hit counter script

Advertisement

SIEMENS CLIMATIX
Dry Cooler manual
C400 – POL468.65/STD
1 |
P u s l a p i s

Advertisement

Table of Contents
loading

Summary of Contents for Siemens CLIMATIX C400

  • Page 1 SIEMENS CLIMATIX Dry Cooler manual C400 – POL468.65/STD P u s l a p i s...
  • Page 2: Table Of Contents

    SIEMENS CLIMATIX Table of contents Display ..................................3 POL871.72/STD ..............................3 1.1.1 Connecting to user profile ........................3 Connecting to service profile ........................4 1.1.2 1.1.3 Alarm list ..............................5 Web service access ............................5 Control logic ................................8 Turning on system ............................. 8 Dry cooler control (Dry Cooler control) ......................
  • Page 3: Display

    SIEMENS CLIMATIX 1 Display 1.1 POL871.72/STD Pic 1. POL871.72/STD 1.1.1 Connecting to user profile Connect to “User“ profile. Hold “Enter“ button for 3 seconds. Pic. 2 Button placement After 3 seconds screen changes to Pic. 3. P u s l a p i s...
  • Page 4: Connecting To Service Profile

    SIEMENS CLIMATIX Pic. 3 Login screen User password is 1000 and it can be entered by “Up” and “Down” buttons and confirm selection press „Enter“. When correct password is entered in the right corner one key icon will be showed.
  • Page 5: Alarm List

    SIEMENS CLIMATIX Pic. 5 Login screen User password is 2000 and it can be entered by “Up” and “Down” buttons and confirm selection press „Enter“. When correct password is entered in the right corner two key icon will be showed.
  • Page 6 SIEMENS CLIMATIX Pic. 7 Authentication required Enter user name and password: User name: WEB Password: SBTAdmin! When entered correctly user should see: Pic. 8 Web server pin Enter user or service Pin for required access level. P u s l a p i s...
  • Page 7 SIEMENS CLIMATIX Pic. 9 Web server P u s l a p i s...
  • Page 8: Control Logic

    SIEMENS CLIMATIX 2 Control logic Turning on system System starts to work then Main switch On/Off and Display/Comm On/Off both is in ON state. Dry cooler control (Dry Cooler control) Fan speed is regulated by output temperature of glycol. If temperature is closer to setpoint fan power is increased.
  • Page 9: Communications

    SIEMENS CLIMATIX 3 Communications Possible communications: Modbus RTU by default: Baud rate 19200 , Parity EVEN, Stop bits 1, Word length 8 bit. Modbus TCP/IP port: 502. Modbus list parameters: Parameters Address Read/Write Gain Mode Main switch Off/On Read Display/Comm. Off/On...

This manual is also suitable for:

Pol871.72/std

Table of Contents