hit counter script
Yamaha NMAX GPD155 2020 Owner's Manual
  1. Manuals
  2. Brands
  3. Yamaha Manuals
  4. Motorcycle
  5. NMAX GPD155 2020
  6. Owner's manual

Yamaha NMAX GPD155 2020 Owner's Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

GPD155
GPD155

Advertisement

Table of Contents
loading

Related Manuals for Yamaha NMAX GPD155 2020

Summary of Contents for Yamaha NMAX GPD155 2020

  • Page 1 GPD155 GPD155...
  • Page 2 EAU46091 EAU46091 EAU46091 Baca buku panduan dengan teliti sebelum mengendalikan motosikal ini. Buku panduan diberi bersama dengan pembelian motosikal.
  • Page 3 Welcome to the Yamaha world of motorcycling! As the owner of the GPD155 , you are benefiting from Yamaha’s vast experience and newest technology regarding the design and manufacture of high-quality products, which have earned Yamaha a reputation for dependability.
  • Page 4 EAU10134 Particularly important information is distinguished in this manual by the following notations: WARNING NOTICE A TIP provides key information to make procedures easier or clearer. *Product and specifications are subject to change without notice.
  • Page 5 EAUN0430...

  • Page 6: Table Of Contents

    Helmet holders......5-14 Engine oil and oil strainer ..... 8-11 ... 1-1 Final transmission oil ....8-13 Storage compartments ....5-14 Coolant ......... 8-15 Power outlet .........5-16 ......2-1 Air filter and V-belt case air Sidestand ........5-17 Further safe-riding points ....2-5 filter elements......
  • Page 7 Replacing a front turn signal light bulb ........8-31 Replacing a rear turn signal light bulb ........8-32 Troubleshooting ......8-33 Troubleshooting chart ....8-35 ..9-1 Matte color caution .......9-1 Care ..........9-1 Storage ..........9-3 ........10-1 ....11-1 Identification numbers....11-1 Vehicle data recording ....11-2 ..........12-1...
  • Page 8 EAUN2190 Read and understand all of the labels on your vehicle. They contain important information for safe and proper operation of your vehicle. Never remove any labels from your vehicle.
  • Page 9 WARNING 100kPa=1bar kPa, psi kPa, psi 150,22 200, 29 150,22 200, 29...
  • Page 10 should receive training from a cer- EAU1028C tified instructor. Contact an autho- Wear a brightly colored jacket. As the vehicle’s owner, you are re- rized motorcycle dealer to find out Use extra caution when you are sponsible for the safe and proper oper- about the training courses nearest approaching passing...
  • Page 11 The use of a jacket, heavy boots, Know your skills and limits. both feet on the operator foot- trousers, gloves, etc., is effective Staying within your limits may rests during operation to main- in preventing or reducing abra- help you to avoid an accident. tain control of the motorcycle.
  • Page 12 Choosing accessories for your vehicle tion of the motorcycle is changed. To torcycle to minimize imbalance or is an important decision. Genuine avoid the possibility of an accident, use instability. Yamaha accessories, which are avail- extreme caution when adding cargo or...
  • Page 13 Yamaha dealer, have namic effects. Wind may at- been designed, tested, and approved death. You are responsible for injuries tempt to lift the motorcycle, or by Yamaha for use on your vehicle.
  • Page 14 provide the best combination of han- the location for the straps carefully wet. Slow down and cross them dling, braking, and comfort. Other so the straps will not rub against with caution. Keep the motorcycle tires, rims, sizes, and combinations painted surfaces during transport.
  • Page 15 EAUN0532 Operating this vehicle without an ap- proved motorcycle helmet increases your chances of a severe head injury or death in the event of an accident. The ZAUU0005 majority of fatalities from motorcycle or scooter accidents are the result of Full-face-type: use for riding at head injuries.
  • Page 16 EAU10411 1. Storage compartment A (page 5-14) 9. V-belt case air lter element (page 8-17) 2. Power outlet (page 5-16) 3. Fuel tank cap (page 5-11) 4. Tool kit (page 8-1) 5. Rear storage compartment (page 5-14) 6. Air element (page 8-17) 7.
  • Page 17 EAU10421 10 9 8 1. Tail/brake light 9. Engine oil drain bolt B (page 8-11) 2. Battery (page 8-28) 10.Engine oil cap (page 8-11) 3. Storage compartment B (page 5-14) 4. Fuse box (page 8-30) 5. Headlight (page 8-31) 6. Coolant reservoir (page 8-15) 7.
  • Page 18 EAU10431 1. Rear brake lever (page 5-11) 9. Main switch (page 5-1) 2. Left handlebar switches (page 5-9) 3. Rear brake uid reservoir (page 8-23) 4. Multi-function meter unit (page 5-3) 5. Front brake d reservoir (page 8-23) 6. Right handlebar switches (page 5-9) 7.
  • Page 19 System. 2. Set the Stop and Start System emissions, and reduce fuel consump- Have a Yamaha dealer check the switch to “ ”. tion. battery at the intervals speci ed in When the rider turns the throttle grip the periodic maintenance chart.
  • Page 20 3. When the vehicle con rms that the following conditions are met, the Stop and Start System activates and the Stop and Start System in- dicator light comes on. The Stop and Start System switch is set to “ ”. After the engine was warmed up, the engine was left idling for a certain period of time.
  • Page 21 Stop and Start System is de- activated. If the Stop and Start System does EWA18751 not operate correctly, have a Yamaha dealer check the vehicle. EAU76711 In order to prevent accidents due to improper operation, carefully read and observe the following precautions.
  • Page 22 EWA18771 EWA18781...
  • Page 23 EAUN0264 To lock the steering The meter lighting comes on auto- matically when the key is turned to “ON”. The fuel pump can be heard when the key is turned to “ON”. LOCK EAU76120 All electrical systems are off. The key can be removed.
  • Page 24 To unlock the steering EAU61101 EAU77122 “ PUSH SHUT ” switch From “LOCK” position push the key in Keyhole shutter key and turn to “OFF” position. 1. Left turn signal indicator light “ ” To open the keyhole shutter High beam indicator light “ ”...

