch), replace the blade. Note: If you replace the blade and the difference continues to exceed 3 mm (1/8 inch), the blade motor shaft could be bent.
  • Page 53 WARNING Operating a machine after incorrectly installing the blade assembly and/or not using genuine Toro blade and blade hardware could allow a blade or blade component to be thrown out from under the deck, resulting in serious injury or death.

  • Page 54: Leveling The Mower Deck

    Leveling the Mower Deck Ensure that the mower deck is level any time you install the mower deck or when you see an uneven cut on your lawn. Preparing to Level the Mower Deck 1. Park the machine on a level surface, disengage the blade-control switch (PTO), and engage the parking brake.
  • Page 55 Leveling the Mower Deck (continued) Leveling the Mower Deck 1. Set the anti-scalp rollers to the top holes or remove them completely for this procedure. 2. Set the height-of-cut lever to the 76 mm (3 inch) position. 3. Place 2 blocks, each having a thickness of 6.6 cm (2-5/8 inches), under each side of the front edge of the deck.
  • Page 56 Leveling the Mower Deck (continued) G448684 B. Rotate the height-of-cut plate to a different hole so that it supports the weight of the mower deck after you install the plate. G448681 C. Install the washer and hairpin cotter. D. Repeat the adjustment for the other side of the machine. E.
  • Page 57 Leveling the Mower Deck (continued) A. Rotate the adjustment nut in the front of the mower deck. To raise the front of the deck, tighten the adjustment nut; lower the front of the deck, loosen the adjustment nut. G448683 B. Check the front-to-rear level and adjust it again until the measurements are correct. 7.

  • Page 58: Brake Maintenance

    Brake Maintenance Testing the Parking Brake 1. Start the machine. 2. Slowly drive the machine forward on level ground and engage the parking brake while moving. 3. Verify that the machine stops moving and the parking brake icon appears on the information display, then move the levers to neutral.

  • Page 59: Cleaning

    Cleaning Cleaning Under the Mower Deck Clean the underside of the mower deck after each use to prevent grass buildup for improved mulch action and clipping dispersal. IMPORTANT Do not use water to clean the mower deck, otherwise you could damage the electric motors.

  • Page 60: Chapter 6: Storage

    Chapter 6 Storage Storing the Machine Store the machine, battery pack, and charger only in temperatures that are within the appropriate range; refer to Specifications, page 3–6. 1. Park the machine on a level surface, disengage the blade-control switch (PTO), and engage the parking brake.

  • Page 61: Chapter 7: Troubleshooting

    Chapter 7 Troubleshooting Machine Troubleshooting The machine vibrates abnormally Possible Cause Corrective Action The cutting blade(s) is/are bent or Install new cutting blade(s). unbalanced. The blade mounting bolt is loose. Tighten the blade mounting bolt. The blade spindle is bent. Contact an Authorized Service Dealer.

  • Page 62: Battery And Charger Troubleshooting

    Battery and Charger Troubleshooting The battery system loses charge quickly. Possible Cause Corrective Action The battery system is over or under the Move the machine to a location where it is appropriate temperature range. dry and the temperature is within the range indicated in Specifications.
  • Page 63 The LED indicator light on the battery charger is red. Possible Cause Corrective Action The battery charger and/or battery pack is Unplug the battery charger and move the over or under the appropriate temperature battery charger and battery pack to a range.

  • Page 64: Display Error And Fault Code Troubleshooting

    Display Error and Fault Code Troubleshooting Before diagnosing an error, shut off the machine, remove the key, and remove the batteries. Error Icons Description Icon Corrective Action Shut off the machine, remove the battery, and The battery temperature is too wait for the battery to cool.
  • Page 65 System for Fault First 2 Digits of Code System Power management unit (PMU)—battery box Primary controller Left traction motor Right traction motor 83, 84, or 85 Blade motor Power Management Unit (PMU) Faults Last 2 Digits of Fault Description Corrective Action Code Restart the machine;...
  • Page 66 Power Management Unit (PMU) Faults (continued) Last 2 Digits of Fault Description Corrective Action Code Remove and charge the battery. Install the battery. If issues persist, replace the battery or contact an Authorized Service Dealer. Ensure that the battery is installed properly.
  • Page 67 Primary Controller Faults (continued) Code Fault Description Corrective Action A fault occurred in the right motion- Check for loose connections; if issues 80-XXX-08 control sensor. persist, contact an Authorized Service Dealer. There is no CAN signal for the blade Check for loose connections; if issues 80-XXX-10 controller (refer to the serial number to persist, contact an Authorized Service...
  • Page 68 Traction/Blade Motor Controller Faults (continued) Code Fault Description Corrective Action 82-XXX-02 83-XXX-02 84-XXX-02 85-XXX-02 81-XXX-07 82-XXX-07 Clear any obstructions; if issues The motor rotor is locked. persist, contact an Authorized Service 83-XXX-07 Dealer. 84-XXX-07 85-XXX-07 81-XXX-10 82-XXX-10 The motor rotor operates too fast. Contact an Authorized Service Dealer.
  • Page 69 Traction/Blade Motor Controller Faults (continued) Code Fault Description Corrective Action 84-XXX-19 85-XXX-19 81-XXX-20 82-XXX-20 There is a gate driver integrated circuit Contact an Authorized Service Dealer. 83-XXX-20 (IC) component error. 84-XXX-20 85-XXX-20 81-XXX-21 82-XXX-21 Check for loose connections; if issues The connector on the motor phase is persist, contact an Authorized Service 83-XXX-21...
  • Page 70 Traction/Blade Motor Controller Faults (continued) Code Fault Description Corrective Action 81-XXX-28 82-XXX-28 There is a flash data validation error. Contact an Authorized Service Dealer. 83-XXX-28 84-XXX-28 85-XXX-28 81-XXX-29 82-XXX-29 There is an MCU non-maskable Contact an Authorized Service Dealer. 83-XXX-29 interrupt error.

  • Page 71: Chapter 8: Schematic: Electrical Diagram

    Chapter 8 Schematic: Electrical Diagram Machines with 2 Blades G465696 3463-565 A Page 8–1 Schematic: Electrical Diagram...
  • Page 72 Machines with 3 Blades G465734 Schematic: Electrical Diagram: Display Error and Fault Code Page 8–2 3463-565 A Troubleshooting...

  • Page 73: California Proposition 65 Warning Information

    Toro has chosen to provide consumers with as much information as possible so that they can make informed decisions about the products they buy and use. Toro provides warnings in certain cases based on its knowledge of the presence of one or more listed chemicals without evaluating the level of exposure, as not all the listed chemicals provide exposure limit requirements.
  • Page 74 Notes:...
  • Page 75 Notes:...

This manual is also suitable for:

Etimecutter 75851

Table of Contents