Page 2
Operation Manual Sewing Machine Product Code: 888-X64/X74/X84/X67/X77/X87 Be sure to read this document before using the machine. We recommend that you keep this document nearby for future reference.
Return the machine to the - To reduce the risk of electric shock: nearest authorized Brother dealer or service center for examination, repair, Always unplug the machine from electrical or mechanical adjustment.
Page 4
• Your close attention is necessary For additional product information, when the machine is used by or near visit our web site at www.brother.com children. • The plastic bag that this machine was supplied in should be kept out of the reach of children or disposed of.
Page 5
Brother Service Center to knowledge, unless they have obtain the correct lead. been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
Model KD-2902 for 220-240V area 8 Needle threader (Page 19) The foot controller part code differs depending on the country or region. Contact your Brother dealer or the (This is only available on certain models.) nearest authorized Brother Service Center.
Do not place heavy objects on the cord. Do not subject the cord to heat. These things may damage the cord and cause fire or electric shock. If the cord or plug is damaged, take the machine to your authorized Brother Service Center for repairs before continuing use. ●...
If problems occur, such as difficulty turning the handwheel or an unusual noise, immediately stop using the machine, and contact your authorized Brother Service Center or the nearest authorized Brother Service Center. Precautions on storing the Using the screwdriver, remove the two machine screws.
Page 43
For a new bobbin case (part code: XE9326-001), contact your nearest authorized Brother Service Center. • Align the ▲ and ● marks. ● Make sure that you fit the bobbin case properly, otherwise the needle may break.
If the machine stops operating correctly, check the following possible problems before requesting service. You can solve most problems by yourself. If you need additional help, the Brother Solutions Center offers the latest FAQs and troubleshooting tips. Visit us at “ http://support.brother.com ”. If the problem persists, contact your Brother dealer or the nearest authorized Brother Service Center.
Page 45
The area around the hole in the needle Contact your retailer or the nearest – plate or the presser foot is scratched. The upper authorized Brother Service Center. thread Replace the bobbin case. breaks. The bobbin case is scratched, or has a burr Contact your retailer or the nearest –...
Page 48
Please visit us at http://support.brother.com where you can get product support and answers to frequently asked questions (FAQs). English 888-X64/X74/X84/X67/X77/X87 Version 0...