  • Page 25: Stop And Start System

    This warning light comes on if a prob- lem is detected in the engine or other vehicle control system. If this occurs, have a Yamaha dealer check the on- board diagnostic system. When the vehicle is turned on, this light should come on for a few seconds and 1.
  • Page 26 5. Push the “MENU” switch for 1 repeatedly. If this occurs, have a 5. Push the “MENU” switch until the second to con rm the setting. Yamaha dealer check the vehicle. minute digits stop ashing. The setting is con rmed.
  • Page 27 If a problem is detected in the electrical switch. The display unit setting circuit, all segments will ash repeat- screen will come on (after 5 sec- edly. Have a Yamaha dealer check the onds), and after that (an additional vehicle. 10 seconds) all segments othe...
  • Page 28 EAU86900 ODO and F/ECO TRIP 1 and AVE EAU86890 F/ECO TRIP 2 and AVE F/ECO TRIP F BATT OIL TRIP V-BELT TRIP ODO and F/ECO The fuel reserve tripmeter appears only when you are low on fuel. The oil change tripmeter and V- belt replacement tripmeter are not displayed while the vehicle is moving.
  • Page 29 EAU86910 EAU86920 When the engine oil has been changed, the oil change tripmeter and the oil change indicator must be reset. Otherwise, the oil change indicator will not come on at the correct time. EAU86930 1. Fuel reserve tripmeter 1. Oil change indicator “OIL” 2.
  • Page 30 ter start ashing. While “V-BELT” and “km/L”: the average distance that “km/L”: the distance that can be the tripmeter are ashing, push the can be traveled on 1.0 L of fuel. traveled on 1.0 L of fuel. “MENU” switch until the tripmeter is “L/100 km”: the average amount “L/100 km”: the amount of fuel reset.
  • Page 31 EAU1234N This display shows the current charge state of the battery. Over 12.8 V = Full charge. Under 12.7 V = Charging is re- quired. If the battery voltage is less than 9.0 V, “_ _._” is displayed. 1. Stop and Start System switch “ ”...

