Installation Overview
Figure 18: Installing O-ring on the M12 Adapter
1
M12 adapter
3
O-ring installed on M12 adapter
Step 2
Align and plug the 4-pin Micro-Fit connector into the power port of the chassis. Press M12-PWR adapter onto the chassis,
and ensure that the wires are not pinched.
1
4-pin Micro-Fit DC connector
2
M12-PWR adapter
Step 3
Torque to 15-20 in-lbs to tighten the M12 adapter captive screws into the chassis.
2
3
Cisco Catalyst IW9165D Heavy Duty Access Point Hardware Installation Guide
Connecting DC Power Port Using M12 Adapter
O-ring
Captive screws
31