Catalytic converter
The exhaust system contains catalytic
converter(s) to reduce harmful exhaust
emissions.
WARNING
The exhaust system is hot after op-
eration. To prevent a fire hazard or
burns:
Do not park the vehicle near
possible fire hazards such as
grass or other materials that
easily burn.
Park the vehicle in a place
where pedestrians or children
are not likely to touch the hot
exhaust system.
Make sure that the exhaust sys-
tem has cooled down before
doing any maintenance work.
Do not allow the engine to idle
more than a few minutes. Long
idling can cause a build-up of
heat.
EAU13435
Seats
Passenger seat
EWA10863
To remove the passenger seat
1. Insert the key into the seat lock,
and then turn it counterclockwise.
2 2
1. Seat lock
2. Unlock.
2. Lift the front of the passenger seat
and pull it forward.
To install the passenger seat
1. Insert the projections on the rear
of the passenger seat into the seat
holders as shown, and then push
the front of the seat down to lock
it in place.
Instrument and control functions
EAU92640
1. Projection
2. Seat holder
2. Remove the key.
1 1 1
Rider seat
To remove the rider seat
1. Remove the passenger seat.
2. Remove the cap, then push the
5-26
1
rider seat lock lever, located under
the back of the rider seat, to the
left as shown, and then pull the
seat off.
2
5