  • Page 32: Multi-Function Meter Unit

    turn, push this switch to “ ”. When ECA10062 EAU12902 NOTICE released, the switch returns to the cen- ter position. To cancel the turn signal lights, push the switch in after it has re- turned to the center position. EAU12501 EAU59011 Press this switch to sound the horn.

  • Page 33: Rear Brake Lever

    EAUN2571 EAU12952 To open the fuel tank cap lid, turn the main switch to “OPEN” position and push the “FUEL” button. 1. Fuel tank cap lid 2. Fuel tank cap 1. Rear brake lever To install the fuel tank cap, turn it clockwise until the “...
  • Page 34 EAU13213 EWA10132 Make sure there is suf cient gasoline in the tank. EWA10882 1. Fuel tank ller tube 2. Maximum fuel level 1. Before refueling, turn off the en- 3. Wipe up any spilled fuel immedi- gine and be sure that no one is sit- NOTICE: ately.

  • Page 35: Fuel Tank Overflow Hose

    EAU86150 EAU13435 The exhaust system contains catalytic converter(s) to reduce harmful exhaust emissions. EWA10863 EAUU0045 Regular unleaded gasoline (E10 ac- ceptable) 7.1 L (1.9 US gal, 1.6 Imp.gal) 1. Fuel tank w hose The over ow hose drains excess gaso- ECA11401 NOTICE line and directs it safely away from the...

  • Page 36: Seat

    EAU37482 EAUN2612 This model is equipped with 3 storage 1. Insert the mechanical key into the compartments. The front storage com- keyhole, and then turn to “OPEN” partments and rear storage compart- position. ment are located as shown. 1. Helmet holder The helmet holders are located under the seat.
  • Page 37 Some helmets cannot be stored in the Do not leave your vehicle unattended rear storage compartment because of with the seat open. their size or shape. ECA21150 EWA18950 NOTICE To open storage compartment B, pull up the storage compartment lid to un- lock it, and then open.

  • Page 38: Power Outlet

    EAUN2161 EWAN0050 1. Turn the vehicle power off. This model is equipped with a 12V DC 2. Remove the power outlet cap. power outlet. 3. Turn the accessory off. 4. Insert the accessory plug into the power outlet. 5. Turn the vehicle power on and start the engine.
  • Page 39 EAU15306 EAUT1098 The sidestand is located on the left Check the operation of the sidestand side of the frame. Raise the sidestand switch according to the following pro- or lower it with your foot while holding cedure. the vehicle upright. The built-in sidestand switch is part of the ignition circuit cut-off system, which cuts the ignition in certain situa-...
  • Page 40 WARNING Turn the main switch on. The vehicle must be placed on the centerstand during this inspection. Put the sidestand up. If a malfunction is found, have the vehicle inspected before riding. Push the start switch while applying either of the brake levers. The engine will start.
  • Page 41 EAU1559A Inspect your vehicle each time you use it to make sure the vehicle is in safe operating condition. Always follow the inspection and maintenance procedures and schedules described in the Owner’s Manual. EWA11152 Before using this vehicle, check the following points: Check fuel level in fuel tank.
  • Page 42 Check hydraulic system for leakage. Make sure that operation is smooth. Check throttle grip free play. 8-19, 8-25 If necessary, have Yamaha dealer adjust throttle grip free play and lubricate ca- ble and grip housing. Make sure that operation is smooth. 8-25 Lubricate if necessary.
  • Page 43 Make sure that all nuts, bolts and screws are properly tightened. — Tighten if necessary. Check operation. — Correct if necessary. Check operation of ignition circuit cut-off system. 5-17 If system is not working correctly, have Yamaha dealer check vehicle.
  • Page 44 0 and 1600 km (1000 mi). For understand, ask your Yamaha dealer. this reason, you should read the fol- EWA10272 lowing material carefully.
  • Page 45 5. Release the start switch when the EAU86740 EAUN0073 engine starts, or after 5 seconds. The ignition circuit cut-off system will ECAN0072 Wait 10 seconds before pressing NOTICE enable starting when the sidestand is the switch again to allow battery be up.
  • Page 46 EAU45093 EAU16782 EAU60650 1. While pulling the rear brake lever EWA17790 with your left hand and holding the grab bar with your right hand, push the scooter off the center- stand. ZAUM0199 The speed can be adjusted by opening and closing the throttle. To increase the speed, turn the throttle grip in di- rection (a).
  • Page 47 EAU16821 EAU77861 When parking, turn off the Stop and Start System and then stop the engine. Fuel consumption depends largely on After turning off the main switch, be your riding style. Consider the follow- sure to remove the key and take it with ing tips to reduce fuel consumption: you.

  • Page 48: Tool Kit

    However, a torque EWA10322 wrench and other tools are necessary to perform certain maintenance work correctly. If you do not have the tools or experi- ence required for a particular job, have your Yamaha dealer perform it for you.
  • Page 49 EAUU0621 From 20000 km, repeat the maintenance intervals starting from 4000 km. Items marked with an asterisk should be performed by a Yamaha dealer as they require special tools, data and tech- nical skills. EAUU1294 Check fuel hoses for cracks or damage.
  • Page 50 EAUU1287 Perform dynamic inspection us- ing Yamaha diagnostic tool. Check the error codes. Clean. Clean. Replace if necessary. Check voltage. Charge if necessary. Check operation, uid level and vehicle for uid leakage. Check operation, uid level and vehicle for uid leakage.
  • Page 51 Check for cracks or damage. Check for correct routing and clamping. Check runout and for damage. Check tread depth and for dam- age. Replace if necessary. Check air pressure. Correct if necessary. Check bearings for looseness or damage. Check bearing play and steering for roughness.
  • Page 52 Check operation. Lubricate with lithium-soap- based grease. Check operation. Check operation and for oil leak- age. Check operation and shock ab- sorbers for oil leakage. Change. When the oil change indicator ashes Check oil level and vehicle for oil Every 4000 km (2500 mi) leakage.
  • Page 53 Check for damage and wear. ] ) i Check operation. Lubricate. Check operation. Check throttle grip free play, and adjust if necessary. Lubricate cable and grip housing. Check operation. Adjust headlight beam.
  • Page 54 EAU66860 Air lter This model’s air ter is equipped with a disposable oil-coated paper element, which must not be cleaned with com- pressed air to avoid damaging it. The air lter element needs to be replaced more frequently when riding in unusually wet or dusty areas. V-belt case air lter The air lter needs more frequent service if you are riding in unusually wet or dusty areas.
  • Page 55 EAU18773 To remove the panel 1. Remove panel A. The panels shown need to be removed 2. Remove the quick fasteners and to perform some of the maintenance the bolt. jobs described in this chapter. Refer to this section each time a panel needs to be removed and installed.
  • Page 56 To install the panel 3. Remove the right oorboard mats 1. Place the panel in the original po- by pulling them up. sition, and then install the bolts and screw. 2. Place the right rboard mats in their original position and push them downward to secure them.
  • Page 57 If the spark plug shows a distinctly dif- ferent color, the engine could be oper- 0.8–0.9 mm (0.031–0.035 in) ating improperly. Do not attempt to diagnose such problems yourself. In- stead, have a Yamaha dealer check the vehicle. 1. Spark plug cap 8-10...
  • Page 58 EAU66993 1. Clean the surface of the spark The engine oil level should be checked plug gasket and its mating sur- before each ride. In addition, the oil face, and then wipe off any grime must be changed and the oil strainer from the spark plug threads.
  • Page 59 The engine oil should be between the 1. Start the engine, warm it up for tip of the dipstick and the maximum several minutes, and then turn it level mark. off. 2. Place an oil pan under the engine to collect the used oil. 3.

  • Page 60: Lubrication Chart

    If any leakage is found, have a 32 N·m (3.2 kgf·m, 24 lb·ft) oil change indicator “OIL”. Yamaha dealer check and repair your ll with the speci d amount of motorcycle. In addition, the nal trans- the recommended engine oil, and...

  • Page 61: Final Transmission Oil

    6. Install the nal transmission oil 8. Install the nal transmission oil ll drain bolt and its new gasket, and er cap and its new O-ring, and then tighten the bolt to the speci- then tighten the oil ller cap. d torque.

  • Page 62: Coolant

    EAU20071 The coolant should be between the The coolant level should be checked minimum and maximum level marks. before each ride. In addition, the cool- ant must be changed at the intervals speci d in the periodic maintenance and lubrication chart. EAUN2170 1.
  • Page 63 EAU33032 The coolant must be changed at the in- tervals speci ed in the periodic main- tenance and lubrication chart. Have a Yamaha dealer change the coolant. 8-16...
  • Page 64 1. Check the hose on the rear side of EAU67174 3. Pull the air lter element out. the air lter case for accumulated dirt or water. The air ter element should be re- 2. If dirt or water is visible, remove placed and the V-belt case air lter el- the hose from the clamp, clean it, ement should be cleaned at the...
  • Page 65 If dirt or water was found in the check hose, be sure to check the V-belt case air lter element for excessive dirt or damage and clean or replace it if nec- essary. 5. Install the air lter case cover by installing the screws.
  • Page 66 Measure the throttle grip free play as shown. Yamaha foam air ter oil or other quality foam air lter oil 5. Insert the element into the V-belt case. 1. V-belt case air ter element 6.

  • Page 67: Tires

    To prevent this from occurring, have Front: your Yamaha dealer check and adjust Rear: the valve clearance at regular intervals. The tire air pressure should be 200 kPa (2.00 kgf/cm , 29 psi) checked and, if necessary, adjusted before each ride.
  • Page 68 (minimum tread depth), if the tire 110/70-13M/C 48P has a nail or glass fragments in it, or if Manufacturer/model: the sidewall is cracked, contact a IRC/SS-570F Yamaha dealer immediately and have Size: the tire replaced. This model is equipped with tubeless 130/70-13M/C 63P Manufacturer/model: tires and tire air valves.

  • Page 69: Brake Lever Free Play

    There should be no free play at the EAU21963 EAU50861 brake lever ends. If there is free play, To maximize the performance, durabil- have a Yamaha dealer inspect the ity, and safe operation of your vehicle, brake system. note the following points regarding the EWA14212 spec ed wheels.
  • Page 70 EAU22393 EAU22583 peared, have a Yamaha dealer replace Before riding, check that the brake uid the brake pads as a set. is above the minimum level mark. The front and rear brake pads must be...
  • Page 71 EAU22734 Have a Yamaha dealer change the brake uid every 2 years. In addition, have the seals of the master cylinders and brake calipers, as well as the brake hoses replaced at the intervals listed below or sooner if they are damaged or leaking.
  • Page 72 EAUU0311 EAU23098 EAU49921 The V-belt must be checked and re- placed by a Yamaha dealer at the inter- The operation of all control cables and The operation of the throttle grip vals speci d periodic the condition of the cables should be should be checked before each ride.

  • Page 73: Brake Levers

    EAU23173 EAU23215 Silicone grease The operation of the centerstand and sidestand should be checked before each ride, and the pivots and metal-to- metal contact surfaces should be lubri- cated if necessary. EWA10742 The pivoting points of the front and rear brake levers must be lubricated at the intervals speci d in the periodic main- tenance and lubrication chart.
  • Page 74 EAU23273 Lithium-soap-based grease The condition and operation of the front fork must be checked as follows at the intervals speci d in the periodic maintenance and lubrication chart. Check the inner tubes for scratches, damage and excessive oil leakage. ECA10591 NOTICE 1.

  • Page 75: Checking The Wheel Bearings

    If any free (See page 5-14.) hub or if the wheel does not turn play can be felt, have a Yamaha This model is equipped with a VRLA smoothly, have a Yamaha dealer dealer check or repair the steer- (Valve Regulated Lead Acid) battery.
  • Page 76 3. Fully charge the battery before in- stallation. NOTICE: Have a Yamaha dealer charge the bat- tery as soon as possible if it seems to have discharged. Keep in mind that the 8-29...
  • Page 77 3. Remove the blown fuse, and then If the fuse immediately blows again, install a new fuse of the speci ed have a Yamaha dealer check the elec- amperage. trical system. 5. Install the panel C. (See page 8-30...
  • Page 78 If a light does not come stand. on, check the fuse and then have a 2. Remove the turn signal light bulb Yamaha dealer check the vehicle. socket (together with the bulb) by turning it counterclockwise. 1. Turn signal light bulb 4.
  • Page 79 EAU67320 1. Open the seat. (See page 5-14.) 2. Remove the grab bar by removing the bolts. 1. Turn signal light bulb 1. Taillight cover 2. Screw 6. Insert a new bulb into the socket. 7. Install the socket (together with 4.
  • Page 80 EAU76843 for checking these vital systems your- self. However, should your vehicle re- quire any repair, take it to a Yamaha If a problem occurs, check the follow- dealer, whose skilled technicians have ing before taking the vehicle to a the necessary tools, experience, and Yamaha dealer.
  • Page 81 Yamaha dealer check the vehi- In addition, the Stop and Start System cle as soon as possible. indicator light does not come on if the engine trouble warning light is on.
  • Page 82 Remove the spark plug and check the electrodes. The engine does not start. Have a Yamaha dealer check the vehicle. Check the compression. 4. Compression The engine does not start. There is compression.
  • Page 83 Start the engine. If the engine overheats again, have a The coolant level Yamaha dealer check and repair the cooling system. is OK. If coolant is not available, tap water can be temporarily used instead, provided that it is changed to the recommended cool- ant as soon as possible.
  • Page 84 Genuine Yamaha care and main- tenance products are sold under the YAMALUBE brand in many markets worldwide. See your Yamaha dealer for addi- tional cleaning tips. ECA26280 NOTICE 1. Park the vehicle out of direct sun- light and allow it to cool. This will...
  • Page 85 2. Make sure all caps, covers, elec- 2. Wash the vehicle with a quality au- trical couplers and connectors are 1. Dry the vehicle with a chamois or tomotive-type detergent mixed tightly installed. with cool water and a soft, clean absorbent towel, preferably mi- 3.
  • Page 86 6. Touch up minor paint damage EAU83472 caused by stones, etc. Always store the vehicle in a cool, dry 7. Wax all painted surfaces using a place. If necessary, protect it against non-abrasive wax or use a detail dust with a porous cover. Be sure the spray for motorcycles.

  • Page 87: Battery

    1. Make all necessary repairs and b. Pour a teaspoonful of engine wheels a little once a month in or- perform any outstanding mainte- oil into the spark plug bore. der to prevent the tires from be- nance. c. Install the spark plug cap onto coming degraded in one spot.
  • Page 88 Overall length: SAE viscosity grades: Type: 1935 mm (76.2 in) 10W-40 Tubeless Overall width: Recommended engine oil grade: Size: 740 mm (29.1 in) API service SG type or higher, JASO 110/70-13M/C 48P Overall height: standard MA or MB Manufacturer/model: 1160 mm (45.7 in) Engine oil quantity: IRC/SS-570F Seat height:...
  • Page 89 Model: YTZ6V Voltage, capacity: 12 V, 5.0 Ah (10 HR) Headlight: Brake/tail light: Front turn signal light: 10.0 W Rear turn signal light: 10.0 W Auxiliary light: License plate light: 5.0 W 10-2...
  • Page 90 Record the vehicle identi cation num- ber and the engine serial number in the spaces provided below for assistance when ordering spare parts from a Yamaha dealer or for reference in case the vehicle is stolen. VEHICLE IDENTIFICATION NUMBER: 1. Vehicle identi ation number 1.
  • Page 91 Yamaha will not disclose this data to a third party except in the following cas- es. In addition, Yamaha may provide vehicle data to a contractor in order to outsource services related to the han- dling of vehicle data.

Table of Contents